• icon-wishlist
  • icon-cart
Details
Product selection from BOSTITCH

2-in-1 Pneumatic Flooring Tool - Staples/Nails 1 1/2"-2"

Article #00276202 Model #BTFP12569
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

2-in-1 Pneumatic Flooring Tool - Staples/Nails 1 1/2"-2"

icon-wishlist

Description

This Bostitch pneumatic flooring tool drives 15 1/2 gauge staples and 16 gauge L-shape cleat nails into 1 1/2-inch to 2-inch long flooring to give you twice the performance. It uses mallet actuated pneumatic driving action with a sequential firing for optimized operation. The flooring tool has low air requirements and features tool-free jam clearing. The ergonomic design, long handle, comfortable grip and lightweight design ensures its easy to use and reduces fatigue. It includes non-marring interchangeable base plates for use with 1/2-inch to 3/4-inch flooring.

Product specifications

Gauge
15 1/2 GA and 16 GA
Type
2-in-1 pneumatic flooring tool
Style
2-in-1
Component
Metal
Color
Orange/grey
Magazine Angle
Angled
Height
8 1/4" (20.95 cm)
Width
3" (7.62 cm)
Length
10 1/8" (25.73 cm)
Air Flow
3.7 CFM required
Air Inlet
1/4"
Quantity per Box
1 unit
Magazine Capacity
100
Jam Clearing
Tool free
Depth Setting
Adjustable
Pressure
70-120 PSI
Fastener Type
Staples and cleat nails
Fastener Length
Staples and L-shape cleat nails from 1 1/2" to 2" (3.81 cm - 5.08 cm)
Included
Tool mallet, air fitting, on-marring, interchangeable base plates for 1/2" through 3/4" flooring
Packaging
Each

Frequently bought together

Air Compressor - 8 Gal - Horizontal - 1.8 HP - 150 PSI icon-wishlist
CAMPBELL HAUSFELD
Air Compressor - 8 Gal - Horizontal - 1.8 HP - 150 PSI
Format 8GAx1.8HP
Details
Article #73455219
Lubricant for Pneumatic Tools icon-wishlist
CAMPBELL HAUSFELD
Lubricant for Pneumatic Tools
Format 8OZ
Details
Article #7345065
Coupler and Plug Set icon-wishlist
CAMPBELL HAUSFELD
Coupler and Plug Set
Format 4PC
Details
Article #7345028
icon-wishlist
RCR
"Contractor" Air Hose
Format 3/8"x50'
Details
Article #0412763
Tire Inflator with Gauge icon-wishlist
CAMPBELL HAUSFELD
Tire Inflator with Gauge
Format 10-100LB
Details
Article #73455195
Crown Flooring Staples - 2 icon-wishlist
BOSTITCH
Crown Flooring Staples - 2" - 15.5 GA - 7700 Box
Format 2"X15GXBX/7700
Details
Article #02775015
20-Piece Air Compressor Accessory Kit icon-wishlist
CAMPBELL HAUSFELD
20-Piece Air Compressor Accessory Kit
Format 20PC
Details
Article #73455233
Vertical Air Compressor - 60-Gallon - 3.7 HP icon-wishlist
CAMPBELL HAUSFELD
Vertical Air Compressor - 60-Gallon - 3.7 HP
Format 60GAx3.7HP
Details
Article #73455238
icon-wishlist
CAMPBELL HAUSFELD
"Quiet Series" Electric Air Compressor - 8 Gal. - 1.0 HP
Format 8GAx1HP
Details
Article #73455217
Air Compressor Nylon Recoil Hose - 25' icon-wishlist
CAMPBELL HAUSFELD
Air Compressor Nylon Recoil Hose - 25'
Format 1/4"x25'
Details
Article #73455178
17-Accessory Set icon-wishlist
CAMPBELL HAUSFELD
17-Accessory Set
Format 17PC
Details
Article #7345027
icon-wishlist
RCR
"Contractor" Air Hose
Format 3/8"x25'
Details
Article #0412762
Safety glasses icon-wishlist
DEGIL SAFETY
Safety glasses
 
