• icon-wishlist
  • icon-cart
Product selection from ONDURA

Corrugated panel

Article #05605003 Model #158 Format 48"x79"-25SF
eco
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

Painted corrugated asphalt roofing siding panels. Will not rust or corrode like metal. High wind resistance. Easy installation, low maintenance. Can re-roof up to layers. Limited lifetime warranty. Brown. 48 in. x 79 in.

Ecological Attributes

This product contains a minimum of 50% post-consumer recycled fibre, which significantly reduces the use of virgin fibre. The use of recycled materials allows for waste reclamation while limiting landfilling.

You may also like

Corrugated Roofing Panel - 36" x 79" - Black icon-wishlist
ONDURA
Corrugated Roofing Panel - 36" x 79" - Black
Format 36"x79"
Details
Article #05605040
Corrugated Roofing Panel - 36" x 79" - Brown icon-wishlist
ONDURA
Corrugated Roofing Panel - 36" x 79" - Brown
Format 36"x79"
Details
Article #05605039
Corrugated Roofing Panel - 36" x 79" - Red icon-wishlist
ONDURA
Corrugated Roofing Panel - 36" x 79" - Red
Format 36"x79"
Details
Article #05605041
3-in Galvanized Nails icon-wishlist
ONDURA
3-in Galvanized Nails
Format 3" 100BX
Details
Article #05605009
Vented Closure Strips 44" - 4-Pack icon-wishlist
ONDURA
Vented Closure Strips 44" - 4-Pack
Format 44" 4PK
Details
Article #05605006
3-in Galvanized Nails icon-wishlist
ONDURA
3-in Galvanized Nails
Format 3" 100BX
Details
Article #05605011
Ridge cap icon-wishlist
ONDURA
Ridge cap
Format 12 1/2"x79"
Details
Article #05605016
eco
Ridge cap icon-wishlist
ONDURA
Ridge cap
Format 12 1/2"x79"
Details
Article #05605000
eco
Ridge cap icon-wishlist
ONDURA
Ridge cap
Format 12 1/2"x79"
Details
Article #05605002
eco
Corrugated panel icon-wishlist
ONDURA
Corrugated panel
Format 48"x79"-25SF
Details
Article #05605005
Sheet Flashing 20" x 26" - Black icon-wishlist
ONDURA
Sheet Flashing 20" x 26" - Black
Format 20"x26"
Details
Article #05605007
Corrugated Panel icon-wishlist
ONDURA
Corrugated Panel
Format 48"x79"-25SF
Details
Article #05605015

Is this material fire resistant? What is the weight bearing capacity, if installed on a flat gazebo roof?

Asked by: DaveAndrew
Hello Marauder 697071, thank you for your interest in Ondura panels. Ondura panels cannot be installed to a flat roof. Ondura panels must be installed on a minimum pitch of 2" per every 12" and in areas that experience snow/ ice this pitch must be at least 3" for every 12". For project specific information or more details please contact our customer service department at 1-540-898-7000 opt.2 M-F 8a-5pm EST.
Answered by: Onduline Customer Service
Date published: 2019-07-23

Would you cut them for us

Asked by: Mike MC
I don't believe Lowes will cut them, but you can call the nearest store and ask. My husband transported them in our SUV (they're quite flexible) and then he used a hand saw to cut them to size as they were a bit larger than what we needed. They do leave an oily tar like film on the saw blade so you want to cut one panel, clean the saw and then repeat with the others you need to cut. If this product is way too large measurement wise, you can always purchase the package of roofing tiles (different brand name, but same product).
Answered by: MPeckahm
Date published: 2019-07-23

What are the ondura panels made of ?

Asked by: Bud 477
Hi Bud477, thank you for your interest in Ondura panels. Ondura panels and tiles are a composite asphalt material, asphalt and cellulose fibers are the composite mix. For project specific information or more details please contact our customer service department at 1-540-898-7000 M-F 8a-5pm EST.
Answered by: Onduline Customer Service
Date published: 2019-07-05

Can I use this under my deck for water runoff?

Asked by: Billyboy00
Hello Billyboy00, thank you for your interest in Ondura. Ondura panels cannot be used as an underdeck system due to the material and it's weight. Tuftex DeckDrain panels. another panel Onduline manufactuers, are perfect for this type of project and can be found at Lowe's. For project specific information or more details please contact our customer service department at 1-540-898-7000 M-F 8a-5pm EST.
Answered by: Onduline Customer Service
Date published: 2019-07-18

PVC panels require substantial UV treatment to avoid substantial sun damage/corrosion. Does UV (sun) rays play a role with this product ? if so, pls explain,..

Asked by: MWTWG
I have no sun damage on my panels they have been on building for three years ,they look like I just put them .
Answered by: jim haskins
Date published: 2019-07-06

I am building a shed under my deck. I don’t have room to screw from the top. Can I screw the panels from underneath? Thanks!

Asked by: Oilers22
Try this. Screw panels ( Ones you select) on strapping and slide onto roof supports and screw from the underside to strapping.You are not clear whether you built frame under deck. You can add extra cross pieces between roof joists to screw through. This will work if you are not screwing to deck joists.
Answered by: Keefer2
Date published: 2019-07-06

Is this the kind of roofing that the snow slides right off of wintertime?

Asked by: Kathleen Ann
Hi Kathleen Ann, Thank you for your interest in Ondura. As others have mentioned, when installed with the correct pitch of at least 3" per every 12" snow will slide it off the panels in winter time. For project specific information or more details please contact our customer service department at 1-540-898-7000 M-F 8a-5pm EST.
Answered by: Onduline Customer Service
Date published: 2019-07-24

Are the panels flexible? I am thinking about using them to create a roof on a pergola that has a slightly curved design

Asked by: strummergirl
Hello Strummergirl, thank you for your interest in Ondura. Ondura panels are slightly flexible but they are an asphalt product and have a minimal bend radius. Ondura panels can be cut to fit curved roofs such as a Quonset roof application. For project specific information or more details please contact our customer service department at 1-540-898-7000 M-F 8a-5pm EST.
Answered by: Onduline Customer Service
Date published: 2019-05-16
  • y_2020, m_7, d_11, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_42
  • loc_en_CA, sid_05605003, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Corrugated panel is rated 4.0 out of 5 by 69.
Rated 5 out of 5 by from Easy to Install We intalled these panels over our pergola on the weekend. We carefully measured 2x4x13' beams with the proper marks (48", the 44"...), ensured the center beam was where the overlapped sheets would be, and the sheets went up easily. My only advise is make sure to hit the beams (we didn't use a chalk line but should have), make sure the beams are square (ours were), and don't forget NOT to nail where the overlaps will be (happened a couple of times), because removing the ringed nails is extremely difficult once they're in the wood. I love my new roof and can sit outside in the rain now!
Date published: 2011-06-09
Rated 4 out of 5 by from Good For Some Applications I bought two of these pannels to top off a little lean-to type thing we constructed to house yard equipment we did not want to store indoors. It is thick, yet easy to cut and or drill screws through. It does loose its shape if it is not laid flat during storage (before use). We had to wait a day for this to correct itself...not a problem, just a note as I had stored it standing up for days prior to installation. It was not as ridgid as I had thought it would be (ordered online), but a few support beams and it works well. I really like that is looks so much nicer than the metal counterparts, and that it is easy to work with. It is also very economical, and that is always good! I am considering using this product again to make another roost roof for my hens.
Date published: 2011-11-08
Rated 3 out of 5 by from CAREFUL WITH THE INSTALLATION The reason I gave it 3 stars is because it is fragile while being nailed into place with the specified nails. I watched the installation video and I saw a truck run over it without damage. Whoa, I thought, that's what I need. But......IF YOU STEP ON IT ESPECIALLY THE RIDGE WITH WALKING SHOES, ( I was wearing Rockport Walking shoes ), YOU WILL SQUISH THE RIDGES. I WAS TAKEN ABACK WHEN I SAW THAT. I went and got a large pillow and knee pads and crawled over the Ondura sheets as I nailed them down. That worked. But how come the truck did not damage them.? Also, if you do misfire on a nail, it does usually gouge a hole or tear in the ridge which then you must repair. On a positive note, it's fairly light and It doesn't cut your hands when you handle it.
Date published: 2016-10-20
Rated 5 out of 5 by from I bought some of these many years ago to use as tops over my tree stands, I wanted something that was quiet and not too heavy., They have held up very well. I have had large limbs fall on them and the angle iron frame was bent before they tore, I simply patched the crack and reinstalled, I have dropped the tops from 20 ft and they survived the fall. I like the color , it works well in the outdoors, I may use it on my Duck blinds in the future. I wish I could buy some with out the ribs,
Date published: 2010-12-18
Rated 1 out of 5 by from Save your money buy regular shingles or metal I just bought the Ondura sheets to cover the roof for my new shed at the recommendation of a Lowes employee. They said it was very durable and easy to install. Spent $363.99 on the material alone on 3-12-17. Installation was very easy. Tuesday the following week we had a small hail storm. Size hail was maybe half inch. Now I have over 20 holes in the Ondura sheets. Not very durable. Now I get to replace my entire roof again, IN LESS THAN A WEEK. I'm going back to shingles or metal roofing.
Date published: 2017-03-22
Rated 5 out of 5 by from Outstanding Product I reviewed many products and chose this product over conventional shingles. They install faster, less weight to move, they cut easy. I installed it over my exsisting conventional shingle roof. When friends come by they comment that it looks and appears to be metal, but its not. It has gone thru hail, endured -10 to 110 degrees, and high winds. I dont have any thing bad to say except why dont they use this product more on homes... Regards Bob
Date published: 2011-04-28
Rated 4 out of 5 by from This is great stuff for certain jobs. Pros: For what it does it is quite good. The only other thing you need to put over the rafters are some 2x4's at right angles from the rafters. No plywood or osb sheeting. vNo felt paper or shingle material. This stuff is thicker than shingle and so it is tougher than shingles in some ways. For instance the corigated surface provides regidity while also sealing the overlaping joint with adjacent sheets. It has no little pebles lik regular sheeting so its smoothness makes it easier to clean off leaves and twigs with a blower or broom. Cons: It's resistence to puncture is poor. If a mounting nail hits a knot or another nail in the 2x4 the mounting nail can easily twist or bend and make a small hole that needs to be sealed via a roofing sealant. If you need to get on it after or during instalation have at least two small 4" x 4' or bigger to kneel on. otherwise the corigated material will probably crush and fracture.
Date published: 2013-06-17
Rated 5 out of 5 by from Great Product!!! I used this product to cover my back padio. I supported under it with 2x2 foot holes and it workes great. I have had it for over a year and no leaks what so ever. the product was easy to put up and looks good as new. Would recomend this to anyone adding an exterior structure to there home.
Date published: 2011-01-14
  • y_2020, m_7, d_11, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_69
  • loc_en_CA, sid_05605003, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT