• icon-wishlist
  • icon-cart
Product selection from DEWALT

Mitre Saw Stand - Up to 8' - Black and Yellow

Article #00275591 Model #DWX726
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.


Adjustable infeed and outfeed roller work support provides up to 8' of material support. Easily adjustable mounting rails adapt to nearly any miter saw and portable thickness planer. Wide rubber grip wheels provide easy jobsite mobility. Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up. Durable tubular steel construction allows for a 300 lb maximum weigth capacity. Compact vertical storage option maximizes workplace efficiency and easy of transport. Straight forward one-time assembly minimizes down time.

Product specifications

Black and yellow
17" to 32.5" (43.18 to 82.55 cm)
59.5" to 98" (151.13 to 248.92 cm)
For mitre saw
67 lb (30.4 kg)

You may also like

Miter Saw Stand - Metal - Yellow icon-wishlist
Miter Saw Stand - Metal - Yellow
Article #00276383
Universal Stand for Mitre Saw icon-wishlist
Universal Stand for Mitre Saw
Format 65x22.8x35.8"
Article #22745004
Table Saw Stand - Folding and Portable icon-wishlist
Table Saw Stand - Folding and Portable
Article #00276275
Mitre Saw Stand icon-wishlist
Mitre Saw Stand
Article #00275686
Steel Roller Stand - 42.6" - Black icon-wishlist
Steel Roller Stand - 42.6" - Black
Format 26.7-42.6"
Article #22745005
Gravity-Rise Miter Saw Stand - Grey icon-wishlist
Gravity-Rise Miter Saw Stand - Grey
Article #1983257
Mitre Saw Stand Makita - Metal - Installation Tool-Less icon-wishlist
Mitre Saw Stand Makita - Metal - Installation Tool-Less
Article #11975463
Kobalt steel adjustable rolling miter saw stand icon-wishlist
Kobalt steel adjustable rolling miter saw stand
Article #97925011
Mitre Saw Stand - 12" Saw Max - 8' - 400 lb Capacity icon-wishlist
Mitre Saw Stand - 12" Saw Max - 8' - 400 lb Capacity
Article #37815176

Does the stand come with rollers and length stop?

Asked by: Miter saw
The description, and pictures show the rollers. Not sure about length stop.. That is easy enough to make with a clamp and piece of wood.
Answered by: Steve from Edmonton
Date published: 2019-04-28

Is it ok to leave a miter saw "permanently" attached to this and store it in the upright position for a long time? Trying to save floor space....

Asked by: tpic
you certainly can - and save storage space.
Answered by: Doaft
Date published: 2017-09-27

Same question as 'tpic'. Can I leave the mitre saw attached for indefinite period of time?

Asked by: Denise01072019

Will it fit a sliding miter saw with 17" X 17" base holes?