Details
Article #86575158
Safety Flex Goggle icon-wishlist
DEGIL SAFETY
Safety Flex Goggle
 
Details
Article #8657090
Pistol Grip Blow Gun icon-wishlist
CAMPBELL HAUSFELD
Pistol Grip Blow Gun
 
Details
Article #7345042
Ball Foot Chuck - 1/4 icon-wishlist
CAMPBELL HAUSFELD
Ball Foot Chuck - 1/4" Female NPT
Format 1/4"
Details
Article #73455205

You may also like

Pneumatic Stapler icon-wishlist
SENCO
Pneumatic Stapler
Format 16-17GA
Details
Article #10595002
Finishing Stapler - 18-gauge - 1/4 icon-wishlist
METABO HPT
Finishing Stapler - 18-gauge - 1/4" x 1/2" to 1 1/2"
Format 1/2-1 1/2"x18GA
Details
Article #37815177
Pneumatic Framing Nailer 325XP icon-wishlist
SENCO
Pneumatic Framing Nailer 325XP
Format 34DGx2-3 1/4"
Details
Article #10595004
Hardwood Flooring Stapler Kit icon-wishlist
BOSTITCH
Hardwood Flooring Stapler Kit
Format 1 1/2@2"
Details
Article #0277017
15° Coil Roofing Nailer icon-wishlist
BOSTITCH
15° Coil Roofing Nailer
 
Details
Article #0277039
Bulldog Pneumatic Roofing Nailer - 3/4 icon-wishlist
BOSTITCH
Bulldog Pneumatic Roofing Nailer - 3/4 " to 1 3/4"
Format 3/4-1 3/4"
Details
Article #00276201
Pneumatic Coil Roofing Nailer - 7/8 icon-wishlist
METABO HPT
Pneumatic Coil Roofing Nailer - 7/8"-1 3/4" - 16°
Format 7/8-1 3/4"x16DG
Details
Article #37815178
Finishing Nailer icon-wishlist
SENCO
Finishing Nailer
Format 18GAx5/8-2 1/8"
Details
Article #10595005
Coil Roofing Nailer - Plastic/Aluminum - 3/4-1 3/4 icon-wishlist
SENCO
Coil Roofing Nailer - Plastic/Aluminum - 3/4-1 3/4"
Format 3/4-1 3/4"
Details
Article #10595040
2-in-1 Brad Nailer Kit icon-wishlist
BOSTITCH
2-in-1 Brad Nailer Kit
 
Details
Article #0277040
Pneumatic Staple 120 PSI - T50 icon-wishlist
ARROW
Pneumatic Staple 120 PSI - T50
 
Details
Article #00125088
Roundhead Framing Pneumatic Nailer - 16° icon-wishlist
METABO HPT
Roundhead Framing Pneumatic Nailer - 16°
Format 1 3/4-3 1/2"x16DG
Details
Article #37815179
Stapler - 1 1/2-In. Brad Stapler icon-wishlist
BOSTITCH
Stapler - 1 1/2-In. Brad Stapler
Format 18GAx1 1/2"
Details
Article #0277088
Construction Stapler, Standard Crown, 7/16 icon-wishlist
HITACHI
Construction Stapler, Standard Crown, 7/16"
Format 7/16-2"x16GA
Details
Article #37815087
Palm Nailer icon-wishlist
PASLODE
Palm Nailer
 
