The bathroom vanity is an integral part of any bathroom design.
While appearance remains a prime consideration, technical features are also important. Before you make your choice, learn as much as you can about various basin vanities, types of installation, materials to prioritize and the many options available to you. This Buyer’s Guide will enable you to familiarize yourself with the soon-to-be centrepiece of your new bathroom design.
Enhance your bathroom style with a basin vanity
UNDERSTAND YOUR NEEDS
Who mainly uses the bathroom?
How many people share the bathroom at the same time?
Where do you plan to locate the basin vanity?
What kind of visual aspect are you looking for?
Will you be incorporating Universal Design principals?
Although conventional cabinets are perfectly adequate for the bathroom, there are off-the-shelf basin vanities available you can install yourself. Generally smaller, they integrate well into bathrooms where space is at a premium. There are three configurations to choose from according to bathroom size, the space allocated for the basin vanity, and the number of people using the bathroom.
Wall or pedestal mount basins
This suits a bathroom with very limited space. There is no storage space included.
Single basin vanity
This should be your first choice when space allows. As well as providing storage, it conceals the plumbing.
Double basin vanity
This is the ideal solution when a family must share the same bathroom. More than one person at a time can use it, which is a time-saver. Double the storage space.
Both single and double vanities are separated into three categories:
- Standard basin vanities are set directly on the floor in the bathroom.
- Basin vanities with legs are desk-like and harmonize well with all decor styles.
- Wall mount basin vanities have no contact with the floor and enable an ‘airy’ bathroom design.
It is possible to choose the height of your basin vanity to suit those who will be using it.
Basin vanities installed at a height lower than 34" are more accessible for children, people of below-average height and people in wheel chairs. A 36" basin vanity is preferable for people of average or above-average height.
Framed basin vanity cabinets incorporate a ‘frame’ around the front outer edge of the cabinet box, of the same material as the drawers and doors. The face frame provides some rigidity to the cabinet box, helping it to remain square and sturdy. Here, the hinges are exposed, installed directly on the frame. These vanities harmonize well with traditional decors and doors can easily be replaced.
Frameless basin vanity cabinets offer a bit more accessibility because there’s no inside edge of a frame partially blocking the perimeter of the vanity opening. The sides are generally thicker to improve stability. Hinges are installed directly on the lateral panels, increasing the amount of storage space.
The material you choose for your basin vanity will largely determine its durability, as well as influencing the style of your bathroom. It is inevitable: dampness will always be a problem in bathrooms, a problem some materials can withstand better than others. It would be wise to choose waterproof materials, such as exotic wood species (teak or wenge wood, for example) or wood veneers. Simple particle board and MDF should be avoided.
The most popular wood species:
Vulnerable to humidity
A thin sheet of wood glued to a plywood base.
Less expensive than solid wood
Less scratch-resistant than solid wood
Melamine resin is used to laminate decorative paper onto a sheet of particle board.
Large selection of colours and patterns available
Many sheets of paper layered and soaked in melamine resin then subjected to high heat and pressure for hardening.
Much more resistant than melamine
More expensive than melamine
Lacquer is a high resin and hot solvent-based finish applied over an MDF (pine fibre) panel.
Sculpted designs are possible
Panels are pinewood fibres covered with a sheet of PVC, or thermoplastic.
More resistant than laminates and melamine
More expensive than laminates
Although the visual style you’re looking for is very important, you shouldn’t neglect the storage aspect. The basin vanity can include drawers, doors, or a combination of both. Certain vanities have only one shelf.
For people with limited mobility, drawers are preferable for free and easy access to contents. Drawers are useful for storing beauty products and accessories, but inadequate for holding household cleaning products; for this, doors become necessary. A combination of drawers and doors maximizes your storage possibilities. After you determine your needs, it’s simply a question of style.
As with a console cabinet, vanities with a single shelf, without drawers or door, are useful for setting decorative objects but offer very little storage space. They may be better suited to a powder room.
4. Handles, knobs and pulls
Handles, knobs and pulls provide the finishing touches to the bathroom style you have chosen. Although viewed as purely decorative, they have a very important function: to enable you to open your vanity drawers and doors.
- Handles are attached with two screws. Available in many styles, they harmonize with all kinds of decors. Ergonomically-designed handles are easy to use and correspond with the design principles for people with limited mobility or people suffering from arthritis.
- Knobs are attached with a single screw. They have decorative appeal, harmonize well with the smallest vanities, and suit all users.
- Pulls are loosely jointed handles, at home in more luxurious decors. Signs of wear will appear over time where the pull rests against the door or drawer front, those made of wood in particular.
5. Door hinges
You have a variety of hinges to choose from according to the type of basin vanity. Ant-slam safety hinges are a wise choice if there are children in the household.
- Exposed or semi-concealed hinges have two wings and a pivot-point knuckle. They are completely or partially visible when the vanity door is closed.
- Concealed hinges, also known as ‘hidden’ hinges, cannot be seen when the vanity door is closed; primarily functional, most are adjustable.
- Mortise hinges sit flush with the door and frame when installed; a notch is cut into the vanity frame to install the wings.
- Non-mortise hinges do not require any chiselling in the vanity frame; the wings are simply attached to the surface of the cabinet.
- Door swing hinges provide the maximum amount of cabinet door opening for complete access to the inside of the vanity.
6. Drawer slides (slide rails)
Drawers rest on slides installed within the vanity. Ease of opening and the extent to which drawers can be opened is determined by the slide rails. Full extension drawer slides permit better access to drawer contents, compared to partial extension slides. Some manufacturers propose “soft-close” slides which slow down the mechanism, making it possible to close a drawer more gently. Also referred to as “anti-slam” buffers, they can be useful for people in the habit of slamming drawers shut.
Slide rails can support a load from 75 lb. to 100 lb., which more than meets the needs for bathroom storage space.
- Ball bearing drawer slides are located on each side of the drawer. They are stable, simple and durable.
- Under mount drawer slides are fully concealed and allow a lot of weight. They provide excellent support and stability.
- Side mount drawer slides although solid, provide more limited access to drawer contents.
Certain basin vanities are already equipped with a natural stone, synthetic material, laminate, glass or even quartz counter. For vanities without a counter, other coverings can be added such as wood and ceramic tiles. Each covering carries with it certain benefits and drawbacks to consider, such as installation techniques and match with the vanity basin model. One of the selection criteria to take into account is the available counter space around the lavatory basin. Certain counters are equipped with a backsplash, which as well as enhancing the visual style of the cabinet prevents water from dripping down the wall behind the counter.
|Materials||Benefits||Drawbacks||Type of Lavatory Basin|
Natural stone (Granite, marble, slate, etc.)
Most natural stone vanity tops require the application of a sealant
Synthetic materials (acrylic, polyester and aggregates)
Offered in a wide selection of colours
Damaged surfaces are more difficult to repair
Tiles (glass, porcelain, ceramic, etc.)
Large choice of colours and patterns
Tile joints collect dirt easily
Vulnerable to moisture and humidity
Fingerprints show up very easily
Requires less maintenance than natural stone
8. Lavatory basin
Several vanity models enable the installation of a vanity top and integrated sink. In this construction, the basin is made from the same material as the counter top, forming one easy-to-install unit. If your vanity does not include a basin, you should learn about the various basins and installation techniques available in order to make an informed decision.
- Drop-in basin: sits enclosed within the vanity unit. The rim of the basin overlaps part of the vanity counter surface.
- Under-counter basin: sits underneath the top of the vanity for a flush finish.
- Above-counter basin (vessel): resembles a bowl placed on the counter.
Certain vanities come with integrated faucets. If not, you need to choose your faucets according to the number of holes in the basin and counter. It may be possible to drill an opening in the counter where you need one; this depends on the counter material. Wall- mount faucets are also an option.
The installation of a basin vanity is easy to complete for the amateur do-it-yourselfer. A few hours and some basic tools are sufficient to get the job done. Two people may be required, however, to handle the vanity, depending on the weight of the vanity and counter.
Before you begin, close off the water supply and mark the location of the basin vanity and wall studs. The plumbing should ideally be positioned in the center of the vanity. Check that the back panel has an opening for the plumbing. If not, use a hole saw to make the openings where you need them.
Attach the basin vanity to the wall to secure it solidly in place. It is simpler to install the basin and faucets on the counter before placing it on the vanity. Connect the plumbing and run a bead of silicone caulk between the wall and the counter to ensure that it is watertight.
A number of accessories can embellish your basin vanity, and by extension, your bathroom. These are:
- Medicine cabinet: this remains a very useful addition to any bathroom. Built-in or not, single or double, the medicine cabinet provides essential storage space for the whole family.
- Mirror: aside from its primary function, a mirror will make the room seem much larger. Thick mirrors are preferable to thin ones, since there will not be any distortion of the surfaces it reflects. If the bathroom is used by the whole family, it might be wise to install two mirrors rather than just one.
- Light fixtures: in addition to providing light, select your light fixtures to enhance your decor.
Related projects and Guides
Finish drywall joints
Beautifully finished drywall forms the backdrop for all the home furnishings and decorations such as colour, mouldings, furniture and window coverings...Learn more
Install a PVC gutter
Gutters protect your home from heavy rain and snowfall by ensuring that rainwater is evacuated away from the foundations. Your home is therefore dri...Learn more
Install drywall panels
Installing drywall on the ceiling or the wall can be done by most do-it-yourselfers using ½" or 5/8" drywall panels. It requires mini...Learn more
Install asphalt shingles
The new generation of asphalt shingles will not only improve the look of any roof but are long-lasting and easier to install than the old three-tab mo...Learn more