
Description
Use this tile hole saw to drill in slate or ceramic tiles. This saw will allow you to make 1 3/8" holes with a variable speed drill. Its tungstene carbide particles will help you to easily cut your tiles.
Product specifications
Component
Tungsten carbide
Color
Black
Diameter
1 3/8" (3.5 cm)
Type
Ceramic tile hole saw
Utilization
Ceramic/slate
You may also like
Ceramic Tile Hole Saw - 1 3/8" is rated
out of
5 by
2.
Rated 1 out of
5
by
holely absent from
totally useless drill bit
Normally drilling a hole in tile takes a long time and is painfully slow. This drill never made it drilling the pilot hole through 2 complete battery charges, probably an hour or so of drilling. I applied water during the drilling to reduce the heat. I got half way through the tile and was generating no drilling dust, so that's as far as it was going to go.
Date published: 2019-11-17
Rated 1 out of
5
by
Guy 35 from
Not as advertised
Lasted for 3 holes the pilot bit was completely useless needed to use a different diamond bit to drill the pilot hole after the second hole the bit literally disintegrated
Date published: 2021-01-29