Details
Article #22935167
Nailer - Framing Coil Nailer icon-wishlist
PASLODE
Nailer - Framing Coil Nailer
Format 2-3 1/4"x30DG
Details
Article #2293057
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
2-in-1 Pneumatic Flooring Tool - Staples/Nails 1 1/2"-2" is rated 4.4 out of 5 by 61.
Rated 4 out of 5 by from Time saver for an old guy I had to replace a few tongue & groove boards on my porch. In the past I have rented nailers with poor time consuming results. I found this Bostitch nailer which is identical to the Dewalt nailer with the same model #. I have only shot 50 or so nails through it but I can say it makes the job so much easier. I was nailing 5/4 tongue & groove Douglas Fir. I shot the nails with no plastic base plate installed so the nails would go through the top of the tongue. No problems just don't hit too hard. I have a lot of 3/4 Oak flooring to put down this winter. Hopefully the nailer continues to give great results. I have no reason to think it won't.
Date published: 2015-10-09
Rated 5 out of 5 by from Bought this to install 3/4" oak in my second floor and it worked great. I bought vs rent because for the price, you break even at about 1 week of rental. Super simple tool, just oiled daily and had no problems other than user error for the entire project. If I had to do a floor again, I'd buy this in a heartbeat. FYI, I used the Bostitch pancake compressor with the 3 tools. It supplied enough air overall, but had to run a lot when I really got going on a run. I also used the 2" L-shaped cleats which worked very well.
Date published: 2015-08-28
Rated 5 out of 5 by from Bostitch nailer works perfectly I am halfway through finishing the main floor of my home (about 1000 sqaure feet so far) and the nailer has worked perfectly. No jams, no misfires; nothing. It has worked perfectly. I am using the 2 inch nails; not the staples and am having great luck so far. Buy this product with confidence.
Date published: 2016-01-21
Rated 5 out of 5 by from Great/Tool I purchased this tool to install 3/4 in maple hardwood floors. I used my military discount to buy this tool. Great Price. I like this tool b\c it uses either cleats or staples. I placed a 200 sq ft room and had NO problems with this tool. It worked well with no mis fires and placed 1500 cleats. I oiled it dailt b\f use. I also liked that the tool came with several face plates for differrent types of flooring thickness.
Date published: 2016-12-30
Rated 5 out of 5 by from Time saver The pneumatic nailer has been a great time saver. After nailing the first few rows of hardwood using an air gun nailer, switching to this stapler nailer has made the process much easier. I have to advise hitting the plunger with consistent force to ensure the staples are completely recessed above the tongue of the board. Otherwise it's difficult to remove the 2" staple without damaging the hardwood. Also too much pressure can cause splitting. Overall, we've really enjoyed using it.
Date published: 2015-11-25
Rated 4 out of 5 by from Be careful with engineered woods I bought this nailer after much research to install a 1/2" engineered bamboo floor. At first I started with 2" staples as that is what the floor manufacturer recommended, but quickly discovered that staples would not work as none would seat correctly. It was consistent that one side of the staple would either curl, or crumple. I tried adjusting the air regulation but to no avail. I'm not sure if this problem was due to the nailer or because of the density of the engineered bamboo. I switched over to L Cleats and had almost 100% success rate in seating for 800 square feet of flooring and about 2000 cleats. I put in a few drops of the supplied oil after every 8 hours of usage and have not had any issues. You will not be able to use this nailer on the beginning strip against a wall or the last two strips against a wall. So, either be ready to mess with some glue, or look at buying a finishing nailer to take care of those areas. Good luck!
Date published: 2017-01-09
Rated 5 out of 5 by from Great tool I purchased this nailer to install solid hickory flooring. Although I had read reports of splintered tongues, I had no trouble using the 2 inch cleats. I experienced one minor jam in thousands of cycles. The issue was easy to resolve and might have been caused by a defective cleat. Generally, this tool provides a very consistent fastener application and does a great job pulling in warps. It is easy to load and no special skill is required o operate it. This is a well made and very robust tool that should hold up over many years.
Date published: 2017-04-03
Rated 2 out of 5 by from Impossible to clear jammed staples. I bought this nailer couple days ago and I started using right after. With little poking around I got it to work ok until I git the nail in my subfloor as it is invisible to me. Nailer jamed. I was using staples and one of the staples broke and stucked inside the nailer. I removed the three screws and I saw the broken staple stucked in the tonge. I looked around there is no easy way to clear this unless I completely take the nailer apart. Very poor design. I lost half a day work time beacause of this gun. It is going back to lowes to be send to manufacturer let them clear the jam. Shoes deliver to be used different kind of wood is not accurete hight. I had to use 1/2 " shoe for 5/8" hardwood floor. I am going to try different nailer tomorrow.
Date published: 2017-11-15
  • y_2019, m_6, d_16, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_61
  • loc_en_CA, sid_00276202, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT