Product selection from ACCLAIM LIGHTING

Add to wish list

Acclaim Lighting 2-Light White Aluminum Motion Activated Cast Floodlight

Article #330032568 Model #MFL1WH

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Add to wish list

Description

This 2-light floodlight is made of durable cast aluminum. With the 180 degree detection range, light automatically turn on when motion is detected. Motion sensitivity and time-duration are adjustable. This fixture mounts to a standard round junction box. Includes silicon gasket to protect from moisture.

Made of durable non-rusting powder-coated cast aluminum. All exposed hardware is stainless steel
Automatically turns on when motion is detected. Adjustable time and sensitivity settings
Requires 2 x PAR38 Medium-base light bulbs, equivalent to 150-Watt incandescent bulbs
Dusk to dawn light

Product specifications

Adjustable Detection Sensitivity

Yes

Adjustable Lamp Head

Yes

Bulb Type

Incandescent

Bulb(s) Included

Csa Safety Listing

Yes

Degree Of Motion Detection

180

Dual Detection Zone

Energy Star Certified

Etl Safety Listing

Yes

Color Family

White

Light Bulb Base Type

Medium base (E-26)

Manufacturer Color/finish

White

Material

Aluminum

Power Source

Hardwired

Recommended Light Bulb Shape

PAR38

Timer Included

Yes

Two-level Lighting

Ul Safety Listing

Warranty

1-year

Color Temperature (kelvins)

4000

Depth (in)

5.25

Detection Range (ft)

Height (in)

Lumens

3400

Number Of Light Heads

Package Quantity

Voltage

120

Wattage Equivalent

300

Width (in)

Can this unit use LED flood lights instead of the incandescent bulbs?

Asked by: Handychick

Acclaim Lighting 2-Light White Aluminum Motion Activated Cast Floodlight is rated 1.0 out of 5 by 1.

Rated 1 out of 5 by USNNole from Avoid these lights These are some very poor quality motion sensing lights. During installation, both housings broke. If you lay the unit on a table, right side up. It has four mounting holes. The hole at 10 o'clock (or the top left) is not to be used to secure the fixture to the junction box. Using my DeWalt 18v screw gun to install the housing to the junction box with the clutch set at 11 (out of 18) caused the top left screw to punch right through the thin aluminum. So, for the second light fixture, I set the clutch of the screw gun at 4! The clutch engaged numerous times while trying to put the other three screws in. But the top left hole collapsed just like the first light fixture. Then, no matter if you follow the manufacturer's "set up" directions, both motion sensing lights will only function as dusk to dawn spotlights. I want a refund!

Date published: 2013-03-29