• icon-wishlist
  • icon-cart
Product selection from SQUARE D

60A Square D Generator Panel with 18 Spaces/36 Circuits

Article #02655109 Model #QOGP3P6036 Format 60A-36CC-120/240V
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

The Square D generator panels allows you to permanently connect a standby power source to specific circuits, such as lighting, heating, refrigerator, freezer, and sump pump. You can easily switch the power supply to branch circuits by turning off the utility main breaker and turning on the main breakers connected to the generator. For added safety, an easy to use rotating interlock bracket allows only one main breaker to be on the "ON" position at the same time. Ideally suited for residential, rural, commercial applications requiring a quick and easy switch over from utility power to standby generator power. Large circuit breaker capacity. Accepts up to 18 standard or 36 QO tandem circuits. Includes two factory installed 60A 3 pole main breakers. Ease of use from our patented rotating interlock bracket design. Manually switch from utility power to stand-by generator power in seconds. Suitable for generators having either bonded or unbonded neutral conductors.

You may also like

60A Air Conditioner Disconnect icon-wishlist
SQUARE D
60A Air Conditioner Disconnect
Format 60A
Details
Article #02655079
240 VAC 100 A EQL Load Center Single Phase and 3 Wires icon-wishlist
SIEMENS
240 VAC 100 A EQL Load Center Single Phase and 3 Wires
Format 100AM
Details
Article #2263011
Panel - 100 A - 8/16 Circuit "Siemens" Electric Panel icon-wishlist
SIEMENS
Panel - 100 A - 8/16 Circuit "Siemens" Electric Panel
Format 100AM
Details
Article #2263012
Outdoor Circuit Panel - 4/8 - 125V 120/240 V icon-wishlist
SIEMENS
Outdoor Circuit Panel - 4/8 - 125V 120/240 V
Format 125AM 4/8
Details
Article #88665019
240 VAC 60 A EQL Load Center Single Phase and 3 Wires icon-wishlist
SIEMENS
240 VAC 60 A EQL Load Center Single Phase and 3 Wires
Format 60AM
Details
Article #2263010
100A 8 Spaces/15 Circuit QO Sub Panel icon-wishlist
SCHNEIDER ELECTRIC
100A 8 Spaces/15 Circuit QO Sub Panel
Format 100Ax3Wx120/240V
Details
Article #02655003
Electric Panel for Spa icon-wishlist
SIEMENS
Electric Panel for Spa
Format 125A-120/240V
Details
Article #88665004
50-a QO Hot Tub/Pool/Spa Pack icon-wishlist
SQUARE D
50-a QO Hot Tub/Pool/Spa Pack
Format 50Ax2 CIRCUI
Details
Article #0265087
240 VAC 60A Service Entrance Load Center Single Phase/3-Wire icon-wishlist
SIEMENS
240 VAC 60A Service Entrance Load Center Single Phase/3-Wire
Format 60A 120/240V
Details
Article #88665001
Electrical Panel with Main Breaker - 60A/32 - 240 V icon-wishlist
SQUARE D
Electrical Panel with Main Breaker - 60A/32 - 240 V
Format 60AM
Details
Article #02655136
100A 4 Spaces/8 Circuit QO Sub Panel icon-wishlist
SQUARE D
100A 4 Spaces/8 Circuit QO Sub Panel
Format 100AX120/240V
Details
Article #0265035
8/16 Main Circuit Breaker icon-wishlist
CUTLER-HAMMER
8/16 Main Circuit Breaker
Format 100Ax8/16CIRC
Details
Article #1334032
6-Circuits Breaker Box icon-wishlist
SQUARE D
6-Circuits Breaker Box
Format 100AX120/240V
Details
Article #0265036
70-A 2 circuits QO Sub Panel icon-wishlist
SQUARE D
70-A 2 circuits QO Sub Panel
Format 70A
Details
Article #0265037
Electrical Panel with Main Breaker - 100A/24 - 240 V icon-wishlist
SQUARE D
Electrical Panel with Main Breaker - 100A/24 - 240 V
Format 100AM
Details
Article #02655137
200A 40 Spaces/80 Circuit QO Panel Package with Breakers icon-wishlist
SQUARE D
200A 40 Spaces/80 Circuit QO Panel Package with Breakers
Format 200Ax40CIRC
Details
Article #0265061
120/240 VAC 125 A CPL Load Center Single Phase and 3 Wires icon-wishlist
CUTLER-HAMMER
120/240 VAC 125 A CPL Load Center Single Phase and 3 Wires
Format 100Ax4/8CIRC.
Details
Article #1334031
Load Centre Main Lugs - 12 to 24 Circuits - 125A/240V - Grey icon-wishlist
SIEMENS
Load Centre Main Lugs - 12 to 24 Circuits - 125A/240V - Grey
Format 125AM-12/24
Details
Article #22635052
Square D(TM) Circuit Breaker Box - 12 Spaces/24 Circuits icon-wishlist
SQUARE D
Square D(TM) Circuit Breaker Box - 12 Spaces/24 Circuits
 
Details
Article #02655138
100A 24 Spaces/48 Circuit QO Panel Package icon-wishlist
SQUARE D
100A 24 Spaces/48 Circuit QO Panel Package
Format 100A
Details
Article #0265060
Load Center - Single Phase - 70A - 120/240 VCA icon-wishlist
SCHNEIDER ELECTRIC
Load Center - Single Phase - 70A - 120/240 VCA
Format 70AM
Details
Article #02655070
Main Panel + Breaker X-Press Pack  -  24/48 Circuits - 100 A icon-wishlist
SIEMENS
Main Panel + Breaker X-Press Pack - 24/48 Circuits - 100 A
Format 100-24/48
Details
Article #22635045
30A Square D Generator Panel with 18 Spaces/36 Circuits icon-wishlist
SQUARE D
30A Square D Generator Panel with 18 Spaces/36 Circuits
Format 30A-36CC-120/240V
Details
Article #02655108
Eaton Loadcentre - 20/40 - 100 A - 120/240 V - White icon-wishlist
EATON
Eaton Loadcentre - 20/40 - 100 A - 120/240 V - White
Format 100AM 20/40
Details
Article #13345179
120 - 240 V 100 A Main Breaker Load Center Aluminum / Copper icon-wishlist
SIEMENS
120 - 240 V 100 A Main Breaker Load Center Aluminum / Copper
Format 100AM-32/64
Details
Article #2263024

After using this panel , do we still need to run grounding conductor for generator ?

Asked by: Gary01
Hi, if a generator is used in conjunction with this generator panel to supply power to a structure, then it must be connected to a grounding electrode system such as grounding rod. This panel uses 2, 3 pole breakers to transfer power from the utility to the generator. The 3 pole breaker switches the two lines and the neutral connection to prevent backfeeding, as the interlock prevents both breakers to be "on" at the same time.
Answered by: Square D Product Expert
Date published: 2019-03-15

If I wanted to supply an off the grid cabin. One side would be a manually started generator and the other side would be a solar system both under 60A,240V. Would this unit work and would I need a separate main panel if everything was in this panel?

Asked by: CaseyCasey
Hi, this panel has two, 3 pole breakers to switch power from two sources. Each breaker has L1(line 1), L2(line 2),and N(neutral) with an notched circle interlock in between, so that only one breaker can be tuned on at a time to feed power to the breakers in the panel. Each source of power has to feed the Generator panel with two hots, neutral and a ground. Two sources of power to the general panel are a stand by generator and another panel (usually the main panel) because the breakers in the Generator Panel feed devices that you want backed up at the time of power loss. On other words, the devices you want backup in your house are feed solely from the generator panel. When there is no power loss, the Generator Panel acts like a sub panel. If there is a power loss, then you manually switch the breakers, so that the standby generator now provides power to the panel.
Answered by: Square D Product Expert
Date published: 2019-01-31

Does this include the individual breakers for each connection?  Other than the 2-30 amp

Asked by: Trentmac
Hi, the branch breakers are to be purchased separately. Also note that this includes 2, 60A breakers. There is another version (QOGP3P3036) that includes 2, 30A breakers.
Answered by: Square D Product Expert
Date published: 2018-12-19

So as long as the wire is rated for 60A I am ok to put a 50A or 30A inlet?  I have not been able to find any reference to this being OK anywhere.

Asked by: Mikey1224
This is a 60A generator panel. You see two 3P 60A breakers in the generator panel. These two breakers do not trip, their purpose is to manually switch power from one source to another. Your wire matches the source. For example, if you have a 40A double pole breaker in your service entrance panel feeding the generator panel, your wire matches the 40A double pole breaker.
Answered by: Square D Product Expert
Date published: 2018-12-27

If this panel comes with a 60A 3 pole breaker for the generator, can it be connected to a CS6365 inlet box rated for 50A? If not then why bother providing this breaker? I would have to spend another $80 to get a 50A 3 pole breaker to match CS6365 inlet.

Asked by: Mikey1224
Hi, as a review the generator panel has two 3 pole breakers. One 3P 60A breaker is feed from the service entrance panel with a double pole breaker 60A or less. The generator panel is home to all critial loads in the house that you want to back up in case of a power failure such as the HVAC, select applicances, some lighting etc. This breaker is in the "on" postion most of the time. The second 60A breaker is hardwired directly to a 60A or less inlet box. When there is a power failure, you switch the 3P breaker feeding the service entrance panel to the "Off" position. That enables you to turn the round dial in the middle 180 degrees, so you can turn the 60A breaker feeding the inlet box to the "On" position. Plug your generator to the outside inlet box. Now, the generator will feed power to the breakers in the generator panel, and there is no backfeeding of power back to the grid. The two main breakers in the generator panel are acting as a manual transfer switch.
Answered by: Square D Product Expert
Date published: 2019-02-25

Dose it do 220v ?

Asked by: Macky1314
Yes, you can install 2-pole breakers to supply 240V loads. However, your generator must have the capacity to power the 240V load, i.e. sufficient wattage.
Answered by: DavidT
Date published: 2017-02-27

Hi all dose this  box do 240v  it says that it's  a shame pull?

Asked by: Macky1314
The Square D Generator Panel is 120/240V. The generator panel is connected (60A) to your service entrance panel via a double pole 60A breaker. The Generator panel consists of 2 - 3 pole 60A breakers. One breaker is connected to the serive entrance panel, while the 2nd breaker is connected to an outside receptacle that is connected to your generator. The rotating interlock allows you to transfer power from the utility to your generator. The rotating interlock only allows one of the breakers to be one at a time. (that is needed because you don't want to backfeed power back the grid from your generator) In the generator panel you put breakers that feed your critical loads that you want on when the power goes out. Hence you can put single and double pole breakers in the generator panel.
Answered by: Square D Product Expert
Date published: 2018-12-12

Pourquoi continuer à m’envoyer des notification pour un panneau Square D de 60 Amp quand aucun de vos magasins qui ferme en on pas en stock.

Asked by: Bob47
  • y_2020, m_7, d_14, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_CA, sid_02655109, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
60A Square D Generator Panel with 18 Spaces/36 Circuits is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Square D Generator panel Great service + quick delivery !! Easy to install, exactly what I need
Date published: 2017-09-15
Rated 5 out of 5 by from Easy Panel to use I have just installed this panel and it was an easy install
Date published: 2017-02-28
  • y_2020, m_7, d_14, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_CA, sid_02655109, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT