
Description
Cladmate CM20 polystyrene foam insulation panel. 2 ft. x 8 ft. 2 in. thick. Shiplap. For outdoor use and foundations.
Product specifications
Type
Rigid Insulation Panel
Component
Extruded Polystyrene Insulated Sheathing
Thickness
2"
Width
2'
Length
8'
You may also like
Ok what is the thicness of this board ?'x2"x8"
1/2" as the product description says 12.7mm. The sku number matches the 1/2" foam that I bought earlier this year.
Date published: 2021-02-13
What is the R rating on this product
R2.5 because it's 1/2" thick - cladmate xps foam is R5 for every inch of thickness
Date published: 2021-01-04
can this be used between the floor joists and plywood sub-floor for a cottage to provide some insulation and avoid cold bridges at the joists?
Hi, Mikemaninsul! Thanks for your question about DuPont™ Styrofoam™ Brand Cladmate™ Extruded Polystyrene (XPS) Foam Insulation. We apologize for the delay in responding to your question, there were some system issues that prevented us from receiving it until now. We would not recommend that you use Styrofoam™ Brand Extruded Polystyrene (XPS) Foam Insulation this manner as the point loads are too high. Instead, we'd recommend that a layer of plywood be placed directly on the joists followed by foam, and then a second layer of plywood. In addition, we'd recommend that you use a Type 4 foam, such as DuPont™ Styrofoam™ Brand SM Extruded Polystyrene (XPS) Foam Insulation, instead of the DuPont™ Styrofoam™ Brand Cladmate™ XPS.
Date published: 2020-10-23
Can I use this to put over 3" pvc pipe underground for added insulation. To cover sub pump pipe.
Sure you can use to protect from frost or freezing. I have personally used to block frost and freezing for a water line @ my cottage. I also used it to protect footing from frost 1 inch equals 1' of soil
Date published: 2020-12-16
Can it be use on a basement floor for a sub floor
Can it be used on basement walls?
Date published: 2020-10-29
What’s the r value?
Thickness is 0.5" so I guess 2.5
Date published: 2021-01-27
How thick is the board? I see 2x8 but not thickness.
They like mixing units, metric and imperial. They used 12.70 mm instead of 1/2 inch. Imperial for feet.
Date published: 2020-07-07