Product selection from
PYLEX
Description
This 4'' (10.16 cm) x 50'' (127cm) Pylex adjustable anchor screw is the simplest and most efficient way to support a patio, tool shed or deck without needing to dig or pour concrete. Pylex anchor screw is strong and can support up to 5000 lb depending on soil composition. Adjust the head to facilitate installation or add an extension to insert it deeper.To be used with 3 1/2'' square posts. Its black powder coated finish and its steel structure combine style and durability for years to come. Pylex resists to ground movement due to freezing and melting temperatures.
- The simplest and most efficient way to support a patio, tool shed or deck without needing to dig or pour concrete
- Supports a load up to 5000lbs in sandy soil - 3500lbs in clay soil
- Height can be adjusted up to 3-in
- Offers long term protection since the wooden post is above ground level
- Adjust the head to facilitate installation or add an extension to insert it deeper
Product specifications
Warranty
5-year
Actual Length(cm)
8.89
Actual Length(in)
3.5
Actual Length(mm)
88.9
Actual Width(cm)
8.89
Actual Width(in)
3.5
Actual Width(mm)
88.9
Color/Finish Family
Black
Manufacturer Color/Finish
Black
Material
Metal
Package Quantity
1
Series Name
N/A
Type
Ground spike
You may also like
PYLEX
Adjustable Deck Support - 10'' - Steel - Pylex - Black
Format 10x3.5x4"
Details
Article #80645129
SIMPSON STRONG-TIE
Simpson Strong-Tie E-Z Post Base - 12 Gauge - Black Powder-Coated Finish - 3 13/16-in D x 6 13/16-in W
Article #35945285
PYLEX-L
Pylex-L Fence and Post Ground Anchor Support - 52 1/2-in H - Powder Coated Steel - Black
Format 55"
Details
Article #80645125
PYLEX
Pylex Rod for Anchor Cable - 36-in L x 5/8-in dia - Zinc-Plated - Steel
Article #8064020
PYLEX-L
Pylex Anchor Cable Kit and 36-in Rod - Yellow - Zinc - Steel - 800 lbs. Load Capacity
Format 50"
Details
Article #8064072
PYLEX
Pylex Ground Spike for Wood Fence - 4-in W x 4-in T x 32-in H - Black - Steel
Format 4x4x32"
Details
Article #12665001
Hi are these made from galvanized steel or what protects them from rotting in the ground over time
Hello Sir,
They are in steel and powder coated, last year we remove an screw piles from the ground after 9 years and the piles was like new, very sturdy. Our screw pile will last between 25-30 years depending of ground.
Anything else, please let us know.
Thanks
Date published: 2023-01-11
I am building a 12 by 37 addition on my house .single story can these be used for this application and well they pass building codes and inspection ....thanks
Hello Sir,
These screws pile are meant to support deck, even if a lot of customers used them for house addition, we don't have the enginerring document for this specific application.
Each ot them can support 5000 lbs in sandy soil and 3500 lbs in clay soil.
Anything else, please let us know.
Thanks
Date published: 2020-09-25
Can this used to support fence posts?
Hello Sir,
Our Adjustable Pylex 50” is not meant for fence posts.
If you wish to use an Screw piles for fencing, I would recommand to use the Pylex-L : https://pylex.com/en/products/10725-pylex-l-black
Anything else, please let us know.
Thanks
Date published: 2019-05-17
What is the difference between this adjustable ground spike and the adjustable screw model 10550? They look the same and the description is the same but the price is different.
Hello Sir,
Other then the color there's no difference, the item no.10550 will be replaced by the 10555 (black color ).
Anything else, please let us know.
Thanks
Date published: 2019-05-10
Is this considered to be engineered? If I was doing a deck that was 7x7 built off the house on ledger board how many of these would I need?
Hello Sir,
This screws piles are engineered across Canada, we do recommand to use one piles every 8 feet maximum span.
For your 7x7 deck you will need to use 2 at each eand of your deck as it is attach to your house.
Anything else, please let us know.
Thanks
Date published: 2019-04-10
will these hold up a deck with a hot tub on it. thanks
certainly not a chance I'ld want to take but check with your local building department or an engineer.
Date published: 2018-10-03
Hi, what are the required tools to install this product and how I can install it vertically 100%
You will need a sledge hammer or heavy hammer as well as a 8ft 2x4 for installation. A shorter piece of 2x4 will help to get it started. To keep it plumb use a piece of 1/2" rebar about 2 -3 ft long and drive that plumb where you want to install the Pylex screw. The screw is hollow and will fit over the rebar and follow it.
Date published: 2019-05-15
What is used to install this item?
Hello Sir,
To install the Adjustable Pylex 50", you have to used a 2x4 and simply turn around.
I would suggest to have a look to our installation video :
http://pylex.com/en/products/10555-adjustable-pylex-50-black
Anything else, please let me know.
Thanks
Date published: 2021-05-09
Adjustable Anchor Screw - 50'' - Pylex - Steel - Black is rated
out of
5 by
9.
Rated 5 out of
5
by
dcg58 from
Easy installation
I am putting an extension on my rear deck and only need to add one more post due to how it is layed out. Anyways I ordered one of the adjustable Pylex foundation screws and it was super easy to install. It is much easier than excavating and getting sonotube, concrete etc. It went into position in about 5 minutes tops. I am using a 6x6 post so I bought the 4x4 version (as you need this for installation) and then also bought a short 6x6 adjustable version for $15.00. Once installation was done I put the 6x6 top on and I good to go. Check YouTube for installation video if you want to see how quick they install.
Date published: 2018-05-28
Rated 4 out of
5
by
storz100mm from
Worked out better than expected
Happy I went with these foundation spikes over digging for concrete ones. Straight forward to install, after watching the online video. Make sure you use a rebar to help guide the spike into the ground as you screw it in. Rebar helps it to get through tough clay soil conditions here in Brampton. Did have to re-position two of the screw piles after screwing them in as they bottomed out on something or hit a rock. Not too big of a deal as you just un-scew it from the ground and try again nearby. With extra rebar. Overall happy I went with them, I think it was way easier than having someone dig the proper depth holes and then concrete and all that. Now to see how they make out with the deck on them.
You have to order these on Lowes.ca and have them shipped to your house, as they are not available any where nearby.
Installation does take a bit of a learning curve but after the first one the rest go pretty easy as long as they don't hit anything. Watch out for old concrete piers.
Date published: 2019-06-28
Rated 5 out of
5
by
Bareleigh from
Easy
15 minutes and it's done and ready to go. Beats the heck out digging and pour concrete.
Date published: 2017-05-02
Rated 4 out of
5
by
k22d from
dug in well
installed easily but it needs a adjustable post connection it only fits a 4x4
Date published: 2020-11-01
Rated 3 out of
5
by
Bido from
Does the job, but not the best
Not too bad to put in, seems sturdy. Very difficult to keep it level while putting in, even using a rebar as recommended. Not sure how I feel about it just sitting on itself without actually being secured in any way. Still finishing up the deck, so we’ll see how it works out.
These would work for a small shed or a small landing from a deck (as is my use). I would not consider using at all for a main larger deck. It only takes maximum of a 4x4 post.
Date published: 2021-08-20
Rated 3 out of
5
by
SM56 from
Pylex 50
Just installed 6 of these Pylex 50 as I am building a 14x16 deck. They went in fairly straight and easy. I do find that the top cap is fairly wobbly even though the base is firm. Is it supposed to be like this with the adjustable screw or even when the screw is off. I am worried that my deck will sway. I would recommend the product for ease of installation, but I am not sure about how well it will do for a deck application.
Date published: 2022-05-15
Rated 2 out of
5
by
Mike M from
Anchor screw 50 inch
I had to borrow a impact drill with 1200 lbs of York to screw these into the ground a regular car impact won't do. Hand screwing with a 4x4 won't do. I choose this cause I didn't want to do the sono tube and didn't want to do concrete thing. If you hit a stone forget it .if I had to do it over again I would do the sono tube and concrete.
Date published: 2021-05-05
Rated 3 out of
5
by
Bobsyour from
make sure all the caps are there before you leave
it's a lot harder to install than the video does not go through tree and bush roots
Date published: 2021-08-11
Helpful Links
Customer Services
About RONA
