Installing a programmable thermostat

Using a programmable thermostat offers numerous benefits. Among other things, it reduces energy consumption by turning down the heat when no one is home.
Difficulty level :
Tools list
Material list
Project guide service
Related Projects
Related Tips
Page 1/2
Usage
1. Choose a thermostat location
2. Mark holes for the anchors
3. Insert the anchors
4. Fasten the plate
5. Connecting the thermostat
6. Close the thermostat
7. Verify proper operation

Usage

However, the use of such a device is not limited to heating equipment. In fact, a programmable thermostat can be used for air conditioning, heating, ventilation or with several other components in your home. Its use is particularly recommended for ceiling fans. There are many models on the market and we can help you choose the one that best suits your needs.

Here is a simple 5 step process to easily install a thermostat yourself. If this is replacing an existing non-programmable thermostat, the electric wiring required to connect the device is already in place. If not, we strongly recommend that you ask a qualified electrician.

WARNING: TO PREVENT ELECTROCUTION, DO NOT FORGET TO TURN THE POWER OFF BEFORE STARTING.

1. Choose a thermostat location

In order to assure proper room temperature, it is important to identify the ideal location of the thermostat. It must be easily accessible, at 5 feet (1.50 m) from the ground. You must also allow a space of at least 8 inches (20 cm) between the door opening and the thermostat. Avoid exposing the thermostat to direct sunlight, to air flows (doors, windows, etc.) as well as to heat sources.

2. Mark holes for the anchors

Remove the wall mounting plate from the thermostat and put it against the wall where you want the thermostat to go. Do not forget to pass the electrical wires through the opening (to ensure proper operation). With a screwdriver or a pencil, mark holes for the anchors that will be inserted in the drywall. Make sure the thermostat is level.

Page 1/2