
Description
Fixing and drilling in tight places is child's play with this DEWALT 90-degree angle attachment. Its compact design with metal-gear case makes it a robust and powerful tool. The chuck includes a ring magnet, which secures the fastener and helps reduce slipping and wobble.
Product specifications
Angle
Right
Chuck
1/4" (6.35 mm) hex quick-change chuck
Type
Attachment
Utilization
Wood and metal
Height
8 3/4" (22.23 cm)
Width
1 7/8" (4.76 cm)
Depth
3 29/32" (9.92 cm)
You may also like
DeWalt Hex Right-Angle Attachment - 1/4" is rated
out of
5 by
55.
Rated 4 out of
5
by
Dominion from
Great but could be better
[This review was collected as part of a promotion.] This is the smallest one available at Lowe’s which is great cause it fits into tight places. The only thing I would change about it is if there were an optional set screw or if the bit socket was s snap in type like on my impact driver. Cause when I’m using it to drill the bit often comes out when backing out of the hole since it’s just a magnetic socket. Other than that it’s great. If you could figure out a way to put a removable handle on it without making it any bigger, that would be great also. Maybe a stainless split screw with a band that wraps around body.
Date published: 2019-08-28
Rated 5 out of
5
by
Tracy from
Great for the money
[This review was collected as part of a promotion.] Although small and a bit pricey, it seems to carry all of Dewalt's quality. I have not used it very much yet, but the half dozen or so holes I have done were accomplished easily. Keep in mind that this will require bits or drivers with a hex base; it is not a chuck.
Date published: 2019-03-07
Rated 5 out of
5
by
GMan007 from
exaxtly what i needed and worked great!
I needed to secure a top to a dresser I built but my drill was too big to fit in the space. I picked this up and it worked great. It is small, which i needed, but worked with my impact gun.
Date published: 2019-08-15
Rated 5 out of
5
by
KDub from
Fantastic!!!!!
[This review was collected as part of a promotion.] I love this attachment. It works much better than the flexible unit for medium to heavy tasks. I used it to drill some 1” holes in some 2x using a spade bit with ease. I was very impressed. I am buying a second one just to have it.
Date published: 2019-05-10
Rated 5 out of
5
by
JOHN from
BEST FOR A TIGHT PLACE!
[This review was collected as part of a promotion.] I have a few custom electrical boxes where I cannot use a regular screwdriver, nor screw gun. This does the job perfectly, precisely, and no effort.
Date published: 2019-03-03
Rated 5 out of
5
by
Curly from
Excellent
[This review was collected as part of a promotion.] Would recommend to anyone. I work in HVAC and it has come in handy many times over. Time saver. Struggle inhibitor!
Date published: 2019-03-04
Rated 5 out of
5
by
Fuff from
If Only
On my slanted soffit the drill would not fit at an angle that would allow screws to be installed. Couldn’t use nails because there wasn’t room to swing hammer enough to start them. This attachment saved the day by using the drill to power drive the screws easily and perfectly while hanging from a ladder and holding J-channel simultaneously. No knuckle scuffing. No swear word exclamations. Suddenly the j-channel was up straight and ready to receive soffit. Hold tool in position with dominant hand (right handed for me) and use drill as a motor for powering its spin. Impact drill worked with ease.
Date published: 2021-01-22
Rated 5 out of
5
by
Mike from
Dewalt right angle attachment
[This review was collected as part of a promotion.] This has been an excellent tool on my hammer drill as I needed to to place screws in the side wall of a light recessed can. Perfect for getting into tight places.
Date published: 2019-06-30