Product selection from CRAFTSMAN

Add to wish list

Impact Rated(TM) #1 Screw Extractor - M2 High-Speed Steel

Article #00276957 Model #CMAT131 Format #1

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Add to wish list

Description

This Craftsman(R) #1 screw extractor, made of durable, black-coloured M2 high speed steel, is part of the Impact Rated(TM) collection. It features the DoubleLok Technology(TM), which allows you to extract rusted or damaged screws and bolts with a single bit in three easy steps: drill, flip bit, and extract. Designed for impact drivers and quick-change chucks, this bit has a drill end made for fast starts with minimal walking, while the tip of the extractor end is serrated for increased torque to remove even the toughest bolts and screws.

Product specifications

Utilization

To extract rusted, stucked or damaged screws and bolts with an impact driver or a drill with quick-change chuck

Head Type

Drill bit at one end, screw extractor at the other

Color

Black

Collection

Impact Rated(TM)

Style

Double-sided DoubleLok Technology(TM)

Component

M2 high-speed steel

Size

#1 (DE-1)

Packaging

Each

Type

Screw extractor

Rated 5 out of 5 by LWAN from THERE IS HOPE! I'll start by saying I buy A LOT of stuff! And even when I really hate or really love something, I'm still too lazy to write a review. So this is a huge step for me to be writing this. For those out there like me who have a stripped screw destroying their sanity...THIS. THING. WORKS! I was about to give up hope, tried every trick in the book (rubber band, hot glue, etc). I was very pessimistic when I tried this screw extractor. The first attempt, it didn't work and I was at my wit's end. But...I decided to screw in a little deeper and IT FINALLY REMOVED THE MOST STUBBORN SCREW!! I am so very pleased that it worked. For those souls out there frustrated by the horrible curse that is a stripped screw, please give this a shot. Do be sure you get the right size. I had a fairly small screw so this worked. I'd probably by the multi-size pack next time for versatility. Life-saver. So happy.

Date published: 2020-11-16

Rated 5 out of 5 by Raj from Worked like a charm Just Youtube how to use a screw extractor and you should have no problem. Stripped a Phillips machine screw trying to flip the dryer door on a new purchase and did not expect this to work so easily...Got the stripped screw out in a minute! Great product! Should be in everyone’s tool kit.

Date published: 2020-05-31

Rated 4 out of 5 by Person from Works as it should [This review was collected as part of a promotion.] Works good as long as you drill the appropriate sized hole. Maintain firm pressure as you attempt to extract your screw, but not too much as you might strip the hole and make it harder to remove the fastener.

Date published: 2019-09-08

Rated 4 out of 5 by Deb from Best tool ever [This review was collected as part of a promotion.] Even though I have only had this tool for a few days, I have already used it three times. It gets the job done quickly.

Date published: 2018-10-17

Rated 5 out of 5 by DiegoInSeneca from These darn things WORK! No handyman here, but had a stripped screw standing between me and a good day. Found these gizmos online among many stripped-screw remedies (some of which I’d already tried, without success.) Didn’t know which size I needed, so bought both No. 1 and No. 2. Size 1 didn’t work, but size 2 got that screw out in a jiffy! Presto! Problem solved!

Date published: 2020-11-06

Rated 5 out of 5 by Tool Nut from Works Extremely Well! I purchased this to remove some stubborn, rusted Phillips head screws. This tool extracted the screws in 2 easy steps. The drill bit is even a left hand drive, so that as you drill the pilot hole, it doesn't further tighten the screw. Great addition to my tool box!

Date published: 2019-08-08

Rated 5 out of 5 by nparikh from Extraction Accomplished Worked like a charm on a small, but very frozen machine screw. After checking out multiple instructional videos and reviews I'm convinced that the trick to woking with easy-outs in general is high torque settings and VERY low speed to avoid breaking the tool.

Date published: 2020-10-12

Rated 5 out of 5 by Paula from best little tool ever! This little tool is invaluable! I have used it to get a hex screw that was stripped out from a shower handle as well as a stripped phillips head screw out from a wall switch in the last week. I wish I had bought this years ago!

Date published: 2021-01-17