• icon-wishlist
  • icon-cart
Product selection from IRWIN

Marples Forstner Wood Drill Bit - 3/4"

Article #02445405 Model #1966898 Format 3/4"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

Marples Forstner Wood Drill Bit - 3/4"

icon-wishlist

Description

Drill flat-bottom holes and pocket holes quickly, easily and precisely with this Irwin Marples forstner drill bit. It features ultra-sharp teeth that drill clean holes with a fine, smooth finish. The teeth angles maximize speed of cut and power through soft and hard wood efficiently. The forstner drill bit is made of steel for strength and durability, and it has a reduced shank that fits drills and drill presses 3/8 inch and larger.

Product specifications

Component
Steel
Type
Forstner wood drill bit
Model
Marples
Utilization
Create flat bottomed holes or pockets holes
Diameter
3/4" (1.9 cm)
Shafts
Reduced shank fits 3/8" (0.95 cm) and larger drills and drill presses
Packaging
Each

You may also like

Titanium Drill Bit Set - Impact Ready - 5 Pieces icon-wishlist
DEWALT
Titanium Drill Bit Set - Impact Ready - 5 Pieces
Format ST5
Details
Article #00275992
Dewalt SDS Plus Masonry Drill Bit - 5/32" x 4 1/2" icon-wishlist
DEWALT
Dewalt SDS Plus Masonry Drill Bit - 5/32" x 4 1/2"
Format 5/32x4 1/2x6 1/2
Details
Article #00275071
Titanium Drill Bit Set - Impact Ready - 10 Pieces icon-wishlist
DEWALT
Titanium Drill Bit Set - Impact Ready - 10 Pieces
Format ST10
Details
Article #00275993
Insert Bit for Impact Driver icon-wishlist
DEWALT
Insert Bit for Impact Driver
Format #3x1"
Details
Article #00275421
Insert Bit for Impact Driver icon-wishlist
DEWALT
Insert Bit for Impact Driver
Format #2x1"
Details
Article #00275422
DRILL BIT icon-wishlist
HAUSSMANN
DRILL BIT
Format 11/32"x135DG
Details
Article #81205117
Drill Bit - For Concrete - Tapcon - Carbide - 5/32" x 5 1/2" icon-wishlist
DYR
Drill Bit - For Concrete - Tapcon - Carbide - 5/32" x 5 1/2"
Format 5/32x5 1/2"
Details
Article #5858126
CONCRETE DRILL BIT icon-wishlist
BOSCH
CONCRETE DRILL BIT
Format 1x8"
Details
Article #1983035
Titanium Drill Bit - Impact Ready - 13/64" icon-wishlist
DEWALT
Titanium Drill Bit - Impact Ready - 13/64"
Format 13/64"
Details
Article #00275982
Insert Bit icon-wishlist
DEWALT
Insert Bit
Format #2x2"
Details
Article #00275423
DRILL BIT SET icon-wishlist
HAUSSMANN
DRILL BIT SET
Format ST21
Details
Article #81205127
CONCRETE DRILL BIT icon-wishlist
BOSCH
CONCRETE DRILL BIT
Format 1/2x10"
Details
Article #1983036
Square Insert Bit icon-wishlist
BOSCH
Square Insert Bit
Format #2x1"xPK25
Details
Article #19835362
Screwdriving and Drilling Bits Kit - 45 Pieces icon-wishlist
BLACK & DECKER
Screwdriving and Drilling Bits Kit - 45 Pieces
Format 45PC
Details
Article #00275996
eco
Concrete Drill Bit - 5/32'' icon-wishlist
EXCHANGE-A-BLADE
Concrete Drill Bit - 5/32''
Format 5/32"
Details
Article #34595915
Titanium Drill Bit - Impact Ready - 7/32" icon-wishlist
DEWALT
Titanium Drill Bit - Impact Ready - 7/32"
Format 7/32"
Details
Article #00275983
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Marples Forstner Wood Drill Bit - 3/4" is rated 4.6 out of 5 by 19.
Rated 5 out of 5 by from Perfect Holes I am building a home theater and need to run wiring through a lot of studs. Tried the Irwin Speedbor bits, but it look a lot of forward and reverse back and forth action on my drill to get through 2x6 studs. This Forster bit goes right through without stopping. It doesn't get stuck like the Speedbor or standard Irwin auger bits do. You still need to apply pressure to push the bit through... but much easier in my opinion. Highly recommended. My only complaint is that the shank is round, and not hex... so you can get slippage. When the hole is complete I run a Speedbor but through it just to get it smooth and perfectly straight... FYI for the perfectionists out there.
Date published: 2017-11-12
Rated 5 out of 5 by from Should have purchased this from the beginning We went through 4 paddle bits wearing out on us before we got even half way through our project before I bought this one. It works way better than a paddle bit and lasts a lot longer! Well worth the price I paid! Just wish I'd started the project with this bit instead. Would have saved me money in the in the long run. [This review was collected as part of a promotion.]
Date published: 2019-07-13
Rated 4 out of 5 by from Needs improvement It would be nice if this bit had a stepped shank instead of one size. It would also be nice if the center point was just a bit longer, maybe 1/3rd longer. The price was fair and the bit is pretty solid. It could just use a couple tweaks to make it 5*. [This review was collected as part of a promotion.]
Date published: 2018-10-05
Rated 4 out of 5 by from Servicable Bit I has to sort through several packaged bits hanging on the rack to find a bit that did not have one or more minor imperfection(s), mostly on the cutting spur. Look carefully... Otherwise, the bit I finally selected performed well. [This review was collected as part of a promotion.]
Date published: 2019-07-24
Rated 4 out of 5 by from 3/4 in Forstner bit did the job I have the occasion to use Forstner bits on a regular basis, but needed a 3/4 inch. My usual source was out of that size so I found this as a second choice. I will be back for others. The cut was clean as could be. [This review was collected as part of a promotion.]
Date published: 2019-01-26
Rated 4 out of 5 by from Good bit so far It’s really hard to give viable review after only one use but that being said, this bit cuts very clean with no chipping I used it in pine and was very please with it for the price. [This review was collected as part of a promotion.]
Date published: 2018-10-20
Rated 5 out of 5 by from A work horse This item is using the latest design (technology?) for a perfect bore hole. No splinting on either side of your wood project. Highly recommended. [This review was collected as part of a promotion.]
Date published: 2019-08-14
Rated 5 out of 5 by from Great Bit - Even on Oak Worked well for holes on 3/4 inch oak. Pretty dull afterwards, but cut cleanly without chipping. Great non-carbide bit for a decent price. [This review was collected as part of a promotion.]
Date published: 2018-11-11
  • y_2019, m_12, d_13, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_CA, sid_02445405, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT