Product selection from
DELTA
Description
This 10-in contractor table saw provides the function and flexibility you need on the job. The 15-amp motor generates enough power to rip thick stock or challenging dado, while the cast-iron tabletop offers a sturdy and roomy workspace. The T-Square locking rip fence provides precise cuts that are accurate to 1/64-in, and the steel rails with spreader have the capability to handle even the widest stock. The integrated dust collection system allows wet/dry vacuum hookup to the 2.5-in dust port, keeping sawdust mess to a minimum. The locking bevel and height adjustment wheels provide consistency when making repetitive cuts, and 3/4-in wide miter gauge T-slots accommodate accessories such as feather boards. The tubular rolling stand means you can easily transport the saw around the jobsite as needed.
- Includes saw, rolling stand, 10-in blade and locking rip fence
- 13-amp enclosed induction motor generates 3,600-RPM to rip thick stock or challenging dados
- 10-In carbide-tipped blade is durable and the built-in arbor lock allows for quick and easy blade changes
- 30-In right rip capacity and 15-in left rip capacity accommodates a wide range of sizes
- T-Square 3-point locking rip fence provides precise cuts, and steel rails with spreader accommodates the widest stock
- Easy-to-assemble tubular stand with easy-lift caster system
- 5-Year limited warranty
- Cast-iron 27.13-in L x 20.24-in W tabletop offers plenty of workspace
- Locking bevel and height adjustment wheels allow for consistency when making repetitive cuts
Product specifications
Amps
15
Arbor Diameter
5/8-in
Auxiliary Handle
No
Base Warranty Labor(Months)
60
Base Warranty Parts(Months)
60
Battery Warranty Labor(Months)
0
Battery Warranty Parts(Months)
0
Bevel Capacity(deg)
45
Blade Included
Yes
Blade Material
Carbide-tipped
Blade Size(cm)
25.4
Blade Size (in)
10
Blade Size(mm)
254.0
Caster Platform Included
Yes
Cordless
No
Cutting Depth(cm)
7.9375
Cutting Depth (in)
3.125
Cutting Depth(mm)
79.375
Depth Control
Yes
Dust Handling
Chute
File/Certification Number
20190827-E129484
Left Rip Capacity(cm)
38.1
Left Rip Capacity(in)
15
Left Rip Capacity(mm)
381.0
Maximum Blade Speed(RPM)
3600
Maximum Depth at 45 Degrees(cm)
6.35
Maximum Depth At 45 Degrees (in)
2.5
Maximum Depth at 45 Degrees(mm)
63.5
Maximum Depth at 90 Degrees(cm)
8.89
Maximum Depth At 90 Degrees (in)
3.5
Maximum Depth at 90 Degrees(mm)
88.9
Micro Adjust Rip Fence
No
Model Description
15-Amp 10-in Contractor Table Saw (1)
Motor Warranty Labor(Months)
60
Motor Warranty Parts(Months)
60
Portable
No
Repetitive Cut Marking System
No
Right Rip Capacity(cm)
76.2
Right Rip Capacity (in)
30
Right Rip Capacity(mm)
762.0
Safety Listing
UL safety listing
Saw Blade Diameter
10-in
Series Name
Contractor saws
Spindle Lock
Yes
Stand Type
Fixed
Table Height (cm)
93.98
Table Height (in)
37
Table Height (mm)
939.8
Table Length (cm)
68.9102
Table Length (in)
27.13
Table Length (mm)
689.102
Table Width (cm)
51.4096
Table Width (in)
20.24
Table Width (mm)
514.096
Type
Contractor
Voltage
120
Warranty
5-year limited
Weight (kg)
99.792
Weight(lbs.)
220
Worm Drive
No
Frequently bought together
SPYDER
Spyder Fine Cut Miter Saw Blade in Tungsten Carbide - 10-in 60 Teeth
Format 10"x60TH
Details
Article #65165021
METABO HPT
Metabo HPT Set of Mitre Saw Blades - Carbide - Assorted - 10-in dia
Format 10"xPK3
Details
Article #37815174
CRAFTSMAN
Craftsman Plywood Circular Saw Blade - 7 1/4-in Dia - 140T - High Speed Steel
Format 7 1/4"x140TH
Details
Article #00276818
CRAFTSMAN
Craftsman General Purpose Circular Saw Blade - 10-in Dia - 40T - ATB Grind Geometry - Carbide Teeth
Format 10"x40TH
Details
Article #00276814
CRAFTSMAN
Craftsman Circular Saw Blade - Carbide - Fine Finish - 60 Teeth - 10-in dia
Format 10"x60TH
Details
Article #00276815
EXCHANGE-A-BLADE
EAB Green RazorTooth Finishing Circular Saw Blade - Alloy Steel - 10-in Dia - 80 Tooth
Format 10"
Details
Article #34595954
STIRLING TRAILERS
Galvanized Steel Expandable Trailer - 5' x 10'
Format 5x10'
Details
Article #22435002
STIRLING TRAILERS
Stirling Trailers Galvanized Steel Expandable Trailer - 4-ft x 8-ft
Format 4x8'
Details
Article #22435000
STIRLING TRAILERS
Galvanized Steel Expandable Trailer - 5' x 8'
Format 5x8'
Details
Article #22435001
STIRLING TRAILERS
Stirling Trailers Steel Utility Trailer 4-ft x 6-ft with Ramp Gate
Format 4x6'
Details
Article #22435005
CARRY-ON TRAILER
Trailer with Removable Rear Panel - 3 1/2-ft x 5-ft - Black
Format 3.5x5'
Details
Article #30738276
CARRY-ON TRAILER
Carry-On Trailer Next Gen 5-ft x 8-ft Wire Mesh Utility Trailer with Ramp Gate
Format 5x8'
Details
Article #31475039
You may also like
DEWALT
Dewalt Compact Jobsite Table Saw - 8 1/4-in Blade, 15 A
Format 8 1/4"x15AM
Details
Article #00277225
BOSCH
Bosch 4100XC-10 Worksite Corded Table Saw - 10-in - Gravity-Rise Wheeled Stand
Format 10"x15AM
Details
Article #19836366
KOBALT
Kobalt 15 A Portable Table Saw - Carbide-Tipped Blade - 10-in
Format 10"x15AM
Details
Article #41095003
METABO HPT
Metabo HPT Jobsite Table Saw with Rolling Stand - 10-in - 15 A
Format 10"x15A
Details
Article #37815184
PERFORMANCE PLUS
King Canada Performance Plus 10-in Table Saw with Riving Knife
Article #331002057
TRITON TOOLS
Triton Tools Table Saw Module - 26-in x 16.5-in - Orange/Black
Article #330668640
Is the motor 13 or 15 amp? The title says 13A, but the specifications say 15A.
This is 15amp. Title is wrong on the Lowe’s website.
Date published: 2023-02-20
Unavailable as of at least Feb 2021. Any idea when it might be available?
what is the dimension of the table and fence
What is the motors hp
Does it come with the trim fence add on? If not is it available instore or do i have to get from Delta? Thanks
Contractor Saws 10-in Carbide-Tipped Blade 15-Amp Fixed Table Saw is rated
out of
5 by
275.
Rated 4 out of
5
by
Wood99 from
For the price and it is quieter then the Bosch.
I bought it from Lowe’s it was boxed nicely and had no damage. Assembly was pretty easily the rail system is a little tricky just take your time to get things right. The fence was also a little tricky to set up to my liking but is worth it. Being able to move it around very easily is nice. The miter gauge is nice and has a convenient storage spot. It is powerful enough and dust collection is ok. I did find a zero clearance throat plate and added a new blade which made a nice difference. I will be making a out feed table off a video I watched ,why these companies don’t design and offer a out-feed beats me. So far I really like the saw and would recommend it.
Date published: 2022-04-30
Rated 4 out of
5
by
Injuneer from
Not bad at all
Upgraded from my 25 year old Craftsman. Obvious differences were the size & weight. The outfeeds are metal, not cast iron and assembly took longer than I expected but all in all this is a very good deal for the money. After calibration I found it to be true and using the 5 cut method I was able to get it to 3/1000's without much effort. The fence & miter are spectacular and extremely accurate, in fact the only fault I honestly see is there is no extension kit for the rails to allow cutting larger than 30". A longer extension that can be bought and added would be a nice feature, in case anyone from Delta is paying attention!
Date published: 2020-11-01
Rated 4 out of
5
by
Heath from
Great saw
So I've had this saw for a couple of weeks now and it's been great. Cuts smooth and straight. It's pretty quite for a table saw. Haven't cut any hardwoods on it yet, but what I have used so far it does the job no problem. Dust collection doesn't seem perfect, but it's not bad either. My only complaint is that some of the parts were dinged and dented when I opened the box.Hasnt seem to hinder the performance at all though. Just a little disappointing to find it like that out of the box after waiting several months for this saw to come out. Still, all in all I would recommend it.
Date published: 2020-04-12
Rated 4 out of
5
by
Bootleggers Mill from
Nice saw
Pros: over all… nice saw. The opening of the box and set up was fairly easy to do. I checked the squareness of the blade to the table. I used a machinist square and set the zero there. It cut perfectly square. Then I used the fence to see how accurate it was right out of the box. Right on the money there! It has a very nice fence with added bonus. There’s an extra little fence that sits on top of it, for doing little stuff. The saw is quite quiet for being the size it is.
Cons: the biggest one for me is the dust collection! That leaves a lot to be desired! Going to have to figure out better way to seal those holes! I got as much as my shop vac as I did on the floor.
Date published: 2022-06-12
Rated 5 out of
5
by
MrPither from
I love it
I researched for a while and decided on this Delta. I wanted a saw I could move around but still had the larger capacity and a nice fence. The contractor saws were too small and flimsy. This thing is exactly what I wanted. Assembly is pretty easy and it didn't take long to get everything squared. I sometimes use the saw outside the shop on the driveway so I needed an extension cord. I bought a 10 gauge, 20 amp cord. They aren't cheap but they give the saw the amperage it needs. I think a lot of the motor complaints on this saw are due to people using a 15 amp circuit. Delta should have put a T plug on the saw to make sure people use a 20 amp circuit.
Date published: 2021-12-12
Rated 2 out of
5
by
Mike from
Smoking motor
I bought my saw back in may and assembled it right away. It worked great had no complaints I cut some hardwoods but mostly plywood and softwoods. I probably used it a total of 6 run hours. Then one day I went to start the saw and the blade barely moved and motor started smoking, I called delta but they want me to take it to a shop 50 miles away and pay for parts shipment. I also have to show proof of purchase but my reciept is faded and cant be read and even though I used my credit card to purchase they wont help me. I would recommend this saw if the warranty wasn't just complete crap.
Date published: 2020-10-11
Rated 5 out of
5
by
Matt from
Huge upgrade over job site saw.
I upgraded from a Dewalt job site saw and it was a night and day difference. The motor is quiet, the cast iron top is a big upgrade over the plastic top of the Dewalt, the fence is rock solid, love how the blade is more aft which increases the support of the workpiece prior to cutting, and the motor is plenty powerful. I got some Frued blades for it and used the plywood blade to make a garage cabinet out of 3/4” maple plywood. The saw and blade worked perfectly, cut straight with not one chip at all. I bought the saw to make home and shop furniture and am glad I chose this one.
Date published: 2022-08-12
Rated 5 out of
5
by
Mike from
Details
I like this saw very much. for its capabilities, it is very fairly priced
The setup, especially the attachment of the side rails is critical. If you carefully set it up you'll have a flat surface.
Don't tighten the side rails. Use the included gauge to go back and forth to make sure it is even before finally tightening the rails. You may have t0 do this for some time but it's worth it if you ant the extensions to be true to the table. Spending an hour or so on calibrating the saw will give you the results you want
Date published: 2022-07-06
Helpful Links
Customer Services
About RONA
