Product selection from
CRAFTSMAN
Description
Craftsman 10-amp bench jointer with 6000 to 11000 RPM speed range features a heavy-duty motor that can cut through hard and soft woods. Two knife cutter head with jack screw knife levelling arrangement makes for easy knife replacements and adjustments, and ensures maximum stock removal. Built-in speed dial gives you a wide range of control, and 4.25-in center-mounted fence provides needed support throughout the cut for accurate edge jointing. Backed by a 3-year limited warranty, 1 year of free service and 90 days satisfaction warranty.
- 10-Amp motor for hard and soft woods
- Dual knife cutter head for maximum stock removal
- 4-1/4-in center mounted fence for support and accuracy
- Variable speed for range of control
Product specifications
Accessories Included
No
Adjustable Depth Stops
No
Amperage(Amps)
10
Assembled Height (cm)
45.085
Assembled Height (in)
17.75
Assembled Height (mm)
450.85
Assembled Width (cm)
16.51
Assembled Width (in)
6.5
Assembled Width (mm)
165.1
Base Warranty Labor(Months)
36
Base Warranty Parts(Months)
36
Battery Warranty Labor(Months)
36
Battery Warranty Parts(Months)
36
Blade Length(cm)
15.24
Blade Length (in)
6
Blade Length(mm)
152.4
Blade Material
Steel
Color/finish Family
Gray
Depth Adjustment
Yes
Depth Measurement System
No
Dust Collection
Yes
Fence Height(cm)
91.44
Fence Height (in)
36
Fence Height(mm)
914.4
Fence Length(cm)
50.165
Fence Length (in)
19.75
Fence Length(mm)
501.65
Fence Material
Aluminum
Fence Tilt
Yes
Fence Tilt Range in Degrees
45
Heavy Duty Stand Included
No
Helical Head
No
Lock On Switch
No
Maximum Board Thickness(cm)
0.3175
Maximum Board Thickness (in)
0.125
Maximum Board Thickness(mm)
3.175
Maximum Board Width(cm)
15.24
Maximum Board Width (in)
6
Maximum Board Width(mm)
152.4
Maximum Cutting Depth(cm)
0.3175
Maximum Cutting Depth (in)
0.125
Maximum Cutting Depth(mm)
3.175
Maximum RPM
11000
Model Description
CRAFTSMAN 10 AMP Bench Jointer
Motor Warranty Labor(Months)
36
Motor Warranty Parts(Months)
36
Number Of Blades
2
Positive Stops
Yes
Quick-change Knife System
No
Rabbeting Depth(cm)
0.15875
Rabbeting Depth (in)
0.0625
Rabbeting Depth(mm)
1.5875
Table Length (cm)
76.2
Table Length (in)
30
Table Length (mm)
762.0
Table Material
Aluminum
Table Width (cm)
16.002
Table Width (in)
6.3
Table Width (mm)
160.02
Tool Weight(kg)
15.876
Tool Weight(lbs.)
35
Variable Speed
Yes
Voltage(Volts)
120
Warranty
3-year limited
Frequently bought together
CRAFTSMAN
Craftsman 120 V 8-Gal. 3.5 HP Corded Portable Wet/Dry Shop Vacuum
Format 8GA 3.5HP
Details
Article #66435002
You may also like
DEWALT
Dewalt 12 1/2-in Corded Bench-Top Planer - 15-A Motor - 1/8-in Cutting Depth - Quick Knife Change
Format 12.5"x15A
Details
Article #0834236
DEWALT
Dewalt Corded Bench-Top Planer - 15-A Motor - 3 Knife Cutter - 2 Gear Speed
Format 13"x15A
Details
Article #0027167
KING INDUSTRIAL
King Canada 6-in Benchtop Jointer with Helical Cutterhead
Article #331002082
KING INDUSTRIAL
King Canada 8-in Benchtop Jointer with Helical Cutterhead
Article #331002029
PERFORMANCE PLUS
King Canada Performance Plus 3-1/4-in Portable Planer Kit
Article #331002048
Craftsman Benchtop Jointer - 10 A is rated
out of
5 by
96.
Rated 5 out of
5
by
Jf from
It is the Porter Cable with the Craftsmans badge
[This review was collected as part of a promotion.] Got this after i couldn't find the Porter Cable around anymore. Out of the box set up was easy. Fence angle is alitte touchy, but got it dailed in pretty good. This is the same jointer as the Porter Cable, B+D must own the Craftsman name now. Imo is a good thing. They also make Dewalt! Anyway read reviews for the Porter Cable and apply them to this jointer/planer. For the price point on this jointer im very happy so far. Don't know about long-term but today worked well. Only using as a jounter so far as i have a 13" planer. But i believe if i needed to plane somrthing real quick it would work fine. Great for budget small workshop!!!
Date published: 2019-09-07
Rated 4 out of
5
by
TEllis from
Craftsman Jointer works well
[This review was collected as part of a promotion.] Similar to one of the other reviews, bought it because the Porter-Cable was no longer offered. So far, I found it to be a good alternative. The instructions to set it up were straight forward and made it easy setup out of the box. I'd seen a lot of criticism of setting up other brand bench Jointers fences. The Craftsman on appearance looked similar to other makes fences. So I was concerned, but it turned out I had zero issues with my Craftsman. So far I’ve used the jointer for making a picture frame and joining a spruce two piece guitar top. Both pieces were under 3 feet. I would of given it a higher rating if I’d used it more, but so far so good it has met all my needs!
Date published: 2019-09-08
Rated 4 out of
5
by
SpudState from
Decent machine
There are a lot of negative reviews on here for this jointer but it really works well. I used it first for some 2x6x88 pallet boards and it only struggled with it due to the table lengths. I made an extended in and out feed table and worked like a champ. There is a rotor lock that was probably the culprit for most of the negative reviews, it likes to bounce around a bit and seems dangerous. If it catches, the machine won’t work and then it’ll probably pop the internal circuit breaker. Not rocket science. But it is avoidable.
Date published: 2021-03-01
Rated 5 out of
5
by
Jeff from
Very impressed
I purchased the craftsman jointer a week ago. I was struggling with the reviews but took the plunge. I found the set up simple. Didn’t need directions. Very straight forward. Hooked up the dust port simple enough. Started working and have been using it since I have a moderate shop and restore and refinish antiques. I also custom build various furnitures. Been at near 40 years. I have really enjoyed the results of this jointer Have had several of the big boys in the past For the money, can’t go wrong
Date published: 2021-04-14
Rated 1 out of
5
by
Raybob50 from
I have had this jointer for approximately six months. I have only made passes at less then 1/32". It was working fine until today. I made a pass with 3/4" hardwood turned it off, went back to make a pass with another board and it would not start. There is power going to and from the switch. After reading some of the negative reviews I assume the motor has given out.
What has happened to Craftsman?
Date published: 2021-08-15
Rated 1 out of
5
by
Azcopper from
Died Twice
Purchased at Lowe’s. One week later, it didn’t work at all. Swapped it for another. Two months later, this one dies mid board.
Date published: 2020-09-04
Rated 4 out of
5
by
EJ from
Good enough
[This review was collected as part of a promotion.] Making a keepsake box for my daughter and have some red oak logs that I board cut. I needed to plane and joint the red oak pieces of wood. I’m happy With the results of this jointer planer. Time will tell for long term use but I’m confident craftsman wood working tools.
Date published: 2019-11-20
Rated 3 out of
5
by
Jake from
Good but Not adjustable
[This review was collected as part of a promotion.] Bought this because Craftsman offers a 90 day money back guarantee. Couldn’t get the indeed and outfeed tables co-planer without some substantial diy-fabricating. From the shelf they peaked enough to prohibit running long ripped 2x4 boards. It caused concave results and will be upgrading. The quality outside of that issue was great and Craftsman’s customer service was great.
Date published: 2019-09-01
Helpful Links
Customer Services
About RONA
