Product selection from
AQUA-DYNAMIC
Brass Straight Anti-Freeze Valve
Article #0173103
Model #1390-100
Format 1/2x1/2x10"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Hassle-Free Returns
90 days to return or exchange in original condition and packaging.
Read Return Policy
Warranty
1-year limited
Description
Brass non-freeze wall hydrant, 1/2 in. male threaded x 1/2 in. soldered, natched flange for stable installation, built in.lockshield, 3/4 in. hose thread outlet, CSA certified.
- Brass construction
- Dual male and solder connections
Product specifications
Compatible Pipe Material
N/A
Warranty
1-year limited
Bury Depth(cm)
0.0
Bury Depth(ft)
0
Color/Finish Family
Chrome
Complies with Federal Lead Guidelines
Yes
Frost Resistant
Yes
Inlet Diameter
1/2-in
Inlet Size in Inches
1/2-in
Inlet Thread Type
Male
Length(cm)
25.4
Length(in)
10
Length(mm)
254.0
Material
Brass
Series Name
N/A
Le robinet fuit par le bouchon du haut Quoi faire?
Brass Straight Anti-Freeze Valve is rated
out of
5 by
5.
Rated 1 out of
5
by
cheaphead from
not as described or pictured
the photo shows a red dial and female connector from the dial.. the product has a black dial (handle) and male male connector.
Date published: 2021-05-29
Rated 1 out of
5
by
JT101 from
Mauvaise qualité
N’a pas duré plus de 24 heures... La valve s’est mis à fuir. N’achetez pas ce produit!
Date published: 2021-04-18
Rated 1 out of
5
by
Anonymous from
very bad desind
la tige est vide et l'eau s'accumule a l'intérieur.l'eau entre par les 2 bout et l'eau sort par la vis qui tien la poigné ca veut dire qu'avant l'hivert il faut enlever la vis et sifoner avec un vaccum.mon ancienne valfe avait un tige plaine.j'ai appliqué du silicone au 2 bout qui est juste pressé et non coule.soudé et en plus c'est lousse.l'eau s'accumule quand la hausse a jardin est connecté et que la valfe est ouverte.meme avec la vis qui tien la poigné
the rod is empty and the water accumulates inside. the water enters by the 2 ends and the water leaves by the screw which holds the handle it means that before the winter it is necessary to remove the screw and suck it with a vaccum. my old valve had a plain shank..but this one I applied silicone to the 2 end which is just squeezed and no
sinks.welded and in addition it is loose.water accumulates when the increase to the garden is connected and the valve is open.even with the screw that holds the handle the water still flows
Date published: 2020-09-13
Rated 3 out of
5
by
consommateurdici from
Intermediate quality
The key did not last more than 2 years in use. Probably a manufacturing defect, the exterior finish was not uniform throughout. The pipe cracked
Date published: 2020-06-18
Rated 3 out of
5
by
whocares from
Anti siphon valve stem insert
One of the seal rings in the valve anti- siphon valve stem insert failed and Rona does not stock service kits so if you have a problem you will be obliged to purchase a new valve to obtain repair parts or to change out the valve entirely.
Date published: 2020-05-31