Rust-Oleum - Concrete Floor Paint - Acrylic - 3.55 L - Satin Finish

Hi Rick Rod, Our Epoxyshield Concrete Floor Paint is for bare concrete only.

It is a water based product and does have an odor but is not as smelly as an oil-based product

There are pre-determined colors with their formulas and we do not recommend to go outside of these colors

I have personally used this product for indoor applications (floors) on several occasions, and I truly believe that it is the Best one for the price. However, square footage coverage indicated on can isn't really accurate - in my opinion. I would suggest 2 (two) 3.78L cans.  I was getting about 250-ish sq ft per can.

Hi Hawthorn, Thank you for your question. Our Epoxyshield Concrete Floor Paint is more of a murky clear color, which will then be tinted at the store. We hope this answers your question. Feel free to contact us again if you require further information.

Yes on both. I did 2 coats. I also added the optional grit to make it really slip resistant, and it is very successful from that viewpoint even when wet. Only, its flat finish shows the dirt. Esthetically, a high quality clear topcoat would be nicest, but it could be slippery.

Yes, the Epoxy Shield Concrete Floor paint can be applied to a previously painted surface provided the existing coating is in good condition, and well cleaned. Sanding the existing paint with 60 grit sandpaper prior to coating with the Epoxy Shield Floor paint is recommended.

Read the label but usually I would say less than 80% of it as our floor is not in perfect condition. Also it depends on the application.