• icon-wishlist
  • icon-cart

Corner Tie - 18-Gauge Steel - 90 Degrees

Article #31755015 Model #TTC24-TZ
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

Corner Tie - 18-Gauge Steel - 90 Degrees

icon-wishlist

Description

Use this corner tie in multiple construction projects to connect two pieces of wood. It is recommended for use with treated lumber. Easy to install with wood screws (not included).

Product specifications

Model
90 degrees
Type
Corner tie
Component
Steel
Finish
Triple zinc
Width
2" (5 cm)
Length
7" (17.78 cm)
Gauge
18

You may also like

Steel Angle "ZMAX" 1 1/2" x 10 1/4" x 1 1/2" icon-wishlist
SIMPSON STRONG-TIE
Steel Angle "ZMAX" 1 1/2" x 10 1/4" x 1 1/2"
Format 1.5x10.25x1.5"
Details
Article #35945189
KOHLER Catalan Ganging Hardware - Aluminum icon-wishlist
KOHLER
KOHLER Catalan Ganging Hardware - Aluminum
 
Details
Article #330676146
Galvanized Steel Angle 2 3/8" x 1 3/8" x 9" icon-wishlist
SIMPSON STRONG-TIE
Galvanized Steel Angle 2 3/8" x 1 3/8" x 9"
Format 2.375"x1.375"x9"
Details
Article #35945193
Steel Fence Brackets - 2" x 4" - 100/Box icon-wishlist
MITEK
Steel Fence Brackets - 2" x 4" - 100/Box
Format 100/BX
Details
Article #67495245
Mending Plate icon-wishlist
MITEK
Mending Plate
Format 1X4"
Details
Article #0348037
Roof Trusse - 18-Gauge Steel - 30 Degrees icon-wishlist
Roof Trusse - 18-Gauge Steel - 30 Degrees
 
Details
Article #30737857
Galvanized Steel Strap Tie 1 1/4" x 9" - Box of 50 icon-wishlist
MITEK
Galvanized Steel Strap Tie 1 1/4" x 9" - Box of 50
Format 1 1/4"x9xBX50
Details
Article #67495145
Galvanized Steel Clip 1/2" - 20 Gauge - Bag of 50 icon-wishlist
SIMPSON STRONG-TIE
Galvanized Steel Clip 1/2" - 20 Gauge - Bag of 50
Format 50BG
Details
Article #85895077
Mending Plate icon-wishlist
MITEK
Mending Plate
Format 2x4"
Details
Article #0348038
Galvanized Steel Angle 4" x 4" icon-wishlist
SIMPSON STRONG-TIE
Galvanized Steel Angle 4" x 4"
 
Details
Article #35945122
Galvanized Steel "ZMAX" Rafter Tie - Box of 100 icon-wishlist
SIMPSON STRONG-TIE
Galvanized Steel "ZMAX" Rafter Tie - Box of 100
Format 100BX
Details
Article #85895041
"Rigid Tie" Angle "ZMAX" 5" x 5" x 4 1/2" icon-wishlist
SIMPSON STRONG-TIE
"Rigid Tie" Angle "ZMAX" 5" x 5" x 4 1/2"
Format 5x5x4.5"
Details
Article #35945233
Mending Plate icon-wishlist
MITEK
Mending Plate
Format 5x1 13/16"
Details
Article #0348026
MiTek N10C Nails - .148 x 3" - 1 lbs - Galvanised Steel icon-wishlist
MiTek N10C Nails - .148 x 3" - 1 lbs - Galvanised Steel
Format 3" 1LB
Details
Article #31755023
Post Anchor - 4" X 6" - Steel icon-wishlist
Post Anchor - 4" X 6" - Steel
Format 4"x6"
Details
Article #30739268
Galvanized Steel Strap Tie 1 1/4" x 12" - Box of 50 icon-wishlist
MITEK
Galvanized Steel Strap Tie 1 1/4" x 12" - Box of 50
Format 11/4"x12xBX50x20GA
Details
Article #67495146
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Corner Tie - 18-Gauge Steel - 90 Degrees is rated 4.9 out of 5 by 22.
Rated 5 out of 5 by from So easy to use I built a rolling workbench for my shop with these corner ties and it was so easy, and I think it looks great!
Date published: 2013-09-01
Rated 5 out of 5 by from The perfect piece of hardware I used this product along with another piece of the similar line as struts and braces to create my made from scratch workbench out 2x4s and maple shelf tops. Overall dimensions are L86" x W27" x H40" (see attached photo). This product made my bench do strong that feels like one solid piece of wood.
Date published: 2015-03-25
Rated 5 out of 5 by from great for my new workbench I used four of these to make a workbench. With four of these brackets a half sheet of plywood and a couple 2x4s, I was able to make a sturdy, cheap, and fast bench. the brackets worded very well at keeping everything square and secure.
Date published: 2013-12-10
Rated 5 out of 5 by from Structural integrity - check Used four of these corner ties to construct a rolling workbench. These pretty much self square all components, side rails, end rails to the legs. Nevertheless, I always clamp on my corner 90's to ensure things are squared up and firmly butted together before I started inserting the screws. I used 3/4" #8 wafer head screws and 2 1/2" wafer head screws where they would penetrate into the adjoining end 2x4 rail. I built it on my garage floor, which is smooth and flat. Really helps all the joints lay on the same plane. Of course it's critical to pre-cut all of your 2x4 components with accurate 90 degree ends. I added additional 2x4 45 degree braces to the long rails and legs for additional stability. This workbench is so strong and stable I expect to get decades of use out of it. Not only do these USP brackets provide exceptional structural integrity, they look super cool as well.
Date published: 2018-06-03
Rated 4 out of 5 by from corner stabilizer I am using this as a corner stabilizer for an above ground garden. It works well and was easy to install.
Date published: 2015-10-18
Rated 5 out of 5 by from Great for building a loft in storage unit. Easy to construct a loft in my storage unit. Very sturdy using 2 X 4 studs and a sheet half inch plywood. A great place to store some oh the lighter items.
Date published: 2014-03-29
Rated 5 out of 5 by from 90 Degree Corner Bracket Good product for those home projects using 2x4's. Great for building shelves, work benches, stands, backyard sheds and animal cages.
Date published: 2015-02-05
Rated 5 out of 5 by from Corner ties Looks good
Date published: 2017-05-24
  • y_2019, m_12, d_5, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_CA, sid_31755015, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT