• icon-wishlist
  • icon-cart
Product selection from SHARKBITE

Ball Valve - Brass - 3/4''

Article #41215045 Model #22186LFCA Format 3/4"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

This Sharkbite(TM) ball valve is the easiest way to install a new or replacement shut-off ball valve. It connects copper, CPVC and PEX pipe, without soldering, clamps, unions or glue. It is certified to 200 PSI and 93°C. with a CSA Listed.

Product specifications

Size
3/4'' (1.9 cm)
Component
Brass
Standards
CSA Listed
Gauge
200 PSI
Degree
93°

You may also like

1 1/2" ABS DWV Female Check Valve without Chimney icon-wishlist
IPEX HOMERITE
1 1/2" ABS DWV Female Check Valve without Chimney
Format 1 1/2"
Details
Article #00685530
3" ABS DWV Check Valve without Chimney icon-wishlist
IPEX HOMERITE
3" ABS DWV Check Valve without Chimney
Format 3"
Details
Article #00685533
2" ABS DWV Check Valve without Chimney icon-wishlist
IPEX HOMERITE
2" ABS DWV Check Valve without Chimney
Format 2"
Details
Article #00685531
4" ABS DWV Female Check Valve without Chimney icon-wishlist
IPEX HOMERITE
4" ABS DWV Female Check Valve without Chimney
Format 4"
Details
Article #00685532
1/2" Threaded Brass Swing Check Valve icon-wishlist
AQUA-DYNAMIC
1/2" Threaded Brass Swing Check Valve
Format 1/2"
Details
Article #01735389
3/4" Threaded Brass Swing Check Valve icon-wishlist
AQUA-DYNAMIC
3/4" Threaded Brass Swing Check Valve
Format 3/4"
Details
Article #01735390
Ball Valve - Push-to-connect - Brass - 1/2'' icon-wishlist
SHARKBITE
Ball Valve - Push-to-connect - Brass - 1/2''
Format 1/2"
Details
Article #41215044
Ball Valve Push-To-Connect - Brass - 3/4'' icon-wishlist
SHARKBITE
Ball Valve Push-To-Connect - Brass - 3/4''
Format 3/4"
Details
Article #41215046
Ball Valve - Female - Brass - 1/2'' icon-wishlist
SHARKBITE
Ball Valve - Female - Brass - 1/2''
Format 1/2"
Details
Article #41215047
1" Threaded Brass Swing Check Valve icon-wishlist
AQUA-DYNAMIC
1" Threaded Brass Swing Check Valve
Format 1"
Details
Article #01735391
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Ball Valve - Brass - 3/4'' is rated 3.2 out of 5 by 6.
Rated 2 out of 5 by from Not that easy These are not as easy as they say. Maybe it would have helped if there were some detailed instructions in the package. Even the internet instructions were not that great. You need a 'disconnect clip' to complete the installation and that is not mentioned. Also, I had to install this shut off valve on already installed pipe, which had no give at all. Very difficult. If it weren't for the help and physical strength of my daughter, I would still be fighting it. Took 3 hours and 2 ball valves since one got broken in the process. Once we got it in, all was good but.... not a walk in the park by any means.
Date published: 2018-05-26
Rated 1 out of 5 by from Why is it leaking Last summer I installed a 3/4 ball valve to my outside water. It worked fine. This year I opened it back up and water is squirting out. What happened
Date published: 2016-06-26
Rated 5 out of 5 by from End the frustration After a week of trying to repair an out of service plastic shut-off valve, my local hardware told me about the SharkBite. My old plastic supply lines were smaller than the standard replacement fittings. That frustrating week of trying to stop a leak around that old size pipe using hoarded old fittings, compression, first the purple stuff, then the glue, now tape...now putty...self made washer, o-rings almost drove me to insanity. When my rep told me that the SharkBite would adjust to my ID/OD with one push, guaranteed, it sounded too good to be true. IT WAS THAT EASY. Cutting off the section I'd been working on was the hardest part. The SharkBite simply pushed on and no leak. I was amazed and could not have been happier!!! It worked, it really, really worked with one push. No tape, no putty, no leak!!! Homeowner repairs made simple!!! I'm sure my local professional plumbers don't want me to talk about this, but I'm telling all the neighbors who have the outdated supply lines. Thank you for this product!!!
Date published: 2017-01-31
Rated 5 out of 5 by from QUICK, EASY, JOB DONE !! City is changing all water meters. Because of the 1 foot clearance it was harder to cut out and remove the old shut off tap, but install the ball valve 1 minute !! Always keep a few on hand for the unexpected leak!! [This review was collected as part of a promotion.]
Date published: 2017-07-27
Rated 5 out of 5 by from swap out old pipe for new Part of the copper pipe coming from my water heater corroded through. I used SharkBite connections for my new pipe installation. Easy Peasy! This product is so easy to work with and performs perfectly.
Date published: 2019-01-11
Rated 1 out of 5 by from HARD to remove! Bad product did NOT stop the water flow, just reduced the flow in the off position. And
Date published: 2016-07-18
  • y_2020, m_9, d_20, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_CA, sid_41215045, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT