• icon-wishlist
  • icon-cart

Multi-Zone Programmable Connex ControllerTM

Article #19145052 Model #CX-MPC
eco
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

Multi-Zone Programmable Connex ControllerTM

icon-wishlist

Description

Dimplex "Multi-Zone ConneTM" Controller provides whole home control with maximum comfort and efficiency. Compatible with all linear proportional convection baseboards and precision comfort heaters. 4 heat zones maximizing comfort and savings. Quick set programming: 7 days and 4 event scheduling. Backlit touch screen, largeand easy to read display. Easy to install, no holes to cut or wiring to run.

Ecological Attributes

This programmable thermostat is less sensitive to temperature differences for improved comfort and up to 10% in energy savings. It also provides better energy control of energy consumption.

Product specifications

Type
Programmable
Model
Multi-Zone
Component
Molded Polymer
Color
White
Height
3.375" (8.55 cm)
Width
5.5" (13.8 cm)
Voltage
3 V (2 x 1.5 V AA batteries included)
Temperature Setting
Touch Screen
Warranty
1-Year Limited
Programmable
Yes

You may also like

eco
7-Day Programmable Thermostat - 24 V - White icon-wishlist
HONEYWELL
7-Day Programmable Thermostat - 24 V - White
Format 24V
Details
Article #0522063
Thermocouple - 18" icon-wishlist
HONEYWELL
Thermocouple - 18"
Format 18"
Details
Article #0522064
Thermocouple - 24" icon-wishlist
HONEYWELL
Thermocouple - 24"
Format 24"
Details
Article #0522065
Stelpro Integrated Electronic Single-Pole Thermostat - White icon-wishlist
STELPRO
Stelpro Integrated Electronic Single-Pole Thermostat - White
Format 120-240V
Details
Article #03915299
Thermocouple - 30" icon-wishlist
HONEYWELL
Thermocouple - 30"
Format 30"
Details
Article #0522066
Manual Heat/Cool Thermostat - 24 V - White icon-wishlist
HONEYWELL
Manual Heat/Cool Thermostat - 24 V - White
Format 24V
Details
Article #05225054
Replacement Thermocouple - Gas - 36" icon-wishlist
HONEYWELL
Replacement Thermocouple - Gas - 36"
Format 36"
Details
Article #0522067
eco
Pack of 2 Programmable Thermostats icon-wishlist
AUBE
Pack of 2 Programmable Thermostats
Format 2/PK 240V 3500W
Details
Article #05225058
eco
Non-Programmable Electric Thermostat - 300 to 3000 W - White icon-wishlist
STELPRO
Non-Programmable Electric Thermostat - 300 to 3000 W - White
Format 300-3000Wx240Vx1PK
Details
Article #03915131
eco
"Focus" Electronic Thermostat icon-wishlist
HONEYWELL
"Focus" Electronic Thermostat
Format 24Vx
Details
Article #0522070
Electronic Thermometer icon-wishlist
AUBE
Electronic Thermometer
 
Details
Article #5954018
Stelpro Built-in Thermostat Kit - 120-600 V- Plastic - White icon-wishlist
STELPRO
Stelpro Built-in Thermostat Kit - 120-600 V- Plastic - White
Format 120-600V
Details
Article #03915309
Baseboard Thermostat icon-wishlist
STELPRO
Baseboard Thermostat
Format 300A2500Wx1P
Details
Article #03915133
750-mV THERMOSTAT icon-wishlist
HONEYWELL
750-mV THERMOSTAT
 
Details
Article #0522071
eco
Smart Thermostat - Wi-Fi - Black icon-wishlist
ECOBEE
Smart Thermostat - Wi-Fi - Black
 
Details
Article #41535203
eco
Electronic Programmable Thermostat - 24 V - White icon-wishlist
HONEYWELL
Electronic Programmable Thermostat - 24 V - White
Format 24V
Details
Article #05225061

My house is heated by 5 baseboard heaters, 3 of them are dimplex heaters with wireless controls on the heater itself 2 of them are controlled by the thermostats that existed in the house and have no heater mounted controls. What would I need to use Connex

Asked by: Jgreaves
You would need to replace the two non-Connex heaters with ones that do support Connex
Answered by: ConnexUser
Date published: 2018-11-17

Can this unit turn the heaters off completely or does it have a minimum team. setting?

