• icon-wishlist
  • icon-cart
Product selection from BOSCH

CONCRETE DRILL BIT

Article #1983027 Model #HC2041 Format 1/4x4"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

CONCRETE DRILL BIT

icon-wishlist

Description

Carbide tip, SDS shank.

Frequently bought together

SDS-plus® Rotary Hammer - 7/8'' icon-wishlist
BOSCH
SDS-plus® Rotary Hammer - 7/8''
Format 3/4"x6A
Details
Article #1983128

You may also like

Titanium Drill Bit - Impact Ready - 1/2" icon-wishlist
DEWALT
Titanium Drill Bit - Impact Ready - 1/2"
Format 1/2"
Details
Article #00275991
Dewalt SDS Plus Masonry Drill Bit - 5/32" x 4 1/2" icon-wishlist
DEWALT
Dewalt SDS Plus Masonry Drill Bit - 5/32" x 4 1/2"
Format 5/32x4 1/2x6 1/2
Details
Article #00275071
Titanium Drill Bit Set - Impact Ready - 5 Pieces icon-wishlist
DEWALT
Titanium Drill Bit Set - Impact Ready - 5 Pieces
Format ST5
Details
Article #00275992
Insert Bit for Impact Driver icon-wishlist
DEWALT
Insert Bit for Impact Driver
Format #3x1"
Details
Article #00275421
Titanium Drill Bit Set - Impact Ready - 10 Pieces icon-wishlist
DEWALT
Titanium Drill Bit Set - Impact Ready - 10 Pieces
Format ST10
Details
Article #00275993
Insert Bit for Impact Driver icon-wishlist
DEWALT
Insert Bit for Impact Driver
Format #2x1"
Details
Article #00275422
Black Oxide Drill Bit Set - 21-Pieces icon-wishlist
BOSCH
Black Oxide Drill Bit Set - 21-Pieces
Format ST21
Details
Article #19835794
Titanium Drill Bit - Impact Ready - 3/16" icon-wishlist
DEWALT
Titanium Drill Bit - Impact Ready - 3/16"
Format 3/16"
Details
Article #00275981
Insert Bit icon-wishlist
DEWALT
Insert Bit
Format #2x2"
Details
Article #00275423
Titanium-Coated Drill Bit Set - 21-Pieces icon-wishlist
BOSCH
Titanium-Coated Drill Bit Set - 21-Pieces
Format ST21
Details
Article #19835795
Wood Screws - #8 - 1 3/4" - 2000 Box icon-wishlist
QUIK DRIVE
Wood Screws - #8 - 1 3/4" - 2000 Box
Format #8x1 3/4"xBX2000
Details
Article #39195025
Titanium Drill Bit - Impact Ready - 13/64" icon-wishlist
DEWALT
Titanium Drill Bit - Impact Ready - 13/64"
Format 13/64"
Details
Article #00275982
Socket Extension - 1/4" X 3/8" X 2 1/2" - Hardened Steel icon-wishlist
DYR
Socket Extension - 1/4" X 3/8" X 2 1/2" - Hardened Steel
Format 1/4x3/8x2 1/2"
Details
Article #5858176
DRILL BIT WD AUGER icon-wishlist
IRWIN
DRILL BIT WD AUGER
Format 7/8X71/2"
Details
Article #0159078
SDS Plus(R) Bulldog(TM) Drill Bit - 1/4" x 8 1/2" icon-wishlist
BOSCH
SDS Plus(R) Bulldog(TM) Drill Bit - 1/4" x 8 1/2"
Format 1/4x6"x8 1/2"
Details
Article #19835838
Screwdriver Bit icon-wishlist
EXCHANGE-A-BLADE
Screwdriver Bit
Format #2x6"
Details
Article #3459049
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
CONCRETE DRILL BIT is rated 4.3 out of 5 by 23.
Rated 5 out of 5 by from SDS Plus drill bit The SDS Plus drill bit worked flawlessly. This drill bit was very durable, I drilled numerous holes into a cement wall with no problems at all. I would recommend this product without hesitation
Date published: 2013-06-27
Rated 4 out of 5 by from One tough drill bit First off I rated this a 4 instead of 5 simply because the bit shank is designed for a Dewalt Hammer Drill. I had another brand with a standard chuck. I had to work with the bit to get it centered into my drill chuck and get it centered and spin true. Once I finally got that accomplished I was able to drill into my concrete slab as a pilot hole then switched to a 1/2 Dewalt Masonary bit to complete my project. I had to drill into some extremely hard concrete that had granite rocks mixed into the original pour. Not pushing this bit hard, it did what it was intended to do.
Date published: 2018-04-22
Rated 5 out of 5 by from Concrete drill bit This bit worked fine and great for placing holes in the walls for mounting things to rocks or concrete. It worked great and would definitely recommend.
Date published: 2014-05-18
Rated 3 out of 5 by from Not sturdy enough I bought it to drill 5 holes in a brick wall. after the 2nd hole it was ridiculous the amount of pressure I had to make for it to drill as far as the first two. By the end we just put the 4 since the 5th would have been impossible.
Date published: 2014-07-25
Rated 3 out of 5 by from Concrete yes; granite, no... Used this bit in a Bosch 1" SDS Plus Xtreme Bulldog rotary hammer, a very fine tool. This power tool was set on hammer, not drill. It punched right into the rock until the bit got stuck. After disengaging the tool, I was able to get it out of the rock in about 10 minutes with tapping in the sides to the shank. I then switched the setting to hammer drill, believing the continuous rotation would prevent it from getting stuck again. Even though I wasn't bearing down on the bit, just enough to engage the action, it simply rounded off the carbide. The tip actually looked like a hollow point bullet. Went back to Lowes and bought the Dewalt equivalent with a four point tip. it did the same thing eventually but snapped off the tip. Lesson learned: let the tool do all the work, just hold it in place... and be patient.
Date published: 2017-05-24
Rated 5 out of 5 by from Good product I'm generally happy with Bosch and this masonry bit didn't disappoint. Coupled with my Bosch rotary hammer drill this made easy work of drilling multiple holes in a concrete wall.
Date published: 2015-05-30
Rated 1 out of 5 by from Useless on Porcelain Tile Bought this because it advertised it could be used on Porcelain tile. Unfortunately, that was not the case. It took a half hour, at least, to get through the 1/4" tile using the recommended steady, moderate speed, and moderate pressure. More pressure and it warns of warpage. They need to remove porcelain tile from the recommended uses of this bit.
Date published: 2016-11-18
Rated 5 out of 5 by from Bosch 15" carbide-tipped masonry drill This is a very well made drill bit. It's designed for the Bosch SDS-Plus drill, but can be used in a conventional Jacob's chuck. A good hammer drill makes short work of drilling full-depth holes in concrete. Don't try drilling with a conventional (i.e. non-hammer) drill...it'll take you forever. [This review was collected as part of a promotion.]
Date published: 2019-10-19
  • y_2019, m_12, d_12, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_CA, sid_1983027, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT