
Description
The flush cut blade by Dremel Multi-Max is ideal for cutting doorjambs and baseboards in flooring installation. Used for precise cuts and plunge cuts, its wide 1 1/4" blade speeds through long cuts and can make plunge cuts up to 1 5/8" deep. Designed for cutting wood, drywall, plastic, and soft metal like copper and 6d-8d finishing nails. The blade's tooth pattern similar to a standard hacksaw blade.
You may also like
Flush Cut Blade 1 1/4" x 1/16" is rated
out of
5 by
26.
Rated 5 out of
5
by
Bonshell from
Fantastic Plunge Blade!
This blade, attached to my Dremel Multi Max performed perfectly. It cut through 3 copper water lines quickly, smoothly and cleanly. It cut just as well on the third line as it did on the first.
Date published: 2015-07-22
Rated 4 out of
5
by
RemodelMan from
Bi-metal oscillating saw blade is great.
When you need more finesse than a reciprocating saw for a remodel/repair job, these things are great. Cut through nails/wood. Down side is they are expensive and don't last a real long time... but when you need it you need it. Oscillating saw is one of the best purchases I've made for years when it comes to home repair and remodeling. They are a bit expensive, but allow you to do things that are otherwise impossible.
Date published: 2013-10-07
Rated 3 out of
5
by
Devo123 from
Not universal
Be sure to read the package to find out it it fits your brand of saw. Doesn't fit all brands nor does it have an adapter.
Date published: 2016-05-05
Rated 4 out of
5
by
threerace from
Bathroom Renovation
These blades are very time saving when renovating a bathroom, I removed everything down to the studs to find any damage, I removed the first layer of plywood flooring due to water damage in 2 spots. these blades helped cutting where other saws would not, great for cutting nails too
Date published: 2015-03-18
Rated 1 out of
5
by
tdm822 from
Will NOT cut Nails/screws
I bought to cut off screw heads on a project. The first screw head eat the teeth of the blade. I talk with Dremel rep and they said that the only thing that will cut anything bigger than finish nail is a carbide blade due out later in 2013.
Date published: 2013-01-08
Rated 5 out of
5
by
Billy from
Great Design
Loved it. Great for shearing nails to allow roof work with out destroying the shingles and also trimming siding in tight corners. It is a bit bulky but it is exceptional for flush trimming things
Date published: 2015-02-25
Rated 3 out of
5
by
xartemis from
Not universal
[This review was collected as part of a promotion.] The package indicates that this is a "universal" blade and the salesperson assured me that it was. However, it does not fit our Porter Cable oscillating tool.
Date published: 2015-06-07
Rated 4 out of
5
by
buythebook from
Meets expectation
Product works. I would recommend buying to use on light metal or wood projects.
Date published: 2015-08-12