• icon-wishlist
  • icon-cart
Product selection from FLIP TOGGLE

"FlipToggle" Anchor with Bolts - 3/16" x 2 1/2" - 10/PK

Article #04845652 Model #420R Format 3/16"x2.5"xPK10
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

The FlipToggle® anchor's strong mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. These anchors are very easy to install and fit in hollow walls up to three inches thick. Also, they are twice as strong as regular toggle bolts of the same diameter. A 1/2" diameter hole is required for installation. Finally, this model is 3/16" x 2 1/2" and sold in packs of 10 units, but FlipToggle® anchors are available in a wide variety of sizes and packages to suit your needs.

Product specifications

Capacity
120 lb (54 kg)
Thread Type
24 pitch
Component
Nylon/zinc
Color
White
Packaging
10/pack
Installation
Screws #10 x 2 1/2" (Included)
Width
3/16" (0.48 cm)
Length
2 1/2" (6.35 cm)
Bit
1/2" (Non-included)
Model
FlipToggle®
Style
With bolts

You may also like

"WallDriller" Anchors with Screws icon-wishlist
COBRA
"WallDriller" Anchors with Screws
Format #8xPK10
Details
Article #0484473
"Walldriller" Self-Drilling Anchors and Screws - #6 - 12 PK icon-wishlist
COBRA
"Walldriller" Self-Drilling Anchors and Screws - #6 - 12 PK
Format #6xPK12
Details
Article #0484472
"Walldriller" Self-Drilling Anchors and Screws - #8 - 10 PK icon-wishlist
COBRA
"Walldriller" Self-Drilling Anchors and Screws - #8 - 10 PK
Format #8xPK10
Details
Article #0484478
"WallGripper" Drywall Anchor icon-wishlist
COBRA
"WallGripper" Drywall Anchor
Format #8xPK/8
Details
Article #0484163
"WallDriller" Anchors with Screws icon-wishlist
COBRA
"WallDriller" Anchors with Screws
Format #8LxBT/25
Details
Article #0484167
Anchors with Screws icon-wishlist
COBRA
Anchors with Screws
Format 1"xPK/10
Details
Article #0484218
Plastic Anchor and Drill Bit TripleGrip(TM) # 8 - 15/Pack icon-wishlist
COBRA
Plastic Anchor and Drill Bit TripleGrip(TM) # 8 - 15/Pack
Format #8
Details
Article #0484437
"Walldriller" Self-Drilling Anchors and Screws - #8 - 4 PK icon-wishlist
COBRA
"Walldriller" Self-Drilling Anchors and Screws - #8 - 4 PK
Format #8xPK4
Details
Article #0484471
Anchors with Screws icon-wishlist
COBRA
Anchors with Screws
Format #8-10x1 1/4"
Details
Article #0484214
Anchors with Screws icon-wishlist
COBRA
Anchors with Screws
Format 1"xPK/30
Details
Article #0484213
Plastic Anchors - 1 1/4'' - Box of 75 - Blue icon-wishlist
COBRA
Plastic Anchors - 1 1/4'' - Box of 75 - Blue
Format 1 1/4"xBX75
Details
Article #0484173
"Walldriller" Self-Drilling Anchors and Screws - #6 - 12 PK icon-wishlist
COBRA
"Walldriller" Self-Drilling Anchors and Screws - #6 - 12 PK
Format #6xPK12
Details
Article #0484477
Plastic Anchor TripleGrip(TM) # 8  -  5/Pack icon-wishlist
COBRA
Plastic Anchor TripleGrip(TM) # 8 - 5/Pack
Format #8
Details
Article #0484435
Anchors with Screws icon-wishlist
COBRA
Anchors with Screws
Format 1 1/4"xPK/10
Details
Article #0484225
Anchors with Screws icon-wishlist
COBRA
Anchors with Screws
Format 1"xPK/10
Details
Article #0484217
Plastic Anchors - 1'' - Box of 100 - White icon-wishlist
COBRA
Plastic Anchors - 1'' - Box of 100 - White
Format 1"xBX100
Details
Article #0484172
"WallDriller" Anchors with Screws icon-wishlist
COBRA
"WallDriller" Anchors with Screws
Format #8LxBT/50
Details
Article #0484206
"Walldriller" Self-Drilling Anchors and Screws - #6 - 4 PK icon-wishlist
COBRA
"Walldriller" Self-Drilling Anchors and Screws - #6 - 4 PK
Format #6xPK4
Details
Article #0484470
"WallDriller" Anchors with Screws icon-wishlist
COBRA
"WallDriller" Anchors with Screws
Format #8LxBT/25
Details
Article #0484168
Plastic Anchor TripleGrip(TM) # 10 - 1 5/8'' - 4/Pack icon-wishlist
COBRA
Plastic Anchor TripleGrip(TM) # 10 - 1 5/8'' - 4/Pack
Format #10xPK4
Details
Article #0484426
Anchors with Screws icon-wishlist
COBRA
Anchors with Screws
Format 1"XPK/40
Details
Article #0484212
"WallDriller" Anchors with Screws icon-wishlist
COBRA
"WallDriller" Anchors with Screws
Format #8LxPK/4
Details
Article #0484204
Multi-Purpose Anchor icon-wishlist
COBRA
Multi-Purpose Anchor
Format #8xPK10
Details
Article #0484530
Plastic Anchor TripleGrip # 10 with Drill Bit- 10/Pack icon-wishlist
COBRA
Plastic Anchor TripleGrip # 10 with Drill Bit- 10/Pack
Format #10
Details
Article #0484428
"FlipToggle" Anchor with Bolts - 1/4" x 2 1/2" - 10/PK icon-wishlist
FLIP TOGGLE
"FlipToggle" Anchor with Bolts - 1/4" x 2 1/2" - 10/PK
Format 1/4"x2.5"xPK10
Details
Article #04845651

what is the weight load for these anchors.

Asked by: carl8601
They range from approx 30 pounds to 80 pounds, depending on the thickness of the drywall and upon the thickness of the screw/bolt that comes with the anchor. There is a chart on the packaging. I used the thicker screw version to install two floating shelves (ten inch deep shelves, rated for 20 pounds load) using 2 anchors per shelf in a location where there were no studs (newer house with studs 24 inches on centre) and the shelves feel feel strong once installed due to the toggle bar part of the anchor that remains behind the wall.This anchor is basically a combination of a metal toggle bolt plus a plastic socket that fills the hole plus a plastic strap to pull the toggle bar tight. The advantages of these anchors compared to old style metal toggle bolts are: Smaller hole (1/2 inch) since the toggle bar is solid metal and it folds in one piece to get it through the hole, stronger since the toggle bar is one solid piece, the plastic socket completely fills the hole. You install the toggle and socket first, by pushing then through/into the hole, then pull the toggle bar tight behind the wall using the strap, then cut the excess strap length with a utility knife, and then you attach what you want using the included anchor bolt. The u-shaped strap is grooved to guide the anchor bolt into the metal receiving socket in the toggle bar while you screw in the bolt.. TIPS: Install the anchor in the correct orientation so that the u-shaped trough in the strap points upward. Using a large drill bit such as half an inch (as per directions) makes the job go faster.
Answered by: Paul526
Date published: 2019-08-07

Do they come with bolts

Asked by: Sassieknightz
  • y_2020, m_7, d_11, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_CA, sid_04845652, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
"FlipToggle" Anchor with Bolts - 3/16" x 2 1/2" - 10/PK is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from strong, easier to install than old style toggles The 3/16 size is very strong, i.e. rated up to 80 pounds, depending upon the thickness of the drywall. I installed 2 decorative floating shelves (10" deep, rated 20 pounds load) using 2 anchors per shelf since no studs were available in that location. These anchors (even in multipack) are not cheap but the peace of mind is worth it. These are better than the old style metal toggle bolts since they include a plastic socket that completely fills the hole, and a u-shaped strap to tighten the toggle bar behind the wall before you insert the screw/bolt. The u-shaped strap guides the metal bolt into the receiving socket in the metal toggle bar, as long as you orient the u-shaped strap upwards as shown in the directions.You cut off the excess length of strap after tightening the strap. Tip: If you use a 1/2 inch drill bit (as per the instructions), then drilling the hole will be easier. I also drilled a smaller pilot hole first in order to ensure exact placement of the holes..
Date published: 2018-04-18
Rated 5 out of 5 by from Rock Solid I bought this package to mount the TV after the anchors that came with the wall mount failed. These things held solid! Great weight rating for one let alone 4 of them. I've also used them for large mirrors and it's not going anywhere.
Date published: 2018-09-21
Rated 5 out of 5 by from Awesome The best anchor I have ever used for drywall. Used them for towel bars, paper holders, and robe hooks. If the required holes for the device are too close to each other, just install on an angle.
Date published: 2019-02-17
  • y_2020, m_7, d_11, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_CA, sid_04845652, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT