Countertop Coating System - White

Salut, Les autres surfaces sur lesquelles notre kit de transformation de comptoir peut être appliqué sont le bois dur et les garnitures en métal. Malheureusement, nous ne pouvons pas garantir qu'il collera au plastique. Nous vous recommandons d'apprêter la garniture en plastique de notre apprêt Bulls Eye 123. Ensuite, vous pouvez appliquer la couche de base et la couche de finition après avoir terminé le projet.

Hi Tammy, Our Countertop Coating was designed for laminate countertops but can also be applied to hardwood or metal trim.

Salut crocro, Malheureusement, nous ne recommandons pas nos Transformations de comptoir pour les surfaces en céramique.

Hi Richard13, We do not recommend this product for a shower stall. We recommend trying our Tub & Tile Refinishing kit instead.

Hi Caroline12345, When yellowing occurs, that is a sign that the coating was applied to thick. We recommend sanding down those areas and reapplying the top coat.

Hi Netty, We do recommend waiting as you do not want to damage the surface and have to start do unnecessary touch-ups.

The Mica Countertop Transformation covers 50 sq Ft. A. Thoroughly stir the Base Coat using a stir stick. Pour a portion of the Base Coat into a clean paint tray. B. Starting with the backsplash, use a 50 mm (2”) synthetic brush to apply an even coat of Base Coat. C. Be sure that your coverage includes 2-5 cm (1-2”) of the flat countertop surface that connects to the backsplash. This will prevent your roller from accidentally bumping into the backsplash while rolling. D. Working from back-to-front, use the enclosed 150 mm x 10 mm (6” x 3/8”) nap roller to apply an even coat of Base Coat over the entire countertop. Then use the brush again to coat any tight spaces (i.e. around the sink or in the corners). Roller Brush Hold the roller at a high angle when rolling on the Base Coat for a smooth application. E. For each section, once the Base Coat has been applied to the entire surface then re-roll in one, uniform direction towards your body. F. After the Base Coat has been applied, quickly inspect the entire countertop for sags, mistakes, or areas of thin coverage. Apply more Base Coat where necessary. To repair accidental bumps, see “Preparation and Repair” in the FAQ section. G. After the first coat has dried for at least 2 hours or until the inside edges are dry, repeat steps A-F and apply a second even coat of Base Coat. H. Once the second coat is dry to the touch (approx. 2 hours) and before it completely dries, be sure to remove the tape by first scoring it around the edges. I. For maximum adhesion of the clear Mica top coat to the base coat, lightly sand the base coat with sanding pad after it has dried overnight. Apply the Protective Top Coat within 24 hours of applying the Base Coat. Allow the coating to dry overnight. However apply the Protective Top Coat within 24 hours of applying the Base Coat. And you don't need a mask.