• CART

    My Cart

    Online purchase is not available for this store.
    To check availability and to place an order, please contact your store.
  • List
  • Account

Make a wine rack

  • Difficulty Level: hammer hammer
    Close Difficulty Levels
    Beginner Do-It-Yourselfer - Easy
    Intermediate Do-It-Yourselfer - Moderate
    Experienced Do-It-Yourselfer - Difficult
    Professional - Expert
  • Cost Level:
    Close Cost Levels
    Cost comparable to current options
    Cost slightly more than the current options
    Cost high compared to current options
    Cost very high compared to current options
  • Completion Time : 4 Hours

Store your vintage wines within easy reach in a wine rack with a practical removable tray, painted to suit your kitchen decor. This is a compact and versatile rack, able to hold up to 25 bottles. Use it to decorate a part of the wall that might otherwise be bare.

This wine bottle storage rack measures 30½"H x 24"W x 11 ¾"D and includes a handy removable tray. The rack is made with MDF, which you should then paint to harmonize with your decor.


Tools and materials required


  • Mitre saw
  • Table saw
  • Router
  • Drill
  • Hole saw with 3" and 1 ½" blades
  • Pneumatic nailer
  • Pencil
  • Tape measure


  • 1 sheet MDF, 5/8" x 48" x 48"
  • 1 sheet hardboard (high-density fiberboard), 1/8" x 24" x 48"
  • 1 length pine, 1'' x 1'' x 96''
  • 1 ½" No. 8 screws
  • 18-gauge 1" finishing nails for nailer
  • Carpenter glue
  • Handles

Before Assembly


Élévation – support bouteille de vin










Notes on Routers

The router is a motorized tool that can be equipped with a variety of cutters, or bits, making it extremely versatile. Router bits exist for making mouldings, carving grooves (e.g. for inserting drawer bottoms or cabinet door panels), giving a more professional-looking finish to the edges of pieces of stock (boards, shelves, tables), planing surfaces and making dovetail joints. Router bits are often sold in sets, usually with illustrations of the patterns that they can cut.

Depending on the router model and type of work involved, the user either moves the router along the fixed material (e.g. to follow curves) or moves the material itself along a fixed router table (e.g. to carve grooves). A number of routers are designed to be used either way and can be fastened upside down under a router table.


Show All StepsClose All Steps

Helpful Information


See all Calculators

RONA Langdon Hardware Ltd. / Fort Erie

1238 Dominion Road, Fort Erie,
Ontario, L2A 1H7

Change store
Call your store
(289) 320-8250