
1/2" x 7/8" x 12" Push Fit Angle Valve
Article #01735419
Model #3225-120
Format 1/2x7/8x12"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Our expert center will contact you to schedule a delivery within 24-72 hours for appliance delivery. The delay for delivery is an estimate and may vary according to the availability of products, or due to other circumstances beyond our control. Delivery service is only available within a 50 km radius from the selected store (75 km for RONA+ stores). Additional charges may apply for installation. For appliances, accessories required for installation must be provided by the customer. We will not leave deliveries at an unattended site – note that additional delivery charges may apply for subsequent delivery attempts. See all details.
All express deliveries are delivered by our 3rd party partner ToolBX Inc. Only available for select in-store items in sufficient stock at the participating selected store. Delivery address must be within delivery zone of the selected participating store. Weight limit of 1,475 Kg (3,250 lbs) per order. Service must be requested before 2 p.m. on weekdays and before noon on Saturdays (local time) to get your order on the same day. After these times you'll get your order on the next available delivery day. Not available on national/provincial holidays. Service may not be available due notably high in-store traffic, bad weather conditions or any other situation affecting the availability of the service. See all details.
Our expert center will contact you to schedule a delivery within 24 hours. The delay for delivery is an estimate and may vary according to the availability of products, or due to other circumstances beyond our control. Delivery prices only include curbside delivery, except for appliances. Delivery service is only available within a 50 km radius from the selected store (75 km for RONA+ stores). Additional charges may apply for installation. We will not leave deliveries at an unattended site – note that additional delivery charges may apply for subsequent delivery attempts. See all details.
Description
The John L. Schultz "Aqua-Dynamic" stainless steel finish no lead brass 1/2" x 7/8" x 12" push fit angle valve for toilet piping features a flex connector port and is covered by a 1-Year limited warranty.
- Series 300 braided stainless steel
- Push-fit valve is for copper, PEX and CPVC tubing
Product specifications
Working Temperature Range
180 degrees F
Warranty
1-year limited
Complies with Federal Lead Guidelines
Yes
Finish
Stainless steel
Flexible
Yes
Inlet Diameter
1/2-in
Inlet Fitting End Type
Push
Inlet Fitting Size(cm)
1.27
Inlet Fitting Size(in)
0.5
Inlet Fitting Size(mm)
12.7
Inlet Size in Inches
1/2-in
Length(cm)
30.48
Length(in)
12
Length(mm)
304.8
Maximum PSI
125
Outlet Diameter
7/8-in
Outlet Fitting End Type
Ballcock thread
Outlet Fitting Size(cm)
2.2225
Outlet Fitting Size(in)
0.875
Outlet Fitting Size(mm)
22.225
Outlet Size in Inches
7/8-in
Package Quantity
1
Rigid
No
Size and Fitting Type
1/2-in FIP
Tube Diameter(cm)
1.33096
Tube Diameter(in)
0.524
Tube Diameter(mm)
13.3096
Tubing Material
Braided stainless steel
Use
Toilet