Product selection from CRAFTSMAN

Craftsman Fixed-Blade Utility Knife - 3 Blades - 5.5-in - Red

Add to wish list

Craftsman Fixed-Blade Utility Knife - 3 Blades - 5.5-in - Red

Article #00276642 Model #CMHT10377 Format 5 1/2"

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Add to wish list

Description

This 5 1/2" (14 cm) fixed blade knife by Craftsman® offers a strong blade retention system, allowing for safe and efficient heavy-duty cutting. Also, the textured handle is designed for long use and increased durability, while the nose overlaps at the top and bottom grant it added strength. Includes 3 utility blades. This product is backed by a limited lifetime warranty.

Includes (1) Fixed Blade Utility Knife; (3) Blades
Common applications include general cutting purposes
Includes 3 utility blades
Nose overlaps at top and bottom for added strength
Super-duty cast metal textured handle designed for long, tough use
Positive fixed blade retention for heavy-duty cutting

Product specifications

Sub-Brand

N/A

Snap-Off Blade

Blade Length(cm)

6.0325

Blade Length(in)

2.375

Blade Length(mm)

60.325

Blade Material

Carbon steel

Blade Width(s)

3/4-in

Finish Family

Steel-painted

Folding

Handle Length(cm)

13.97

Handle Length(in)

5.5

Handle Length(mm)

139.7

Handle Type

Zinc casting

Number of Blades Included

On Tool Blade Storage

Package Quantity

Retractable

Yes

Series Name

N/A

Rated 4 out of 5 by VinLam from My knife is different I found this product using the US patent number. My knife is actually a kit made in Germany. In the see through case there are a rotary cutting attachment (very handy), 6" long toothed blades(like a Sabre saw), blade cassettes, and other unusual blades. Problem is, I can't seem to remove the rubber cover over the screw that holds the two haves together and permits blade changes.

Date published: 2023-04-13

Rated 1 out of 5 by Philip from Unsafe Design Flaw There are teeth to hold the blade in place, but they are positioned wrong. Due to the design of the knife, I am unable to use both teeth (as I'm supposed to) to hold the slots of the blade. The only option is to position the blade further forward than designed, causing it to stick out too far and creating an unsafe tool.

Date published: 2022-03-24

Rated 4 out of 5 by Patti from Nice sharp knife [This review was collected as part of a promotion.] It is a nice sharp knife, but I wish my husband had read the package, as the blade doesn't retract. That's the only complaint I have. I think any knife with a blade like this should automatically be retractable.

Date published: 2019-11-26

Rated 4 out of 5 by Minerva from Couldn't Get the Screw Out As soon as I brought the knife home from the store, I tried to install the blade. I couldn't get the screw to turn more than a quarter-turn. I kept trying, rocking it left and right, and finally I was able to force it to fully rotate. The rest of the rotations seemed to be hampered, but I finally got it out. Upon examining the screw, I could see shiny threads in between the screw's threads. I wrangled them out with my fingernail onto a flat surface. I looked down inside the threaded hole and could see lots of curly threads showing themselves in the screw hole. I coaxed them out by screwing a piece of a paper towel around the inside, again, depositing them on a surface. I took a (lousy) photo of them after sandwiching them between two pieces of transparent tape. You can see all the curly little metal shards. The structure of the screw seemed to be somewhat lopsided rather than truly cylindrical. I guess you could say all's well that ends well, but it shouldn't have been such a struggle just to get the first blade inserted.

Date published: 2022-11-21