• icon-wishlist
  • icon-cart
Product selection from DREMEL

Carbide Flush Cut Blade 1 1/4"

Article #19165117 Model #MM485 Format 1 1/4"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

The Dremel multi-function carbide flush cutting blade is the first oscillating cutting blade with high-performance carbide teeth. Now users can cut hardwoods, nails, screws, stainless steel bolts, galvanized pipe, plaster & lathe, cement board, fiber board, sheet metal, slate, ceramic tile and more. Its wide 1-1/4” blade speeds through long cuts and can make plunge cuts up to 1-11/16” deep. Universal Quick-Fit(TM) system allows this blade to fit nearly every oscillating tool on the market.

You may also like

eco
Multi-Tool Wood Flush Cut Blade - 1 1/4"- 5-Pack - Industrial - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
Multi-Tool Wood Flush Cut Blade - 1 1/4"- 5-Pack - Industrial - Exchangeable
Format 1 1/4"xPK5
Details
Article #34595725
eco
EAB Tool HCS Flush Cut Blade for Wood - Professional Oscillating Accessory - 1 1/4" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool HCS Flush Cut Blade for Wood - Professional Oscillating Accessory - 1 1/4" - Exchangeable
Format 1 1/4x3.5"
Details
Article #34595673
eco
EAB Tool 4-Blade Starter Set - Professional Oscillating Accessory - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool 4-Blade Starter Set - Professional Oscillating Accessory - Exchangeable
Format 1 1/4"x2 3/4"xPK4
Details
Article #09065021
eco
EAB Tool HCS Speedy Flush Cut (Wood) - Professional Oscillating Accessory - 2 3/4" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool HCS Speedy Flush Cut (Wood) - Professional Oscillating Accessory - 2 3/4" - Exchangeable
Format 2 3/4x3 1/2"
Details
Article #34595676
eco
EAB Tool Bimetal Flush Cut Blade for Wood and Metal - Professional Oscillating Accessory - 1 1/4" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool Bimetal Flush Cut Blade for Wood and Metal - Professional Oscillating Accessory - 1 1/4" - Exchangeable
Format 1 1/4x3 1/2"
Details
Article #34595674
Flush Cut Blade 1 1/4" x 1/16" icon-wishlist
DREMEL MULTI-MAX
Flush Cut Blade 1 1/4" x 1/16"
Format 3/4x1/16"
Details
Article #19165100
eco
Wood/Metal Flush Cut Blade - 1 1/4" - 5-Pack - Industrial - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
Wood/Metal Flush Cut Blade - 1 1/4" - 5-Pack - Industrial - Exchangeable
Format 1 1/4"xPK5
Details
Article #34595736
"Zipbits" Drywall Bit icon-wishlist
ROTOZIP
"Zipbits" Drywall Bit
Format ST8
Details
Article #19165060
Hardwood blade icon-wishlist
DREMEL
Hardwood blade
Format 1 1/8"
Details
Article #19165088
eco
EAB Tool Hook and Loop Pad Professional Oscillating Accessory - 3" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool Hook and Loop Pad Professional Oscillating Accessory - 3" - Exchangeable
Format 3x3.5"
Details
Article #34595675
eco
EAB Tool 2 3/4" HCS Flush Cut (Wood) - Professional Oscillating Accessory - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool 2 3/4" HCS Flush Cut (Wood) - Professional Oscillating Accessory - Exchangeable
Format 2 3/4x3.5"
Details
Article #09065012
Wood and metal blade icon-wishlist
DREMEL
Wood and metal blade
Format 1 1/8"
Details
Article #19165070
CUT-OFF WHEEL icon-wishlist
DREMEL
CUT-OFF WHEEL
Format 1 1/4"
Details
Article #1916031
CUT-OFF WHEEL icon-wishlist
DREMEL
CUT-OFF WHEEL
Format 1 1/4"xPK/5
Details
Article #1916199
Drum Sander Band icon-wishlist
DREMEL
Drum Sander Band
Format 1/2"xGR60xPK6
Details
Article #1916027
Metal Flush Cut Blade 3/4" icon-wishlist
DREMEL
Metal Flush Cut Blade 3/4"
Format 3/4"xPK3
Details
Article #19165073
CUTTING BIT icon-wishlist
DREMEL
CUTTING BIT
Format 1/8XS1/8"
Details
Article #1916179
eco
EAB Tool Sandpaper Professional Oscillating Accessory - 3" x 60 Grit - 10/Pack icon-wishlist
EXCHANGE-A-BLADE
EAB Tool Sandpaper Professional Oscillating Accessory - 3" x 60 Grit - 10/Pack
Format 3x3 1/2"x60GT
Details
Article #34595678
eco
EAB Tool HCS Angled (Wood & Drywall) Professional Oscillating Accessory - 3 3/8" - Exchangeable icon-wishlist
EXCHANGE-A-BLADE
EAB Tool HCS Angled (Wood & Drywall) Professional Oscillating Accessory - 3 3/8" - Exchangeable
Format 3 3/8x3 1/2"
Details
Article #34595677
Rotary Tool Starter Kit icon-wishlist
DREMEL EZ LOCK
Rotary Tool Starter Kit
 
Details
Article #1916270
CUT-OFF WHEEL icon-wishlist
DREMEL EZ LOCK
CUT-OFF WHEEL
Format CR/5
Details
Article #1916271
BLADE icon-wishlist
DREMEL
BLADE
 
Details
Article #1916316
Sandpaper Set - Wood - 80-120-240 Grit - 6 Pieces icon-wishlist
DREMEL MULTI-MAX
Sandpaper Set - Wood - 80-120-240 Grit - 6 Pieces
Format 6PC
Details
Article #1916319
DRYWALL DRILL BIT icon-wishlist
ROTOZIP
DRYWALL DRILL BIT
Format 5/32"
Details
Article #1916285
GRINDING STONE icon-wishlist
DREMEL
GRINDING STONE
Format 3/8XS1/8"
Details
Article #1916044
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Carbide Flush Cut Blade 1 1/4" is rated 3.3 out of 5 by 79.
Rated 5 out of 5 by from Best blade yet! Have used to cut nails, bolts, PVC, wood, and it hasn't stopped yet.
Date published: 2015-04-29
Rated 5 out of 5 by from I'm repairing a studded wall where the studs were cut 29 inches from the top and pulled away leaving the old nails in place. i used this tool to cut the nails away with ease using my dremel tool.
Date published: 2013-12-09
Rated 1 out of 5 by from Carbide Oscillating Tool Blade The product stated that the carbide blade could be used to cut ceramic tile when in fact it on;y scratched the surface. I contacted Dremel and informed them of the quality and recommended they review their production acceptance standards.
Date published: 2013-06-11
Rated 1 out of 5 by from Quick wear I bought this for trimming steel golf shafts. After just a few small cuts, it was getting pretty dull. Not impressed. Off to buy a cut-off saw and diamond blade. Guess I'll just use my dremel for drywall and grout, etc.
Date published: 2014-02-26
Rated 1 out of 5 by from Blade doesn't do the job!! Very disappointing! I hoped that the problem was fixed and the blades now worked. NOPE ... I need to trim a 2" strip off the top of the wall tile in an alcove in the guest bath to allow for the new countertop and backsplash to be installed on the new sink base. Two blades later, I have barely scratched the surface of the tile (approx. 4ft worth). I then bought the Dremel saw which works great, except I can't get in the corners. Heading back to the store ... maybe another manufacturer has something that will work. Not a happy camper~!~ waste of time and money!
Date published: 2014-11-09
Rated 3 out of 5 by from Poor Carbide Quality I bought this to cut through three 5/8" dia threaded rod I am using as anchor bolts in concrete. The blade did the job, BUT when I was finished a close inspection of the blade showed that the teeth had worn down far more than on an HSS blade I used before for the same job. The carbide did not seem to stand-up that well. The cutting time was a bit shorter (HSS vs. Carbide), but the blade wear was excessive.
Date published: 2013-06-11
Rated 5 out of 5 by from Excellent Blade Although pricey, not sure yet how much life it has. Can quickly cut through steel in a hard-to-reach area, a real problem solver. It greatly increases the value and range of use of the Multi-Max tool!
Date published: 2014-06-24
Rated 3 out of 5 by from Ok, I might have used it wrong I got this because I thought it would got through nails and even though it did, I only got through three nails before the teeth were too dull to work. Way too expensive to only work three times, though I will say that I was rushing and pushing the multi-max. I think I will try it again and do what many people online said, let the multi-max do all the work.
Date published: 2013-11-06
Rated 2 out of 5 by from Did the (small) job, but This blade came in a kit I bought today. I just needed to cut the shaft of an M6 mounting bolt. It cut through this one small bolt, but the teeth were heavily worn afterward. I'm now weary of the other accessories' life spans. If this is the normal qlity of this carbide blade, I won't purchase another from this company.
Date published: 2015-08-16
Rated 1 out of 5 by from did not act like a carbide blade I purchased this carbide blade during our bathroom renovation. It stated that it was good for cutting harden metals. I used it to cut the length of a tube 1/32th thick. I am not sure of the metal but it was not copper or carbon steel. The teeth dulled before I was less than 10% finished. Its was only 1 inch diameter.
Date published: 2013-07-20
Rated 5 out of 5 by from Bathroom Renovation These blades are very time saving when renovating a bathroom, I removed everything down to the studs to find any damage, I removed the first layer of plywood flooring due to water damage in 2 spots. these blades helped cutting where other saws would not, great for cutting nails too
Date published: 2015-03-18
Rated 5 out of 5 by from Didnt fit I bought this not seeing there was different size mounting options on these saws. Returned without issue and got one of the correct size. Looks like it will work quite well on the saw it will fit on. [This review was collected as part of a promotion.]
Date published: 2019-07-19
Rated 1 out of 5 by from Dremel blade junk Carbide tip Dremel blade is junk used it on a couple cuts it dulled up never hit a nail only a little bit of plaster and wood
Date published: 2017-07-21
Rated 5 out of 5 by from Nail biter I needed a oscillating blade to cut the top of finished cabinetry for the installation of a electrical work box and to cut off nail heads to finish the project. Worked perfectly. [This review was collected as part of a promotion.]
Date published: 2019-03-30
Rated 1 out of 5 by from Not Worth It I purchased the first blade and it lasted roughly 10 minutes, thinking I just got a bad one I purchased a second blade and ended up with the same results. I love the Dremel but this blade doesn't work as advertised.
Date published: 2014-03-30
Rated 5 out of 5 by from Cuts great! Coupled with the Dremel multi purpose tool this blade cuts fast. [This review was collected as part of a promotion.]
Date published: 2019-03-06
Rated 2 out of 5 by from not worth the price Ok, so I rarely write reviews, but I felt this one was warranted. I purchased this bit to cut five galvanized screws that once attached my old countertop to the cabinets. The package clearly states this will cut hardened metal. It doesn't. I spent 3-4 minutes on each screw, applying varying amounts of pressure. The blade only cut about 1/3 of the way through each screw. I had to snap them off with a hammer. It does cut wood, as I nicked my cabinet. For the price, don't waste your money.
Date published: 2018-02-26
Rated 5 out of 5 by from Does the hard work! I am so grateful for my Dremel! I get the oscillating tool with the carbide blade a couple of years ago to take out a piece of galvanized pipe in my 80 YO house and after trying other things, it was the only thing that would fit in the tight place I had to work. Then today I had to remove the toilet in my bathroom and the only way was to cut through the bolts. Again it worked perfectly and with little effort, again in a very tight place. I honestly do not know what I would have done without this tool. Still struggling I guess.
Date published: 2017-09-01
Rated 1 out of 5 by from Will not last very long I bought this to cut two 1/4 bolts that were rusted in a tight spot so the multi-max was the tool to use. Had the right tool, but the blade struggled through the first bolt and was done, couldn't use it for the second bolt. Very disappointed, I can't understand why on the package it says "cuts hardened materials".
Date published: 2013-11-01
