• icon-wishlist
  • icon-cart
Product selection from INSTA-PLUMB

"J" Bend - 1 1/2" - White

Article #12365868 Model #10400QLK Format 1 1/2"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

This "J" bend is great for hard to reach or confined areas under the sink. It is intended for use with drainage. This product features a fast and easy installation; no need to use conventional slip nuts or washers. The tube comes with an easy to use installation tool. Not for use with brass tubing.

Product specifications

Component
Polypropylene
Interior/Exterior
Indoor
Included
Installation tool
Color
White
Size
1 1/2" (3.8 cm)
Type
"J" Bend
Quantity per Pack
1

You may also like

Lavatory Basin Outlet icon-wishlist
LUXO MARBRE
Lavatory Basin Outlet
Format 10x2 3/4"
Details
Article #6559087
"F2" Freestanding Bathtub Drain - ABS - Black icon-wishlist
MAAX
"F2" Freestanding Bathtub Drain - ABS - Black
 
Details
Article #06385324
Drain with overflow icon-wishlist
LUXO MARBRE
Drain with overflow
 
Details
Article #65595189
Drain with overflow icon-wishlist
LUXO MARBRE
Drain with overflow
 
Details
Article #65595188
Lavatory Basin Outlet icon-wishlist
LUXO MARBRE
Lavatory Basin Outlet
Format 12x7x3"
Details
Article #6559095
Lavatory Basin Connector icon-wishlist
LUXO MARBRE
Lavatory Basin Connector
Format 3x1/2"
Details
Article #6559086
Lavatory Basin Outlet icon-wishlist
LUXO MARBRE
Lavatory Basin Outlet
Format 16x7x3"
Details
Article #6559085
Round Button Sink Drain - 1 1/4" - Chrome icon-wishlist
PLUMB PAK
Round Button Sink Drain - 1 1/4" - Chrome
 
Low Price
Details
Article #12365577
Washer - Polyethylene - 1 1/2" - White icon-wishlist
PLUMB PAK
Washer - Polyethylene - 1 1/2" - White
Format 1 1/2"
Details
Article #12365411
Kitchen Sink Strainer - 4 1/2" - Stainless Steel icon-wishlist
MASTER PLUMBER
Kitchen Sink Strainer - 4 1/2" - Stainless Steel
 
Low Price
Details
Article #67845897
Bath spout icon-wishlist
PLUMB PAK
Bath spout
Format 1/2"
Details
Article #12365319
Slip Joint Nut with Washer - Brass - 1 1/2'' icon-wishlist
PLUMB PAK
Slip Joint Nut with Washer - Brass - 1 1/2''
Format 1 1/2"
Details
Article #12365374
Bath Overflow Cartridge for "Footlok" Bath - Plastic - Chrome icon-wishlist
PLUMB PAK
Bath Overflow Cartridge for "Footlok" Bath - Plastic - Chrome
 
Details
Article #1236729
Kitchen Sink Strainer - 3 1/2" - Stainless Steel icon-wishlist
PLUMB PAK
Kitchen Sink Strainer - 3 1/2" - Stainless Steel
Format 3 1/2"
Details
Article #12365474
Split Joint Nut - ABS - 1 1/2" - Black icon-wishlist
PLUMB PAK
Split Joint Nut - ABS - 1 1/2" - Black
Format 1 1/2"
Details
Article #12365485
P.O. Plug with Vent - Mechanical - 1 1/4" X 8" - Plastic - Chrome icon-wishlist
PLUMB PAK
P.O. Plug with Vent - Mechanical - 1 1/4" X 8" - Plastic - Chrome
Format 1 1/4x8"
Details
Article #12365369
1 1/2-in Bath Overflow icon-wishlist
BELANGER UPT
1 1/2-in Bath Overflow
Format 1 1/2"
Low Price
Details
Article #1236406
Bevelled Slip-Joint Washer - Polyethylene - 1 1/2'' - 2/Pack icon-wishlist
PLUMB PAK
Bevelled Slip-Joint Washer - Polyethylene - 1 1/2'' - 2/Pack
Format 1 1/2" 2PK
Details
Article #12365386
Lavatory P.O. Plug - Mechanical - 1 1/4" X 8" - Brass - Chrome icon-wishlist
PLUMB PAK
Lavatory P.O. Plug - Mechanical - 1 1/4" X 8" - Brass - Chrome
Format 1 1/4x8"
Details
Article #12365370
Bath Overflow Washer - "Footlok" - Rubber - Black icon-wishlist
PLUMB PAK
Bath Overflow Washer - "Footlok" - Rubber - Black
 
Details
Article #1236728
Drain Plug with Vent - 3-piece - 1 1/4" X 6" - Brass, Chrome icon-wishlist
PLUMB PAK
Drain Plug with Vent - 3-piece - 1 1/4" X 6" - Brass, Chrome
Format 1 1/4x6"
Details
Article #12365345
Lavatory P.O. Plug - 1 1/4" X 5" - Round - Brass - Chrome icon-wishlist
PLUMB PAK
Lavatory P.O. Plug - 1 1/4" X 5" - Round - Brass - Chrome
Format 1 1/4x5"
Details
Article #12365501
Strainer kit icon-wishlist
MASTER PLUMBER
Strainer kit
 
Details
Article #67845678
Universal strainer icon-wishlist
MASTER PLUMBER
Universal strainer
 
Details
Article #67845682
Drain Plug with Vent - One-Piece - 1 1/4" X 5" - Brass, Chrome icon-wishlist
PLUMB PAK
Drain Plug with Vent - One-Piece - 1 1/4" X 5" - Brass, Chrome
Format 1 1/4x5"
Details
Article #12365344
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
"J" Bend - 1 1/2" - White is rated 4.8 out of 5 by 27.
Rated 5 out of 5 by from Plumbing just got easier I have a bathtub that has a drain that is almost impossible to reach and it needs replacing. I was really putting it off because I would have to tear out part of the ceiling in the basement to get to it. This J bend changed that. I was able to, by feel, take out the old extension and simply push the new one into place. I played with it for a while and it is very easy to use. Just push it in and it is connected. It is also made of a thick plastic that should last longer than I will. I will use this again if I need to change sinks or tub drains. [This review was collected as part of a promotion.]
Date published: 2018-12-07
Rated 4 out of 5 by from installs without tools the j-bend is designed to be installed without tools. The upper joint is a push and click joint. The part also comes with a plastic tool to release the joint when/if the need arises. The instructions are well written and easy to understand. The part works well as designed and is easy to install IF the directions are followed. It is designed for drains ONLY as it is not rated for water pressure. As it has been recently installed long term quality is unknown. [This review was collected as part of a promotion.]
Date published: 2018-12-09
Rated 5 out of 5 by from Quality Product I’ve used plastic drain fittings before, and wasn’t really a fan, but the fittings from Keeney are a much higher quality. The plastic is a thicker gauge making them more solid. I also liked the easy install feature. A big plus is the removal tool is included so if you make a mistake in your alignment and need to remove, there is no need to return to the store and buy the tool. I used both the J bend and a 12” extension tube and had no issues with either. [This review was collected as part of a promotion.]
Date published: 2018-12-07
Rated 5 out of 5 by from Solid, easy install Normally I just use the cheap oatey sink traps but I might use this in the future, its really solid and seems more fool proof. And it disconnects easily. [This review was collected as part of a promotion.]
Date published: 2018-12-04
Rated 5 out of 5 by from Plumbing made simple Plumbing made simple Press fit a watertight connection without glues and primers. Do a quick plumbing trap repair, for home plumbers this problem comes up years after the stored primer and glue have dried up! I was sent two items from Keeney that has about a 12 undersink fittings one 12 inch extension tube and one J tube(trap). Checking the J fitting against the original showed it was about the same dimensions J pipe still has the standard threaded fitting at the output. Standard thin wall pipe with a very smooth finish, part of the sealing depends on square cut end and no scraches on the pipe. O-ring and ss should work if put together carefully, no sharp edges or corrosive maintenance chemicals used. Keeney includes a tool for fast disassembly, can't do that using a glued fitting, it's separation depends on releasing the stainless steel spring that holds the seal. They have a good video on cutting and assembly at https://www.keeneymfg.com/installation_videos/40-Insta-Plumb Measure-cut-push in then hand tighten threaded joints and job is finished. [This review was collected as part of a promotion.]
Date published: 2018-12-07
Rated 4 out of 5 by from SHARKBITE style drain trap - surprise! When I got this I thought I was getting a "regular" trap. This co put the HIGHTECH push-style fitting on the top. Therefore, all you have to do is push this baby over the 1 1/2 drain pipe that comes down from a sink. I am all for trying to simplify. However, to remove, you have to keep a "C" clip handy to remove this fitting. I would have given it FIVE STARS if a "release" ring would have been built in. [This review was collected as part of a promotion.]
Date published: 2018-12-17
Rated 5 out of 5 by from Gread product for quick repairs This extension is made in China, but seems to be of good quality. The "bite" tangs that lock pieces together are solid, and the o-ring seems to provide a positive seal. No tools are required for assembly. There is an included "C" clip of sorts can be used to release the pieces after assembly if desired. Overall this seems well made and offers a simple and quick solution to making plumbing repairs. [This review was collected as part of a promotion.]
Date published: 2019-01-11
Rated 5 out of 5 by from 1 1/2 inch insta plumb J bend Very simple to use. Cut connection to length, slide fitting into place. No adhesive needed as advertised. Removal tool allows easy disconnection or rotation to line up connections. No leaking around joint so far. Plastic fittings can be cleaned and reused since no adhesive is used, saving time and money in the long run. Website videos useful to see how different kinds of connections work. [This review was collected as part of a promotion.]
Date published: 2019-01-05
  • y_2020, m_10, d_28, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_CA, sid_12365868, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 78ms
  • REVIEWS, PRODUCT