Asked by: BJR56
  • y_2020, m_11, d_29, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_CA, sid_00275591, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
Mitre Saw Stand - Up to 8' - Black and Yellow is rated 3.6 out of 5 by 120.
Rated 5 out of 5 by from Great stand only needs a tool tray Recently purchased this to mount my Delta 12" sliding miter saw. Love the hydraulic asset, makes a big difference with a heavy saw like the Delta. Only a couple of things I would like to see - a tool tray to keep small tools readily available, and some sort of pad on the foot rest, so when the saw is stored upright it doesn't get scratched, or scratch the floor. I put a piece of styrofoam around it with some tape for now, serves the purpose but not very elegant. Also, no way to get to one of the rail mounting bolts to tighten down one the saw is mounted, but I don't think that will be a big issue.
Date published: 2014-04-10
Rated 5 out of 5 by from Great Stand I bought a Dewalt 12" compound miter saw recently. I did not relish the idea of lugging my saw around and using it on a makeshift table so I needed a stand that could be folded up small and moved around easily.This was my Christmas gift from my family. (Nice List!!!!) I just recently had the chance to use this on a small project and I was very pleased. I easily moved my saw around the shop, when I was finished, it collapsed nicely and stowed easily. I like the way that it can stand up right without danger of falling over. It was well worth the money and I am looking forward to getting a lot of use out of it,
Date published: 2015-01-16
Rated 5 out of 5 by from Releasing the locking mechanism. As noted in other reviews and based on personal experience with stand you "must" lift up on the handle next to the release mechanism to lower the saw (heavier the saw the more you need to lift, same to lock it up right). The stand will now lower but assist the lowering of the stand. Heavy saws will drop rather quickly & by all means keep fingers out of pinch points. Lubricate the rotating joints occasionally with silicone lubricant but not the stand's cylinder. Use a rag sprayed with silicone to "clean" off the cylinder but try not to get the cylinder seal soaked in lubricant. Had mine for years. Nice not to have to remove saw plus it stands upright in corner of garage out of the way till needed. [This review was collected as part of a promotion.]
Date published: 2019-07-26
Rated 3 out of 5 by from Hs some issues I bought this thinking that moving my miter saw would be much easier. I was right, to a point. Like others have said, there's a problem with folding and unfolding. This is an issue I don't have the back strength to screw with it every time I want to move it. Plus that handle that's screwed up. Dewalt people haven't worked with this or it would have been made better. I'd pay another $20-$30 for something that's worth it. Dewalt needs to start thinking about the customer a little more and not about how they can make a cheap product and charge more for it.
Date published: 2018-05-10
Rated 2 out of 5 by from Alright but expecting better This stand wasn’t too hard to assemble and use but the adjustable arms are a heck of a time to use I literally have to use a hammer to get them out and then they flex when you’re using heavier materials (which is expected) but I just had to sand down the one arm that goes into the other and grease it up and it still doesn’t work perfectly but I can use it with my hands, and when I was sliding the arms in and out a big metal shaving came out of the one arm... I would’ve expected dewalt to come up with a better design, if you can handle carrying the stationary stands I would get one of those I love that stand but the rolling stand no thanks.. also I had to mess with the mechanism that lowers it up and down after 6 months of owning this
Date published: 2019-11-22
Rated 1 out of 5 by from new design - not good They changed the design on the supports. They are no longer rollers - now they are static pieces of tubing. Also different height adjustment system. I bought one of these last year and love it. The one I just recently bought with the new (read-cheaper) design is getting returned. Very disappointing. Note to Lowes - you should update your image. It is not longer accurate on this item.
Date published: 2016-08-05
Rated 4 out of 5 by from Mitre saw stand problem fixed I like this stand. Its constructed very well, but I to had problems with it collapsing. (See photos below) So the first thing I did was to loosen the screw in the middle. Didn't work. Then I loosened the nuts on both sides of the screw. Didn't work but I left both the screw and the nuts loosened. Next, I readjusted the cable adjuster that holds the tension cable as shown below. This was a little difficult to do because of the spring, but I got it adjusted. It seems to me that the cable is kind of long and needs have more tension. I also added a cable tie to the rail above past the cross bar above this mechanism to help put more tension on the cable. Even though I did all this while in fully extended position, I was still very cautious about it collapsing but it did not. After I did all this I grabbed the handle, pull up, pushed the release lever, and pushed down slowly and it collapsed. In summary: loosen the screw and two nuts, and readjust cable adjuster. Hope this helps.
Date published: 2019-01-28
Rated 5 out of 5 by from HEAVY Duty We are stripping the basement down to refinish. I decided that a stand is needed for my Craftsman 10" Compound Sliding Miter Saw. This was my choice. I am not disappointed. I was slightly surprised when the shipping weight was noted at 72lbs!!! Assembly was not hard, it only took me about 45 min (I was in no hurry either). It was simple to attach my saw, the unit as a whole is very solid. I love the cord wrap feature! Tips: When mounting your saw, keep the rail screws just loose enough to move them with a little effort. Once you have everything squared and where you want it, tighten the 4 corners of the rails, if needed remove the saw to tighten the 2 middle screws (I had enough clearance under mine this was not needed). I look forward to putting this to good use, and would highly recommend it. Great quality for the price!
Date published: 2015-05-01
  • y_2020, m_11, d_29, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_120
  • loc_en_CA, sid_00275591, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms