• icon-wishlist
  • icon-cart
Product selection from DREMEL

SET SCREW MANDREL

Article #1916025 Model #402 Format 1/8"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

For all cutting, sanding and polishing wheels.

You may also like

eco
Multi-Tool Wood Flush Cut Blade - 1 1/4"- 5-Pack - Industrial - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
Multi-Tool Wood Flush Cut Blade - 1 1/4"- 5-Pack - Industrial - Exchangeable
Format 1 1/4"xPK5
Details
Article #34595725
eco
EAB Tool HCS Flush Cut Blade for Wood - Professional Oscillating Accessory - 1 1/4" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool HCS Flush Cut Blade for Wood - Professional Oscillating Accessory - 1 1/4" - Exchangeable
Format 1 1/4x3.5"
Details
Article #34595673
eco
EAB Tool 4-Blade Starter Set - Professional Oscillating Accessory - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool 4-Blade Starter Set - Professional Oscillating Accessory - Exchangeable
Format 1 1/4"x2 3/4"xPK4
Details
Article #09065021
Carbide Flush Cut Blade 1 1/4" icon-wishlist
DREMEL
Carbide Flush Cut Blade 1 1/4"
Format 1 1/4"
Details
Article #19165117
eco
Wood/Metal Flush Cut Blade - 1 1/4" - 5-Pack - Industrial - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
Wood/Metal Flush Cut Blade - 1 1/4" - 5-Pack - Industrial - Exchangeable
Format 1 1/4"xPK5
Details
Article #34595736
eco
EAB Tool HCS Speedy Flush Cut (Wood) - Professional Oscillating Accessory - 2 3/4" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool HCS Speedy Flush Cut (Wood) - Professional Oscillating Accessory - 2 3/4" - Exchangeable
Format 2 3/4x3 1/2"
Details
Article #34595676
Flush Cut Blade 1 1/4" x 1/16" icon-wishlist
DREMEL MULTI-MAX
Flush Cut Blade 1 1/4" x 1/16"
Format 3/4x1/16"
Details
Article #19165100
eco
EAB Tool Bimetal Flush Cut Blade for Wood and Metal - Professional Oscillating Accessory - 1 1/4" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool Bimetal Flush Cut Blade for Wood and Metal - Professional Oscillating Accessory - 1 1/4" - Exchangeable
Format 1 1/4x3 1/2"
Details
Article #34595674
"Zipbits" Drywall Bit icon-wishlist
ROTOZIP
"Zipbits" Drywall Bit
Format ST8
Details
Article #19165060
Wood and metal blade icon-wishlist
DREMEL
Wood and metal blade
Format 1 1/8"
Details
Article #19165070
eco
EAB Tool 2 3/4" HCS Flush Cut (Wood) - Professional Oscillating Accessory - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool 2 3/4" HCS Flush Cut (Wood) - Professional Oscillating Accessory - Exchangeable
Format 2 3/4x3.5"
Details
Article #09065012
Hardwood blade icon-wishlist
DREMEL
Hardwood blade
Format 1 1/8"
Details
Article #19165088
CUT-OFF WHEEL icon-wishlist
DREMEL
CUT-OFF WHEEL
Format 1 1/4"xPK/5
Details
Article #1916199
eco
EAB Tool Hook and Loop Pad Professional Oscillating Accessory - 3" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool Hook and Loop Pad Professional Oscillating Accessory - 3" - Exchangeable
Format 3x3.5"
Details
Article #34595675
CUT-OFF WHEEL icon-wishlist
DREMEL
CUT-OFF WHEEL
Format 1 1/4"
Details
Article #1916031
Drum Sander Band icon-wishlist
DREMEL
Drum Sander Band
Format 1/2"xGR60xPK6
Details
Article #1916027
BLADE icon-wishlist
DREMEL
BLADE
 
Details
Article #1916316
DOWEL JIG icon-wishlist
WOLFCRAFT
DOWEL JIG
 
Details
Article #1137056
Blades - Set of 3-in. Drywall Blade icon-wishlist
DREMEL
Blades - Set of 3-in. Drywall Blade
Format 3"x3PC
Details
Article #19165063
eco
EAB Tool Sandpaper Professional Oscillating Accessory - 3" x 60 Grit - 10/Pack icon-wishlist
EXCHANGE-A-BLADE
EAB Tool Sandpaper Professional Oscillating Accessory - 3" x 60 Grit - 10/Pack
Format 3x3 1/2"x60GT
Details
Article #34595678
MANDREL icon-wishlist
DREMEL EZ LOCK
MANDREL
 
Details
Article #1916269
eco
Flush Cut Professional Oscillating Accessory - Carbide Tipped - 1 1/4 in. - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
Flush Cut Professional Oscillating Accessory - Carbide Tipped - 1 1/4 in. - Exchangeable
Format 1 1/4"
Details
Article #34595898
CUTTING BIT icon-wishlist
DREMEL
CUTTING BIT
Format 1/8XS1/8"
Details
Article #1916179
CUT-OFF WHEEL icon-wishlist
DREMEL EZ LOCK
CUT-OFF WHEEL
Format CR/5
Details
Article #1916271
Metal Flush Cut Blade 3/4" icon-wishlist
DREMEL
Metal Flush Cut Blade 3/4"
Format 3/4"xPK3
Details
Article #19165073
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
SET SCREW MANDREL is rated 1.7 out of 5 by 45.
Rated 4 out of 5 by from It's not as hard as you think! I'm not an avid tool user, but I do use my dremel for small projects (like adding a bevel to my drawing board to prevent artwork from slipping off). I actually had no issue with the mandrill. I found it works best if you screw it into the dremel, then hold the ferrule for grip/support, and use a short screwdriver to remove the screw. I do agree with another reviewer though, in that there should be mandrill screws sold separately, since the mandrill is way stronger than the screw itself, so having to replace the entire piece is kind of a waste.
Date published: 2016-05-20
Rated 1 out of 5 by from Same issue This is absurd to me. Not only did the original mandrel included in my Dremel kit fail to detach from the screw, but the brand NEW one that I purchased separately will not budge either. To make matters worse, inserting the mandrel in the lock position of the Dremel to aid in screw detachment (as recommended) has now caused so much friction that it had damaged the tools ability to stay in position at all. The entire collet nut just rotates with every turn of the screw driver. This is clearly a recurring issue for people. Why not just sell the device with the screw detached in the first place? The tool is now worthless to me.
Date published: 2018-11-02
Rated 1 out of 5 by from Screw broke off inside mandrel on first use I purchased the Dremel 7700 which came with a kit, I needed to use a cutting wheel for a project, I removed the screw to attach the wheel and as I was screwing it back in it wouldn't go any further than half way in. When I removed the screw to see what was the problem I noticed that the tip was broke off inside the Mandrel! This was upon first use, right after removing the Dremel and accesories out of the box.
Date published: 2019-03-24
Rated 2 out of 5 by from The screw is stuck Like the others, I am no longer able to use the mandrel as I can't undo the screw to remove the cutting wheel that's on there.
Date published: 2015-11-20
Rated 1 out of 5 by from What are u going to do about the screw, Dremel? Dremel, you need to give some re-assurance that you are going to change something (like the metal compound or the threading or something else) in the 402 to avoid such problems. It's breaking on first use! We are not talking about a "worn" problem here. You are regarded as a high-quality brand so this situation is plain unacceptable. Tell everybody (not just me privately) what you are going to do about it (and hopefully when). Also how can we know what we buy is a "good" one? Like a number or color on the packaging for instance. And PLEASE do not divert the subject by pushing the "EZ LOCK" system. This is NOT an acceptable answer as it is NOT a 1:1 replacement since none of the plain discs will fit the EZ lock.
Date published: 2019-11-02
Rated 5 out of 5 by from IT WORKS WITH ALITTLE TRICK I've read alot of reviews concerning this product...most of them say that the screw has been put in way to tight, and all of you are correct.....however, with this trick, I got mine to loosen up and work....first put some WD-40 on the screw head and wait for awhile, then, with a small hammer or ball pein, tap LIGHTLY on the thick part rolling it as you do so....mine loosened right up.....no problem [This review was collected as part of a promotion.]
Date published: 2019-04-19
Rated 1 out of 5 by from Poor quality I have not been able to use it because the tiny little screw is in there so tight that I can not get it loose. It will not budge! I was looking forward to using it today. After having trouble with it, I went on line thinking maybe the screw is not suppose to come out and I was doing something wrong. After reading the other reviews, I believe my continued efforts to try to remove it will prove to be a waste of my time. I do like everything else about the Dremel tool, but this accessory is a big disappointment.
Date published: 2015-07-02
Rated 4 out of 5 by from Dremel 402 Mandrel This product makes your Dremel tool super easy to change implements. I used it for the 420 Cutting wheel and when I decided that I needs to switch to a standard 3/8 chuck drill, it was no problem. The only problem I had with the mandrel was the screw that holds the implement to the shaft. It takes a fairly small flat screwdriver to manipulate the screw, which I do not keep standard on my work bench. But its made of fairly sturdy material and I was able to use pliers to break it loose when I needed to changed cutting wheels. Overall it does the job and that's what I needed it to do.
Date published: 2013-04-16
  • y_2020, m_7, d_13, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_45
  • loc_en_CA, sid_1916025, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT