
Description
Concrete floor paint. Interior or exterior durability. Hot tire and chemical resistant. Self-priming; 1 coat coverage. UV and Weather resistant. Soap and water clean-up. Armour grey satin. 3.79L.
Product specifications
Finish
Satin
Size
3.79 l
You may also like
my garage is 530 sq ft ho w many cans will i need thanks hilary
I have personally used this product for indoor applications (floors) on several occasions, and I truly believe that it is the Best one for the price.
However, square footage coverage indicated on can isn't really accurate - in my opinion.
I would suggest 2 (two) 3.78L cans. I was getting about 250-ish sq ft per can.
Date published: 2020-05-05
Is the tint base clear or white ?
Hi Hawthorn,
Thank you for your question.
Our Epoxyshield Concrete Floor Paint is more of a murky clear color, which will then be tinted at the store.
We hope this answers your question. Feel free to contact us again if you require further information.
Date published: 2019-08-23
CAN IT FILL AND LEVEL SOME SMALL IRREGULARITIES OF THE SURFACE. CAN WE ALSO APLLY A SECOND COAT
Yes on both. I did 2 coats. I also added the optional grit to make it really slip resistant, and it is very successful from that viewpoint even when wet. Only, its flat finish shows the dirt. Esthetically, a high quality clear topcoat would be nicest, but it could be slippery.
Date published: 2019-07-29
Can it be applied over a previously painted garage floor? Assuming any peeling paint is removed?
Yes, the Epoxy Shield Concrete Floor paint can be applied to a previously painted surface provided the existing coating is in good condition, and well cleaned. Sanding the existing paint with 60 grit sandpaper prior to coating with the Epoxy Shield Floor paint is recommended.
Date published: 2019-07-29
How many square footage do it cover
Read the label but usually I would say less than 80% of it as our floor is not in perfect condition. Also it depends on the application.
Date published: 2019-07-29
Can you put the specs in the paint while it is setting like some of the other Rust-Oleum products has I have heard you can buy them separate
I don't think so but confirm it with the customer service.
Date published: 2019-07-29
can this be applied with a commercial electric airless sprayer?
The EpoxyShield Concrete Floor paint should be applied with a roller for best results.
Date published: 2019-08-10
Is it tintable? Or just grey?
The Epoxy Shield Concrete Floor Paint is available in both a pre-tinted gray, and a tint base.
Date published: 2019-07-29
Rust-Oleum - Concrete Floor Paint - Acrylic - 3.79 L - Satin Finish is rated
out of
5 by
5.
Rated 4 out of
5
by
Ray Hui from
Job done
Very easy to apply. Odor not that strong and only needs overnight to dry. 2 in 1.
Date published: 2018-04-01
Rated 1 out of
5
by
Ed one from
Don't buy this product
I bought this product at Lowe's and installed it on my garage floor (new construction). I followed all the instructions, acid etched the concrete etc. The product is coming off the concrete, in some cases peeling off in big pieces.
Date published: 2017-12-20
Rated 1 out of
5
by
Shelshocked from
Poor product from a trusted brand name
Used this inside the water room in the house-fine there as it doesn't get wet. Used the rest of the can, plus another to do the garage floor after I scrub-washed it. Has flaked off where it gets wet such as under the garage door weatherstrip and under the garage mat we park on. Your better off spending less for interior application and more for garage/exterior applications.
Date published: 2020-02-18
Rated 4 out of
5
by
Anonymous from
Garage Floor paint
The Rust-oleum Epoxy was easy to apply and the finish has not marked or scratched. Very durable.
Date published: 2020-09-05
Rated 4 out of
5
by
WONeill from
Happy with overall finish
Looks great on the floor. Quick drying and easy to apply.
One negative is if anything is dragged across the floor It scratches the paint.
Date published: 2021-02-10