• icon-wishlist
  • icon-cart
Product selection from DREMEL

CUT-OFF WHEEL

Article #1916031 Model #426 Format 1 1/4"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

CUT-OFF WHEEL

icon-wishlist

Description

.045 in. thick. fibreglass reinforced. For slicing and cutting metal, wood and plastics. Discs make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The disc cuts only along its edge. Do not attempt to sand or cut curved holes with them. Use with mandrel #402. Do not run in excess of 30,000 RPM.

You may also like

Metal Cut-Off Disk - 3 1/2" icon-wishlist
ROTOZIP
Metal Cut-Off Disk - 3 1/2"
Format 3 1/2"
Details
Article #8126008
FLOOR TILE BLADE icon-wishlist
ROTOZIP
FLOOR TILE BLADE
Format 3 1/2"
Details
Article #8126016
Abrasive Cup Brush for Grinders - Steel - 3" icon-wishlist
Abrasive Cup Brush for Grinders - Steel - 3"
 
Details
Article #94945120
eco
Multi-Tool Blade Starter Set - 4 Blades icon-wishlist
EXCHANGE-A-BLADE
Multi-Tool Blade Starter Set - 4 Blades
Format 1 1/4"x2 3/4"xPK4
Details
Article #09065021
CUTTING BIT icon-wishlist
ROTOZIP
CUTTING BIT
Format 1/8XT1/8"
Details
Article #8126017
FINISHING PAD icon-wishlist
DREMEL EZ LOCK
FINISHING PAD
Format CR/2
Details
Article #1916268
SOCKET icon-wishlist
DREMEL
SOCKET
Format 1/8"
Details
Article #1916019
eco
Multi-Tool Rigid Scraper Blade - 2" icon-wishlist
EXCHANGE-A-BLADE
Multi-Tool Rigid Scraper Blade - 2"
Format 2x3.5"
Details
Article #09065025
Saw-Max(TM) Crown Moulding Cutting Guide icon-wishlist
DREMEL
Saw-Max(TM) Crown Moulding Cutting Guide
 
Details
Article #19835903
SOCKET icon-wishlist
ROTOZIP
SOCKET
Format 1/8"
Details
Article #8126018
MANDREL icon-wishlist
DREMEL EZ LOCK
MANDREL
 
Details
Article #1916269
Rotary Tool Abrasive Sanding Triangles - 6-Pack icon-wishlist
BOSCH
Rotary Tool Abrasive Sanding Triangles - 6-Pack
Format PK6
Details
Article #19835678
4-Piece Socket Set icon-wishlist
DREMEL
4-Piece Socket Set
 
Details
Article #1916023
Stand Shaft icon-wishlist
DREMEL
Stand Shaft
 
Details
Article #1916101
eco
Multi-Tool Flexible Scraper Blade - 2" icon-wishlist
EXCHANGE-A-BLADE
Multi-Tool Flexible Scraper Blade - 2"
Format 2x3.5"
Details
Article #09065026
Wall and Floor Grout Remover icon-wishlist
DREMEL
Wall and Floor Grout Remover
Format 1/16"x30DG
Details
Article #1916148
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
CUT-OFF WHEEL is rated 4.6 out of 5 by 50.
Rated 5 out of 5 by from Excellent Product I haven't used the Dremel cut-off tool in a while. The old ones could only cut a couple of nails before wearing out. I needed to cut off over 500 nails. I talked to a Lowe's associate and he said they had been improved. He was right. I was able to cut off 20-25 nails with one cut-off abrasive tool. It make short work of an otherwise daunting project. He also told me about the quick-change tool to make changing the cut-off tools a breeze. It worked beautifully. Lots of changes with the Dremil tool that I didn't know about. However, the Lowe's guy did and I was impressed.
Date published: 2014-05-05
Rated 5 out of 5 by from Impressive! I just used one of these to cut a kitchen faucet body in order to remove it from the sink when I couldn't free the nut on the bottom side of the sink basin. It worked great; no breakage or sign of wear. I think I will be using these from now on in place of the plain abrasive cutoff wheels.
Date published: 2015-01-01
Rated 5 out of 5 by from Great for my purpose I bought these because the wheel which came in the box with my Dremel broke on me mid-project. The reinforced version helped me quickly cut the toilet floor-screws off. I was very pleased.
Date published: 2013-09-07
Rated 5 out of 5 by from Dremel 1-1/4" cut-off wheels. This small cutoff wheel allowed me to make needed modifications to the nylon turn signal cancel cam in the steering column of my old Chevy pickup. The modification was necessary to connect the horn wiring from an aftermarket steering wheel. This is a must-have tool for doing any kind of abrasive cutoff work in small hard to get at places. [This review was collected as part of a promotion.]
Date published: 2019-01-12
Rated 3 out of 5 by from Works GREAT, has a BIG drawback Works on harder metals such as steel, FINE. But, on softer metals, such as Copper, braas, bronze, Aluminum, plastics, etc. It works TERRIBLE. It CUTS great for about 1 minute, then, the wheel gets gummed up, as the softer metal, melts fromt the heat, and gums up the wheel, as it hardens on the wheel, rendering it USELESS. SO, for cutting steel, It's a winner, soft metals, FIND something, with a more Rough cut, so it won't be gummed up quite so fast.
Date published: 2014-08-12
Rated 3 out of 5 by from Too expensive Great for delicate cutting/shaping work on things that aren't too big; i.e. but don't expect to cut through a slab of steel with them! Even on small items like plastic or light metal, they get used up FAST--then you have to buy more. The price for what you receive is no bargain....there's no way that something this small should cost this much; but Dremel know they have us over a barrel--it you WANT them--you'll PAY for it.....
Date published: 2015-09-10
Rated 5 out of 5 by from Garbage Disposal Replacement 12 year old disposal demo... needed to cut 3 metal Flange ring tabs securing the disposal mounting hardware, under kitchen sink. The metal was approximately 1/4 inch thick and little room to operate! A Dremel Tool and 2 fiber cutting wheels completed the removal in about 10 minutes time!!! *Highly Recommended* [This review was collected as part of a promotion.]
Date published: 2018-08-15
Rated 5 out of 5 by from Works for masonry, too! I was hoping that this cutting wheel would work for masonry because it's labeled for metal cutting (it does!). I'm using it to cut mortar under porcelain tile for tile leveling spacers, and it works better than the more expensive Dremel metal carbide cutter. [This review was collected as part of a promotion.]
Date published: 2019-11-30
  • y_2019, m_12, d_14, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_50
  • loc_en_CA, sid_1916031, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT