
Sump Pump with Mechanical Switch - 1/3 HP - Plastic
Article #13335004
Model #300500Z
Format 1/3HPx115V
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Hassle-Free Returns
90 days to return or exchange in original condition and packaging.
Read Return Policy
Warranty
2-year
Description
This sump pump pumps up to 11,350 LPH and provides a maximum suction lift of 18' so you can clean everything easily and rapidly. The pump functions with a mechanical switch. The motor housing is made of aluminum and the pump base is made of thermoplastic for longevity. Electric cable of 8'. This product is backed by a 2-year warranty from the date of purchase.
- Zinc-plated motor housing for longer motor life
- Oil-cooled motor with automatic thermal and overload protection
- Corrosion-resistant thermoplastic pump body
- Replaces upright and submersible sump pumps and designed for a permanent installation in a 14-inch diameter or larger sump basin

Product specifications
Base Warranty Labor(Months)
24
Alarm Included
No
Amperage
4
Application
Replaces pedestal and submersible sump pumps and designed for a permanent installation in a 14'' diameter basin and larger
Base Warranty Parts(Months)
24
Battery Backup
No
Battery Voltage
N/A
Collection Name
N/A
Cord Length(cm)
243.84
File/Certification Number
LR061751
Cord Length(ft)
8
Electronics Warranty Labor(Months)
0
Electronics Warranty Parts(Months)
0
Gallons per Minute(gal)
50
Gallons per Minute(l)
189.27
Horsepower (HP)
0.33 HP
Impeller Material
Thermoplastic
Inlet Connection
N/A
Inlet Diameter
1.5 inch
Material
Thermoplastic
Maximum PSI
0
Outlet Connection
NPT
Outlet Diameter
1.5 inch
Package Contents
Submersible sump pump with tethered float
Package Quantity
1
Power Source
Electric
Safety Listing
cCSAus safety listing
Sub Type
Submersible sump pump
Submersible
Yes
Switch Type
Tethered
Tank Warranty Labor(Months)
0
Tank Warranty Parts(Months)
0
Type
Water pump
Volts
115
Warranty
2-year
Water Flow(GPM)
50
Check Valve
No
Pump Horsepower
1/3-HP
Vertical Lift
0 ft lift, 18 ft head
Country of Origin
CA - CANADA
1/3 HP submersible pumpModel 300500 How to adjust the float switch to reduce maxinum wate level. Pump can not be set lower in the sump
The float is adjusted during the assembly process for an optimum use. When the pump stop, you need to make sure that the lowest water level does not allow any air to enter in the pump chamber. Respecting this, the setting may be modify. You can use the rigid discharge pipe to hold the float cord at the proper level to turn the pump on and off as per your needs. Finally, the distance between the beginning of the float and the cord holding device which pivots the float must remain no shorter than 4 inches.
Date published: 2024-02-25