• icon-wishlist
  • icon-cart
Product selection from EURAMAX

Fascia adapter

Article #0128074 Model #T0539
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

Fascia adapter

icon-wishlist

Description

Fascia fixer. Ready to use when rafter is exposed outside or when awning is not perpendicular to the ground.

You may also like

"Max Sturdiness" Gutter Shield icon-wishlist
ALU-REX ELEMENTS
"Max Sturdiness" Gutter Shield
Format 24'
Details
Article #13045004
CEMENT SEALANT icon-wishlist
PLASTMO
CEMENT SEALANT
Format 5OZ
Details
Article #5539018
Gutter leaf guard icon-wishlist
QUEST
Gutter leaf guard
Format 6"x25'
Details
Article #1401016
"K-Snap" Gutter Swing Outlet icon-wishlist
PLASTMO
"K-Snap" Gutter Swing Outlet
 
Details
Article #5539013
LEAF GUARD icon-wishlist
EURAMAX
LEAF GUARD
Format 4"X5'
Details
Article #0128025
Rain Gutter Protection - 5.25" x 20' icon-wishlist
ALU-REX ELEMENTS
Rain Gutter Protection - 5.25" x 20'
Format 5.25"x5'x20LF
Details
Article #13045006
Hi-Bak roof strain icon-wishlist
PRIMEAU
Hi-Bak roof strain
Format 4"
Details
Article #55655028
Gutter guard icon-wishlist
EURAMAX
Gutter guard
Format 3'x5"
Details
Article #01285037
Gutter Seamer Kit with Permanent Seal icon-wishlist
EURAMAX
Gutter Seamer Kit with Permanent Seal
 
Details
Article #76745057
Extensible Aluminium Gutter Strainer icon-wishlist
Extensible Aluminium Gutter Strainer
 
Details
Article #76745032
DOWNPIPE DIVERTER icon-wishlist
CONTINENTAL
DOWNPIPE DIVERTER
Format 8'
Details
Article #1322001
Hi-Bak roof strain icon-wishlist
PRIMEAU
Hi-Bak roof strain
Format 2"
Details
Article #55655032
Snap-in filter icon-wishlist
EURAMAX
Snap-in filter
Format 36"
Details
Article #01285038
Splash Pad icon-wishlist
EURAMAX
Splash Pad
Format 24"x12"x2 1/2"
Details
Article #0128020
Gutter Stuff Foam Filter - 48-in icon-wishlist
GUTTER STUFF
Gutter Stuff Foam Filter - 48-in
 
Details
Article #330692820
Splash Pad icon-wishlist
EURAMAX
Splash Pad
Format 24"x12"x2 1/2"
Details
Article #0128016
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Fascia adapter is rated 3.0 out of 5 by 3.
Rated 4 out of 5 by from This saved me loads of time on sloped fascia The first few were a bit difficult to put in, and I made a lot of holes. After that, I developed a system and was successful. These hangers make the job a bit clunky, but the real issue is the slant on the fascia. So you just need to install one hanger successfully, at the right level, with one these hangers in place and then remove it. Measure where the hole is in relation to you snap line, and you are golden. Also, use longer screws. I used 3 inch deck screws and that allowed me to screw the screw about an inch to an inch and a half past the hanger to put some pressure on the hole where I want to screw into the fascia (if that makes sense). Once this challenge was overcome, the rest went in fine. Beats cutting a bunch of wooden wedges and having to prime them (really adds a lot of time to your DIY job and I usually only have my weekends to get this done). Hope this helps... [This review was collected as part of a promotion.]
Date published: 2019-10-05
Rated 4 out of 5 by from Other reviews may be incorrect I think these wedges are attached to the back of the gutter... NOT the facial (as other reviews indicate). Then the gutter is attached to the facial using standard gutter hangers. "Ideally" (?) the screw on the hanger should go thru the top hole of the wedge, but I'm not sure how easy that is. Full disclosure, I have not used these wedges, just drawn this conclusion by searching internet and thought other 2 reviews are probably misleading. [This review was collected as part of a promotion.]
Date published: 2019-10-25
Rated 1 out of 5 by from Just not a good design The design of these hangers leaves much to be desired. To say that it's difficult to screw through the regular hangar, into these hangars, and then into your fascia board would be an understatement. It doesn't seem like it would be that difficult by looking at them on the shelf in the store, but realize that because of the way these (and the accompanying gutter hangars) are designed, you won't be driving a screw perpendicularly into your fascia. You will be driving in at a significant angle, and the likelihood of not getting good purchase into your fascia is high. I skewered my fascia pretty good in a few spots before giving up. If you really wanted to use these, you would need a longer screw (at least 2"), and probably have to drill pilot holes to ensure that the screw goes in where you want it. That would also help keep the whole assembly from shifting down as you drive the screw home. But... ain't nobody got time for that! Once you do have them in, you'll realize that one measly hole at the top of the hangar doesn't actually secure the piece behind the gutter. It rotates fairly easily. I quickly realized that my shed could survive with angled gutters, and saved quite a bit of money by returning these things. [This review was collected as part of a promotion.]
Date published: 2019-10-02
  • y_2019, m_12, d_8, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_CA, sid_0128074, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT