Product selection from CUT-N-SEAL

Add to wish list

Cut-N-Seal Waterproofing Wood Sealant - Sienna Brown - 946 ml

Article #59795315 Model #AA574200 Format 946ML

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Add to wish list

Description

Cut-N-Seal Sienna brown sealant provides superior protection for wood. It is a ready-to-use brush-on sealer and moisture repellent for drilled holes or saw cuts in pressure treated wood exposing an untreated surface above ground. It is water-based and has a low VOC content and odor. This wood sealant is made for use on decking, railings, post tops or fence boards where appearance counts. It is not to be used on wood in contact with ground, in preserved wood foundations, to recoat pressure treated wood surfaces or as a replacement for pressure treatment. 946 ml.

Cut-n-seal is a ready to use brush-on sealer and moisture repellent for cuts and holes which exposes wood previously treated
Water-based formula has low voe and low odor
Sienna brown is a close colour match for cuts and holes where appearance counts such as railings, decking, post tops and fence boards
Soap and water cleanup
Ready to use

Product specifications

Algae Resistant

Application Method

Brush/Roll

Base Material

Water-based

Clean-up Method

Soap and water

Color/Finish Family

Brown

Combustible

Container Size

Quart size container

Dry to Touch

1-2 hours

Dry to Walk

1-2 hours

Exterior Stain Type

Semi-transparent

Flammable

Flash Point(deg)

For Use on Composite Decking

For Use on Concrete

Furniture Ready

4 hours

Low VOC

Yes

Manufacturer Color/Finish

Sienna Brown

Maximum Coverage Area(ft2)

026.3

Maximum Coverage Area(m2)

2.44327

Maximum Working Temperature (Celsius)

-17.77777778 Celsius

Maximum Working Temperature (Fahrenheit)

0 Fahrenheit

Mildew Resistant

Minimum Coverage Area(ft2)

23.67

Minimum Coverage Area(m2)

2.198943

Minimum Working Temperature (Celsius)

4.44444444 Celsius

Minimum Working Temperature (Fahrenheit)

40 Fahrenheit

Mold Resistant

Paint Color Family

Brown

Pre-Tinted

Recommended Surfaces

Horizontal/Vertical

Stain and Sealer in One

Yes

Stain Color

Sienna Brown

Sub-Brand

Cut-N-Seal

Tintable

Unit of Measure

Fluid ounce(s)

Unit of Measure Quantity

31.9881

Use Location

Exterior

UV Protection

Warranty

Limited

Waterproof

Package Quantity

Tint Base

Brown

For Use on Wood

Yes

For Use with Decking

Yes

For Use with Fencing

Yes

For Use with Siding

For Use with Furniture & Cabinets

can this be used on ordinary wood, not only pressure treated.

Asked by: Bangkok Bill

can this product be used to maintain the brown colour of my deck .

Asked by: border 48

Cut-N-Seal Waterproofing Wood Sealant - Sienna Brown - 946 ml is rated 4.7 out of 5 by 7.

Rated 5 out of 5 by MickeyMoose from Covers really well.Recoated deck and looks new. I have been using the product every second year to re-seal my sienna brown deck. They say not to use it as a sealer more than once but after 6 years and three coats the deck comes out looking brand new. Rain water beads off like a new wax job on your car.

Date published: 2020-09-08

Rated 5 out of 5 by Roller from EXCELLENT! I applied to it 2 years ago to brand-new Micro-Pro Sienna pressure treated lumber that I had sanded down and it looks as good as it did two years ago. A wonderful product ... make sure you buy the gallon size as the 946 ml runs out too fast and is priced too high vs. the 3.78L size.

Date published: 2021-04-22

Rated 4 out of 5 by macquanski from Good Colour Match to MicroSienna PT lumber Building a new deck so ensuring longevity was a factor in ensuring that cut ends had protection. The colour match was pretty much bang on. In hindsight, I used so much (sloppy in my application) that I should have bought the gallon rather than 2 of the 946 ml cans. Will it help prolong the life of the deck? I don't think I'll be here long enough to confirm.

Date published: 2017-10-10

Rated 4 out of 5 by SandyMcD from Easy to apply I used this for my deck ends. Can't comment on long term quality yet but very easy to apply with a paint brush and easy to clean up spills and brushes. I used the "green" and it blended in fine on my pressure treated cedar.

Date published: 2018-06-22

Rated 5 out of 5 by JJ Merr from Cut N Seal Great for the deck. Really helps and I like the color

Date published: 2022-04-15

Rated 5 out of 5 by Baron from Wish it was available in 4 litre container Very happy with the results, matches new PT lumber, requires large amounts to cover if using non-PT

Date published: 2021-06-21