Asked by: Swif
Swif, Thanks for the question. So this is technically a remote control to use with CONNEX enabled heaters. CONNEX heaters only have a single pole thermostat. There is no definite off. Thank you
Answered by: DimplexCustomerService
Date published: 2018-11-08

Equipped with CONNEX wireless technology that synchronizes with Dimplex LPC and PCH heaters for simple whole home control? Do I need a computer or wifi for the wireless technology? How do they talk to each other?

Asked by: 9Wanttoknowanswer
Hi, Thanks for your interest in our CONNEX controller. This controller does not require a computer or Wi-Fi to use. The CONNEX controllers communicate with each other via radio frequency.
Answered by: DimplexCustomerService
Date published: 2018-11-01

how many heaters can be controlled in each of the 4 zones,

Asked by: coldlakemike
Good Morning, You can have as many heaters on one zone, as long as the last heater is with in 50 feet of the previous. Thank you
Answered by: DimplexCustomerService
Date published: 2017-12-05

The sync "seems" to go well, when syncing the heaters while a time period is active they snap on. When it comes to switching to a new event the controller displays the new temperature correctly but the heaters do not update to the new temperature.

Asked by: Diggerskip
  • y_2019, m_12, d_9, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_CA, sid_19145052, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Multi-Zone Programmable Connex ControllerTM is rated 3.0 out of 5 by 8.
Rated 4 out of 5 by from Works fine, pain to setup First of all, this controller works great after you set it. It saves me at least a dollar a day and there were just a couple of times in a few month when some interference prevented one of the heatersnot to switch to the desired temperature at the preset time. However the manual is just badly written and some features are not intuitively understandable. I can understand that time must be set with a 1-min interval and this may take some time, especially when your local time is 12 hours ahead of the default one. Anyway, I will see it again when I need to change the battery once a year. But setting time for out-of-home or night mode with the same interval, seriously? Do you know anyone who needs to turn his heaters on exactly at 17:27? A 15 or 10-minute interval would be fine, even 5. Also the most complicated moment is the initial sync with the heaters. When you do it, nothing tells you what is going on until heater's display shows the new setting. This is the reason why many people are having difficulties with that. Hopefully the new Wi-Fi enabled controllers will make it easier.
Date published: 2019-07-11
Rated 1 out of 5 by from CX-MPC very difficult to configure.Cannnot synch easily with the IPHONE.If you miss the first step programmation , you're done.
Date published: 2018-12-24
Rated 1 out of 5 by from Horrible product. Even worse customer support Regret wasting money on the heaters and the thermostat. Very hard to set up. Very hard to configure. Even harder to sync to phone. No help available online. Phone reps are even worse. Save your money. Save your time. Buy another brand. Will be removing everything dimplex and replace with different manufacturer.
Date published: 2019-02-08
Rated 4 out of 5 by from Set it up and then forget it We've used this to control 2 baseboard heaters in our house. The setup took a little while but once it was done, we haven't had to do anything else with it and it works fine. I like being able to set a different program for each heater with the same control.
Date published: 2019-05-19
Rated 4 out of 5 by from works as expected I put three heaters in my wife's studio and wanted the wifi thermostat but the reviews were so bad I got this one. The instructions take a little studying and patience is required but it works as expected. Have all three heaters on the same zone.
Date published: 2019-10-17
Rated 5 out of 5 by from Working Great No issues at all. I found it easy to setup by following the manual. I enjoy controlling four zones on one device.
Date published: 2019-10-26
Rated 3 out of 5 by from Syncing advise desperately needed! Hello, while upgrading my basement suite I have decided to replace my 70's baseboard heaters with a product that is much more energy efficient. The problem that I seem to be having is that all of the zones are programmed in, the sync "seems" to go well, when syncing the heaters while a time period is active they snap on and go to the programmed temperature. When it comes to switching to a new event the controller displays the new temperature correctly but the heaters do not update to the new temperature, but if you re sync the heaters again they will adjust to the new temperature and finish out the event until it is time to switch to a new event at which time another sync is required. I am obviously missing something with the initial setup and would be very grateful if someone could offer some advice on how get this updating on their own. Thanks in advance!
Date published: 2019-09-29
Rated 2 out of 5 by from Touch screen buttons are hard to push, does not work that great, very low tech. Hard to program and battery drains fast. But all in all does change multi zone tempature wirelessly.
Date published: 2019-03-06
  • y_2019, m_12, d_9, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_CA, sid_19145052, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT