
Description
This cast iron surface well jet pump has a 25-foot capacity and a built-in ejector. It has an enclosed, fan cooled motor that is continuously powered by a capacitor so that it doesn't wear out during start and stop. It's also protected against overload and overheating and has 1 in NPT suction and discharge ports. Capacity at 30 PSI: 715 GPH/5 ft, 630 GPH/10 ft, 575 GPH/15 ft, 500 GPH/20 ft, 450 GPH/25 ft.
- Large, easy-to-prime cast iron body
- 115/230V dual voltage totally enclosed fan-cooled motor with automatic thermal and overload protection and a full-time run capacitor
- Bearing to bearing stainless steel motor shaft
- 1-Inch suction and discharge
Product specifications
Battery Backup
No
Alarm Included
No
Amperage
8
Application
For use in the home, cottage or farm, in conjunction with a pressure tank , to pump water from a potable water source such as a shallow well, lake, cistern or pond where the vertical suction lift is less than 25 feet
Base Warranty Labor(Months)
24
Base Warranty Parts(Months)
24
Battery Voltage
N/A
Collection Name
N/A
Cord Length(cm)
0.0
Cord Length(ft)
0
Electronics Warranty Labor(Months)
0
Electronics Warranty Parts(Months)
0
File/Certification Number
LR061751
Gallons per Minute(gal)
11.83
Gallons per Minute(l)
44.781282
Horsepower (HP)
0.5 HP
Impeller Material
Thermoplastic
Inlet Connection
NPT
Inlet Diameter
1 inch
Material
Cast iron
Maximum PSI
65
Outlet Connection
NPT
Outlet Diameter
1 inch
Package Contents
Shallow well jet pump with pressure switch and pressure gauge
Package Quantity
1
Power Source
Electric
Safety Listing
cCSAus safety listing
Sub Type
Shallow well jet pump
Submersible
No
Switch Type
Specialty
Tank Warranty Labor(Months)
0
Tank Warranty Parts(Months)
0
Type
Water pump
Volts
115 and 230
Warranty
2-year
Water Flow(GPM)
11.83
Check Valve
No
Pump Horsepower
1/2-HP
Vertical Lift
25 ft