Product selection from
BOSTITCH
Description
These flooring nails feature a coated finish that eases penetration and increases holding power. The L shaped cleat fits properly into tongue and groove hardwood flooring. Fits the following Bostitch tools: MIIIFN, MFN-200, MFN-201.
- Coated finish eases penetration and increases holding power
- L shaped cleat fits properly into tongue and groove hardwood flooring
- Quantity: 1,000 flooring cleats
- Fits the following Bostitch tools: MIIIFN, MFN-200
Product specifications
Use Location
Interior
Shank Type
Smooth
Finish
Coated
Base Warranty Parts(Months)
0
Base Warranty Labor(Months)
0
Package Weight(kg)
1.72368
Number of Pieces
1000
Gauge
16
Length(in)
2.0
Package Weight(lbs.)
3.8
ANSI Safety Listing
No
Collated
Yes
Gauge (Gauge)
16 Gauge
Head Type
L-shaped
Length Measurement
2-in
Package Quantity
1000
Type
Flooring
Unit of Measure
Count
Penny (d)
6d
Size
6D
Length(mm)
50.8
Length(cm)
5.08
Manufacturer Color/Finish
Silver/coated
Collation Material
Adhesive
Material
Steel
Warranty
None
You may also like
RAMSET
Ramset Power Actuated Disc Load - Yellow - 1/4-in dia Calibre - 100 Loads
Format CAL.25xBT/100
Details
Article #2293137
Will these work with BOSTITCH BTFP12569 2-in-1 Flooring Tool?
Perfect
Date published: 2019-05-28
approximately how many cleats are required to install 1000 sq ft of 2 1/4" boards? Thanks.
You need at least 2 boxes
Date published: 2021-02-26
are cleats better than staples for 3/4 inch solid hardwood
generally speaking yes they are better they help reducing the crack on the tongue of the hardwood and hold the floor better
Date published: 2018-02-13
Bostitch 2-in 16-Gauge Collated Flooring Nail (1000-Pack) is rated
out of
5 by
52.
Rated 5 out of
5
by
greenghost from
Great nails!!
Bought these nail for my pre finished oak hard wood floor. Nails worked great even in the cheap offbrand pnematic nailer!! Decription dosent say but they will nail down 200 sq ft of 3 1/2 inch flooring per box nailing them every 6-8 inches!! Nails wont break or pull out of subfloor so if you missfire one you gotta use the side cutters to clip the head off then set them with a nail set!!
Date published: 2013-05-03
Rated 5 out of
5
by
JudM from
nails work great in my Harbor Freight 16 gauge gun
Packaging nor Lowe's website identify these as 16 gauge flooring cleats.
Date published: 2015-01-20
Rated 4 out of
5
by
petes450se from
Be careful with the package labels
Please note that these are 16 Guage cleats. I could not find anywhere in the Lowe's description of this product that says this. I needed 18 Guage cleats.
Date published: 2016-03-17
Rated 5 out of
5
by
Phil from
for a more perfect installation
These nails worked with the nail gun that I used. We tried other less-expensive cleats but they would jam and not give a continuous smooth operation on the installation of 3/4" wood.
Date published: 2015-03-22
Rated 5 out of
5
by
Jay from
Goes through Hickory 3/4 hardwood
[This review was collected as part of a promotion.] I used these on quite a bit of flooring. I tried staples on the first 300 square feet and fought those things the whole way. They just sometimes would not drive in the hickory and would fold and I would have to pull them out with 90 degree pliers. This was painstaking.
So I figured out how to load these into the flooring gun after some research. I used these on the rest of the house. Go in every time. I have had only one in over 5000 nails to not drive. These are holding all my flooring pretty well. Many people say the staples hold better but if they wont drive in then to me they aren't going to work.
Very glad these are made. They will pull some warped boards back straight.
Date published: 2019-08-03
Rated 5 out of
5
by
Jane from
Bostitch Floor Nails
I got these nails to use with my Bostitch Floor Nailer. I credit the tool itself for doing an outstanding job, but I bet generic nails wouldn't have been so easy to work with. I replaced the entire floor in my house, some with tiles but most with hardwood flooring. Not once did the nailer jam. Not once did a nail fail. I can't say enough good things about this quality tool and nails.
Date published: 2018-04-16
Rated 5 out of
5
by
Chuck from
Bamboo Floring
[This review was collected as part of a promotion.] We used these nails to install our Bamboo flooring in our bedroom.
Date published: 2019-04-13
Rated 5 out of
5
by
Mike from
Good fastener
Shot about 3000 on our recent flooring install.
Fed well - no major jamb issues.
Installed clean in 99.9 of the cleats driven.
Cleat does break off clean w/ pliers if you get one that does not fully sink.
Date published: 2014-03-06
Helpful Links
Customer Services
About RONA