Rated 5 out of 5 by from Best Oscillating Tool Metal Blade Out There I went to into Lowe's on 9/6/2014 looking for a solution to cut rotted out galvanized drain pipe out of the wall to replace with pvc. I had pretty much resigned myself to purchasing a reciprocating saw or an angle grinder because I had tried metal blades on my oscillating tool before with no success. Thankfully the sales representative recommended this blade and I decided to try it before opening the $70 reciprocating saw and pack of blades I had just bought. Boy am I ever glad he did. For this type of project I hear no version of saw and blades works well - I didn't have the option of a chop saw or circular saw so I went with what I had. I needed to make three cuts. The one blade made all three and still has some life in it. I couldn't be happier. I also dipped it in water frequently to keep the blade cool. That may have extended the life. Also - in response to the other reviewers - I'm pretty sure the gold paint this thing is tipped with is not carbide. The teeth are made with carbide it isn't a coating.
Date published: 2014-09-08
Rated 1 out of 5 by from Waste of money I bought this blade because it claims to cut ceramic tile. Well it doesn't! I'm extremely disappointed with this product and a few other of the Dremel cutting accessories. They do not last more than a few cuts and cost way too much money! Save your money!
Date published: 2016-08-25
Rated 1 out of 5 by from overpriced JUNK I burnt up two other blades, different brand, on about twenty deck screws that were stripped that I didn't want to pull because it tears up the wood. I bought this to cut two last screws, it barely made it through the second screw. must be Chinese carbide.
Date published: 2018-06-06
Rated 1 out of 5 by from Failed :-( I used it for less than 20 minutes on and off on ceramic tiles but the carbide coating came off and blade became dull... was disappointed because I needed to do a cut out and would have been a wonderful tool to do it with... I use my Dremel for everything!
Date published: 2014-06-07
Rated 5 out of 5 by from Inside bathroom wall plumbing Had drain leak inside bathroom wall. Used the Carbide blade and it cut through tile like butter making repair easy and did far less damage. All plumbers should have one. Instead of a 8"x8" tile removal was able to cut hole 3 1/2" by 5" to do repair.
Date published: 2017-12-01
Rated 3 out of 5 by from Good concept - not as tough as thought should be. Nice idea. Carbide plating is tough in machine tools. Used to cut 2 1/4-20 bolts. Lost teeth 2/3 way through 1st screw. Was able to finish off second screw. Better value would have been 3 blade pack at same price of this clearance blade.
Date published: 2015-04-01
Rated 1 out of 5 by from Broke quickly cutting tile I bought this to cut tile for a small job because it was in the tile-cutting section at Lowes. It worked okay for a little while, but it broke pretty quickly. Now it is unusable. [This review was collected as part of a promotion.]
Date published: 2018-09-11
Rated 1 out of 5 by from Poor Quality The carbide coating has mostly come off half the blade after trimming five small cabinet-knob screws to a shorter length, approximately 1 minute of total cutting time on soft metal. I decided to pay extra for the carbide-coated blade, thinking it would last a long time; however, this was not the case. I do not recommend buying this product.
Date published: 2013-12-20
Rated 4 out of 5 by from Dremil Awesome This blade will cut thru just about any bolt you need to cut. quick and smooth. no issues with the blade itself. The price was around $20, kind of expnsive compared to competitor blade manufacturers.
Date published: 2013-11-11
Rated 1 out of 5 by from Disappointing Bought it just last night, used it for less than 20 minutes and it was done. NOT normal quality for Dremel - I love just about everything else I own from them, but this was just bad.
Date published: 2015-03-15
Rated 1 out of 5 by from Not a universal fit I don't know if this product works well or not. Package states Universal, but it does not fit the DeWalt DWE315. Just an FYI for anyone looking at this blade.
Date published: 2017-06-12
  • y_2020, m_8, d_14, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_79
  • loc_en_CA, sid_19165117, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT